Cambodia

This table includes the area, production and humidity of barley: winter barley sown before or during winter and spring barley sown in the spring. Cereal grains harvested just before maturity are also included in this table. Cereals harvested green or yellow as whole plant for fodder or renewable energy use are not included in this table. This indicator uses the concepts of "area under cultivation", "harvested production" and "humidity". 1) The "area under cultivation" corresponds: • before the harvest, to the sown area; • after the harvest, to the sown area excluding the non-harvested area (e.g. area ruined by natural disasters, area not harvested for economic reasons, etc.) 2) The "harvested production" corresponds to the production for which harvesting started in year N, even though harvesting may finish in year N+1 (N is the reference year for data published by Eurostat). 3) In order to facilitate the comparisons of production figures between the Members States the figures have been converted from national humidity degrees into the standard EU humidity (14%).

This data collection presents summary tables intended to give an overview of the uptake of organic farming within the whole European Union and in each several country, plus Norway and Switzerland. Organic farming has to be understood as a part of a sustainable farming system and a viable alternative to the more traditional approaches to agriculture. Data are available for the following indicators: 1. Number of registered organic operators (table 'Food_act2') 2. Number of registered operators processing and importing products issued from organic farming (table 'Food_act3') 3. Organic crop area (table 'Food_in_porg1') 4. Organic crop production and yields from fully converted areas (table 'Food_in_porg2') 5. Organic livestock (table 'Food_in_porg3') 6. Production of organic animal products (table 'Food_pd_dmorg') Detailed information on the indicators provided in this collection may be found in the document 'Organic farming_additional information' (please see under 'Annex' at the bottom of this page).

Crop statistics refer to the following types of annual data:area under cultivation, harvested production, yield,  humidity and main area for cereals and for other main field crops (mainly dried pulses, root crops, fodder and industrial crops);harvested area, harvested production and main area for vegetables ;production area, harvested production and main area for permanent crop. The data are provided at national level. For some products regional figures (NUTS 1 or 2) are available too. The areas  are expressed in 1 000 hectares,  the harvested quantities in 1 000 tonnes and the yields in t/ha. The production and yield data are available in EU standard humidity (apro_cpsh) and in national humidity (apro_cpnh). The information concerns more than 100 crop products. The earliest data are available from 1955 for cereals and from the early 1960's for fruits and vegetables. However, most Member States have started to send in data in the 1970's and 1980's. The statistical system has progressively improved and enlarged. The current Regulation (EC) No 543/2009 entered into force in January 2010. The annex was updated in 2015 through a Commission Delegated Regulation (EU) No 2015/1557. At present Eurostat receives and publishes harmonised statistical data from EU Member States, from the EFTA countries and from the candidate and potential candidate countries broken down in:17 categories and subcategories for cereals;29 categories and  subcategories for other main crops (mainly dry pulses and protein crops, root crops industrial crops and plants harvested green from arable land);40 categories and subcategories for vegetables;41 categories and subcategories for permanent crops;18 categories and subcategories for the Utilised Agricultural Area (UAA). For the full list of crops, please consult Annex. Some additional crops and transmission deadlines are covered by an ESS agreement on annual crop statistics. The main data sources are administrative records, surveys and expert estimates. National Statistical Institutes or Ministries of Agriculture are responsible for the national data collection in accordance with the Regulations and agreements in force. Eurostat is responsible for compiling the EU aggregates. Due to different revision policy for the EU aggregates and the Member States' data, there may be a difference between the EU aggregate and the sum of national data between updates. Regional metadata Please note that for paragraphs where no metadata for regional data has been specified the regional metadata is identical to the metadata for the national data.

Crop statistics refer to the following types of annual data: area under cultivation, harvested production, yield,  humidity and main area for cereals and for other main field crops (mainly dried pulses, root crops, fodder and industrial crops);harvested area, harvested production and main area for vegetables ;production area, harvested production and main area for permanent crop.The data are provided at national level. For some products regional figures (NUTS 1 or 2) are available too. The areas  are expressed in 1 000 hectares,  the harvested quantities in 1 000 tonnes and the yields in t/ha. The production and yield data are available in EU standard humidity (apro_cpsh) and in national humidity (apro_cpnh). The information concerns more than 100 crop products. The earliest data are available from 1955 for cereals and from the early 1960's for fruits and vegetables. However, most Member States have started to send in data in the 1970's and 1980's. The statistical system has progressively improved and enlarged. The current Regulation (EC) No 543/2009 entered into force in January 2010. The annex was updated in 2015 through a Commission Delegated Regulation (EU) No 2015/1557. At present Eurostat receives and publishes harmonised statistical data from 28 Member States, form the EFTA countries and from the candidate and potential candidate countries broken down in: 17 categories and subcategories for cereals;29 categories and  subcategories for other main crops (mainly dry pulses and protein crops, root crops industrial crops and plants harvested green from arable land);40 categories and subcategories for vegetables;41 categories and subcategories for permanent crops;18 categories and subcategories for the Utilised Agricultural Area (UAA). For the full list of crops, please consult Annex. Some additional crops and transmission deadlines are covered by an ESS agreement on annual crop statistics. The main data sources are administrative records, surveys and expert estimates. National Statistical Institutes or Ministries of Agriculture are responsible for the national data collection in accordance with the Regulations and agreements in force. Eurostat is responsible for drawing the EU aggregations. Regional metadata Please note that for paragraphs where no metadata for regional data has been specified the regional metadata is identical to the metadata for the national data.

Crop statistics refer to the following types of annual data: area under cultivation, harvested production, yield,  humidity and main area for cereals and for other main field crops (mainly dried pulses, root crops, fodder and industrial crops);harvested area, harvested production and main area for vegetables ;production area, harvested production and main area for permanent crop.The data are provided at national level. For some products regional figures (NUTS 1 or 2) are available too. The areas  are expressed in 1 000 hectares,  the harvested quantities in 1 000 tonnes and the yields in t/ha. The production and yield data are available in EU standard humidity (apro_cpsh) and in national humidity (apro_cpnh). The information concerns more than 100 crop products. The earliest data are available from 1955 for cereals and from the early 1960's for fruits and vegetables. However, most Member States have started to send in data in the 1970's and 1980's. The statistical system has progressively improved and enlarged. The current Regulation (EC) No 543/2009 entered into force in January 2010. The annex was updated in 2015 through a Commission Delegated Regulation (EU) No 2015/1557. At present Eurostat receives and publishes harmonised statistical data from 28 Member States, form the EFTA countries and from the candidate and potential candidate countries broken down in: 17 categories and subcategories for cereals;29 categories and  subcategories for other main crops (mainly dry pulses and protein crops, root crops industrial crops and plants harvested green from arable land);40 categories and subcategories for vegetables;41 categories and subcategories for permanent crops;18 categories and subcategories for the Utilised Agricultural Area (UAA). For the full list of crops, please consult Annex. Some additional crops and transmission deadlines are covered by an ESS agreement on annual crop statistics. The main data sources are administrative records, surveys and expert estimates. National Statistical Institutes or Ministries of Agriculture are responsible for the national data collection in accordance with the Regulations and agreements in force. Eurostat is responsible for drawing the EU aggregations. Regional metadata Please note that for paragraphs where no metadata for regional data has been specified the regional metadata is identical to the metadata for the national data.

Crop statistics refer to the following types of annual data: area under cultivation, harvested production, yield,  humidity and main area for cereals and for other main field crops (mainly dried pulses, root crops, fodder and industrial crops);harvested area, harvested production and main area for vegetables ;production area, harvested production and main area for permanent crop.The data are provided at national level. For some products regional figures (NUTS 1 or 2) are available too. The areas  are expressed in 1 000 hectares,  the harvested quantities in 1 000 tonnes and the yields in t/ha. The production and yield data are available in EU standard humidity (apro_cpsh) and in national humidity (apro_cpnh). The information concerns more than 100 crop products. The earliest data are available from 1955 for cereals and from the early 1960's for fruits and vegetables. However, most Member States have started to send in data in the 1970's and 1980's. The statistical system has progressively improved and enlarged. The current Regulation (EC) No 543/2009 entered into force in January 2010. The annex was updated in 2015 through a Commission Delegated Regulation (EU) No 2015/1557. At present Eurostat receives and publishes harmonised statistical data from 28 Member States, form the EFTA countries and from the candidate and potential candidate countries broken down in: 17 categories and subcategories for cereals;29 categories and  subcategories for other main crops (mainly dry pulses and protein crops, root crops industrial crops and plants harvested green from arable land);40 categories and subcategories for vegetables;41 categories and subcategories for permanent crops;18 categories and subcategories for the Utilised Agricultural Area (UAA). For the full list of crops, please consult Annex. Some additional crops and transmission deadlines are covered by an ESS agreement on annual crop statistics. The main data sources are administrative records, surveys and expert estimates. National Statistical Institutes or Ministries of Agriculture are responsible for the national data collection in accordance with the Regulations and agreements in force. Eurostat is responsible for drawing the EU aggregations. Regional metadata Please note that for paragraphs where no metadata for regional data has been specified the regional metadata is identical to the metadata for the national data.

Crop statistics refer to the following types of annual data:area under cultivation, harvested production, yield,  humidity and main area for cereals and for other main field crops (mainly dried pulses, root crops, fodder and industrial crops);harvested area, harvested production and main area for vegetables ;production area, harvested production and main area for permanent crop. The data are provided at national level. For some products regional figures (NUTS 1 or 2) are available too. The areas  are expressed in 1 000 hectares,  the harvested quantities in 1 000 tonnes and the yields in t/ha. The production and yield data are available in EU standard humidity (apro_cpsh) and in national humidity (apro_cpnh). The information concerns more than 100 crop products. The earliest data are available from 1955 for cereals and from the early 1960's for fruits and vegetables. However, most Member States have started to send in data in the 1970's and 1980's. The statistical system has progressively improved and enlarged. The current Regulation (EC) No 543/2009 entered into force in January 2010. The annex was updated in 2015 through a Commission Delegated Regulation (EU) No 2015/1557. At present Eurostat receives and publishes harmonised statistical data from 28 Member States, form the EFTA countries and from the candidate and potential candidate countries broken down in:17 categories and subcategories for cereals;29 categories and  subcategories for other main crops (mainly dry pulses and protein crops, root crops industrial crops and plants harvested green from arable land);40 categories and subcategories for vegetables;41 categories and subcategories for permanent crops;18 categories and subcategories for the Utilised Agricultural Area (UAA). For the full list of crops, please consult Annex. Some additional crops and transmission deadlines are covered by an ESS agreement on annual crop statistics. The main data sources are administrative records, surveys and expert estimates. National Statistical Institutes or Ministries of Agriculture are responsible for the national data collection in accordance with the Regulations and agreements in force. Eurostat is responsible for drawing the EU aggregations. Regional metadata Please note that for paragraphs where no metadata for regional data has been specified the regional metadata is identical to the metadata for the national data.

The dataset includes data on gross and net production indices for various food and agriculture aggregates expressed in both totals and per capita.

This table includes the area, production and humidity of maize harvested for grain, as seed or as corn-cob-mix. In particular, grain maize harvested by hand, corn-picker, corn-sheller or combine harvester, regardless of the use, including grain for silage. Also grain harvested together with parts of the cob, but with humidity higher than 20% and used for silage (so called corn-cob-mix, CCM – humidity 30-35%) is included here. Maize harvested green for fodder or for energy use and sweet maize are not included in this table. This indicator uses the concepts of "area under cultivation", "harvested production" and "humidity". 1) The "area under cultivation" corresponds: • before the harvest, to the sown area; • after the harvest, to the sown area excluding the non-harvested area (e.g. area ruined by natural disasters, area not harvested for economic reasons, etc.) 2) The "harvested production" corresponds to the production for which harvesting started in year N, even though harvesting may finish in year N+1 (N is the reference year for data published by Eurostat). 3) In order to facilitate the comparisons of production figures between the Members States the figures have been converted from national humidity degrees into the standard EU humidity (14%).

This table includes the productions of all grapes; in particular, for wine, for table use and for raisins. This indicator uses the concept of "harvested production" which corresponds to the production for which harvesting started in year N, even thought harvesting may finish in year N+1. So N is the reference year for data published by Eurostat.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The EU27 consolidated Supply, use and input-output tables describe by product and industry the production processes and the transactions in products of the European Union economy with great detail. The consolidated supply, use and input-output tables for the EU27 describe the aggregation of the 27 Member States data, from which the intra trade data has been treated. Data are presented in million Euro in current prices (basic prices and a transformation into purchaser's prices for the supply side). Geographic coverage: Member States of EU27 National accounts are compiled in accordance with the European System of Accounts - ESA 1995. The data is presented in a framework where the domestic part corresponds to the area of EU27, the import part corresponds to imports from outside of the area EU27. Annex B of the Regulation (EC) No 1392/2007 of the European Parliament and of the Council of 13 November 2007 amending Council Regulation (EC) No 2223/96 with respect to the transmission of national accounts data.

The domain VIT contains data on the structure of vineyards. The data are organised into 4 tables: Table 1: Wine-grower holdings by type of production at national and regional levelTable 2: Wine-grower holdings by size class (and aggregated type of production) at national levelTable 3: Wine-grower by degree of specialisation and size class at national levelTable 4: Main vine varieties by age class at national and regional level The Commission needs accurate information on the production potential of the EU vineyards in order to be able to manage properly the wine sector. For this reason all Member States having more than 500 ha of vines for other purposes than table grape production collect on a regular and continuous basis structural data on vineyards since 1979. From 2015 onwards the data are collected from national/regional vineyard registers, which are administrative registers containing information on wine-growing holdings.   Data are available for national level and for NUTS 1 and 2 levels.

Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements.Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics

This table includes the area, production and humidity of oats and spring cereal mixtures: oats and other cereals sown in the spring and grown as mixtures and harvested as dry grain, including seed. Cereal grains harvested just before maturity are also included in this table. Cereals harvested green or yellow as whole plant for fodder or renewable energy use are not included in this table. This indicator uses the concepts of "area under cultivation", "harvested production" and "humidity". 1) The "area under cultivation" corresponds: • before the harvest, to the sown area; • after the harvest, to the sown area excluding the non-harvested area (e.g. area ruined by natural disasters, area not harvested for economic reasons, etc.) 2) The "harvested production" corresponds to the production for which harvesting started in year N, even though harvesting may finish in year N+1 (N is the reference year for data published by Eurostat). 3) In order to facilitate the comparisons of production figures between the Members States the figures have been converted from national humidity degrees into the standard EU humidity (14%).

This table includes the productions of olives for olive oil and for table use. This indicator uses the concept of "harvested production" which corresponds to the production for which harvesting started in year N, even thought harvesting may finish in year N+1. So N is the reference year for data published by Eurostat.

Eurostat's database covers 1) Production and trade in roundwood and wood products, including primary and secondary products 2) Economic data on forestry and logging, including employment data 3) Sustainable forest management, comprising forest resources (assets) and environmental data. The main types of primary forest products included in (1) are: roundwood, sawnwood, wood-based panels, pulp, and paper and paperboard. Secondary products include further processed wood and paper products. These products are presented in greater detail; definitions are available. All of the data are compiled from the Joint Forest Sector Questionnaire (JFSQ), except for table (e), which is directly extracted from Eurostat's international trade database COMEXT (HS/CN Chapter 44). The tables in (1) cover details of the following topics: - Roundwood removals and production by type of wood and assortment (a) - Roundwood production by type of ownership (b) - Production and trade in roundwood, fuelwood and other basic products (c) - Trade in industrial roundwood by assortment and species (d) - Tropical wood imports to the EU from Chapter 44 of the Harmonised System (e) - Production and trade in sawnwood, panels and other primary products (f) - Sawnwood trade by species (g) - Production and trade in pulp and paper & paperboard (h) - Trade in secondary wood and paper products (i) Data in (2) include the output, intermediate consumption, gross value added, fixed capital consumption, gross fixed capital formation and different measures of income of forestry and logging.  The data are in current basic prices and are compatible with National Accounts. They are collected as part of Intergrated environmental and economic accounting for forests (IEEAF), which also covers labour input in annual work units (AWU).  Under (2), two separate tables cover the number of employees of forestry and logging, the manufacture of wood and products of wood and cork, and the manufacture of paper and paper products, as estimated from the Labour Force Survey results. There are two separate tables because of the change in the EU's classification of economic activities from NACE Rev. 1.1 to NACE Rev. 2 in 2008. More detailed information on wood products and accounting, including definitions and questionnaires, can be found on our open-access communication platform under the interest group 'Forestry statistics and accounts'.  Data in (3) are not collected by Eurostat, but by the FAO, UNECE, Forest Euope, the European Commission's departments for Environment and the Joint Research Centre. They include forest area, wood volume, defoliation on sample plots, fires and areas with protective functions.

The EU Agricultural Price Indices (output and input) comprise:the index of producer prices of agricultural products;the index of purchase prices of the means of agricultural production. The purpose of the price indices is to provide information on trends in producer prices of agricultural products and purchase prices of the means of agricultural production. They are intended to permit a comparison of these trends both between the various Member States and the European Union as a whole and between the different products within a Member State or the European Union. They are also intended to facilitate comparisons between trends in producer prices and trends in purchase prices of the means of agricultural production. They cannot, however, express differences between the Member States in terms of absolute agricultural price levels The following points should be borne in mind when interpreting the EU Agricultural Price Indices:As regards spatial comparisons, the structures of the weights with respect to products and means of production reflect the value of the sales and purchases in each country during the base year. The weights therefore differ from one country to another and this obviously has an effect on trends in the aggregate indices.In comparing the trends in output prices with those in input prices, the field of observation of the latter does not cover, as will be seen later, the whole of the operating expenditure of the agricultural sector.The comparison between quarterly price indices can be made only between the corresponding quarters of different years. The reason is the variation of the weights from quarter to quarter for the output products. In the majority of Member States, national indices of agricultural prices may differ from the EU Agricultural Price Indices in respect of their base, formula or field of observation. Please take note that, currently, 2010=100 EU28 aggregation does not include Estonia.

The indices in this table give information on the trends in the producer prices of agricultural production as a whole. The sub-indices were weighted by the values of sales in 2000.

Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements. Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics <

The production in construction shows the output and activity of the construction sector. It measures changes in the volume of output on a monthly basis. Construction includes building construction and civil engineering. The construction sector in total corresponds to the NACE Rev. 2 section F but the split between building construction and civil engineering is based on the Classification of types of Construction (CC1, CC2). Production in construction is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

The industrial production index shows the output and activity of the industry sector. It measures changes in the volume of output on a monthly basis. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial production is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The industrial production index shows the output and activity of the industry sector. It measures changes in the volume of output on a monthly basis. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial production is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The industrial production index shows the output and activity of the industry sector. It measures changes in the volume of output on a monthly basis. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial production is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The industrial production index shows the output and activity of the industry sector. It measures changes in the volume of output on a monthly basis. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial production is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The industrial production index shows the output and activity of the industry sector. It measures changes in the volume of output on a monthly basis. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial production is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The industrial production index shows the output and activity of the industry sector. It measures changes in the volume of output on a monthly basis. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial production is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

The industrial production index shows the output and activity of the industry sector. It measures changes in the volume of output on a monthly basis. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial production is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

This indicator covers the carcass weight of bovine animals (calves, bullocks, bulls, heifers and cows) slaughtered in slaughterhouses and on the farm, whose meat is declared fit for human consumption.

This indicator expresses the total carcass weight of pigs slaughtered in slaughterhouses and on the farm, whose meat is declared fit for human consumption.

Total carcass weight of poultry slaughtered whose meat is declared fit for human consumption. The following poultry is included: hens, chicken, ducks, turkey, guinea fowls, geese. This indicator covers mainly the production of gallinaceae including broilers.

This indicator covers the carcass weight of sheep, including lambs, and goats slaughtered in slaughterhouses or elsewhere whose meat is declared fit for human consumption.

18.1. Source data

This dataset provides estimates of the production, value added, exports and employment of the environmental goods and services sector (EGSS). The EGSS is the part of the economy that generate environmental products, i.e. those produced for the purpose of environmental protection and resource management. Environmental protection includes all activities and actions which have as their main purpose the prevention, reduction and elimination of pollution and of any other degradation of the environment. Those activities and actions include all measures taken in order to restore the environment after it has been degraded. Resource management includes the preservation, maintenance and enhancement of the stock of natural resources and therefore the safeguarding of those resources against depletion. The EGSS accounts are produced in accordance with the statistical concepts and definitions set out in the system of environmental economic accounting 2012 – central framework (SEEA CF 2012, see annex). Datasets env_ac_egss1 and env_ac_egss2 consist of country data produced by the Member States, who transmit the data to Eurostat and further disseminates it. The EU estimates in datasets env_ac_egss1, env_ac_egss2 and env_ac_egss3 are produced by Eurostat not as a sum of available countries but using methods documented in the Eurostat EGSS practical guide (see methodology page) and data sources publicly available. In addition, Eurostat produces output and gross value added volume estimates, i.e. discounting changes in prices, for all countries published in dataset env_ac_egss2.

The indices in this table give information on the trends in the purchase prices of the means of agricultural production as a whole. The sub-indices were weighted by the values of purchases in 2000.

This table includes the area, production and humidity of rye and winter cereal mixtures: rye, mixtures of "rye and other cereals" and "other cereal mixtures" sown before or during the winter (maslin). Cereal grains harvested just before maturity are also included in this table. Cereals harvested green or yellow as whole plant for fodder or renewable energy use are not included in this table. This indicator uses the concepts of "area under cultivation", "harvested production" and "humidity". 1) The "area under cultivation" corresponds: • before the harvest, to the sown area; • after the harvest, to the sown area excluding the non-harvested area (e.g. area ruined by natural disasters, area not harvested for economic reasons, etc.) 2) The "harvested production" corresponds to the production for which harvesting started in year N, even though harvesting may finish in year N+1 (N is the reference year for data published by Eurostat). 3) In order to facilitate the comparisons of production figures between the Members States the figures have been converted from national humidity degrees into the standard EU humidity (14%).

Supply Utilization Accounts and Food Balance Sheet present a comprehensive picture of the pattern of a country's food supply during a specified reference period. The food balance sheet shows for each food item - i.e. each primary commodity and a number of processed commodities potentially available for human consumption - the sources of supply and its utilization. The total quantity of foodstuffs produced in a country added to the total quantity imported and adjusted to any change in stocks that may have occurred since the beginning of the reference period gives the supply available during that period. On the utilization side a distinction is made between the quantities exported, fed to livestock, used for seed, put to manufacture for food use and non-food uses, losses during storage and transportation, and food supplies available for human consumption. The per caput supply of each such food item available for human consumption is then obtained by dividing the respective quantity by the related data on the population actually partaking of it. Data on per caput food supplies are expressed in terms of quantity and - by applying appropriate food composition factors for all primary and processed products - also in terms of caloric value and protein and fat content.

The Economic Accounts for Agriculture (EAA) provide detailed information on income in the agricultural sector. The purpose is to analyse the production process of the agricultural industry and the primary income generated by this production. The accounts are therefore based on the industry concept. The EAA accounts are detailed data on value of output (producer prices and basic prices), intermediate consumption, subsidies and taxes, consumption of fixed capital, rent and interests, capital formation etc. The values are in current as well as in constant prices. Agricultural Labour Input (ALI) and Unit Values (UV) are an integrated part of the overall concept of Economic Accounts for Agriculture. The Economic accounts for agriculture (EAA) are a satellite account of the European System of Accounts (ESA2010), providing complementary information and concepts adapted to the particular nature of the agricultural industry. Although their structure very closely matches that of the national accounts, their compilation requires the formulation of appropriate rules and methods. National Statistical Institutes or Ministries of Agriculture are responsible for data collection and calculation of national EAA, in accordance with EC Regulations. Eurostat is responsible for the EU aggregations. Regional data EAA accounts are compiled at regional level (NUTS2), but only in values in current prices. The labour input data and Unit values are not broken down to regional level. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data. Frequency of data collection for data under Regulation (EC) 138/2004 and gentlemen's agreement, deadline for transmission for years 2015-2016.

The EU Agricultural Price Indices (output and input) comprise:the index of producer prices of agricultural products;the index of purchase prices of the means of agricultural production. The purpose of the price indices is to provide information on trends in producer prices of agricultural products and purchase prices of the means of agricultural production. They are intended to permit a comparison of these trends both between the various Member States and the European Union as a whole and between the different products within a Member State or the European Union. They are also intended to facilitate comparisons between trends in producer prices and trends in purchase prices of the means of agricultural production. They cannot, however, express differences between the Member States in terms of absolute agricultural price levels The following points should be borne in mind when interpreting the EU Agricultural Price Indices:As regards spatial comparisons, the structures of the weights with respect to products and means of production reflect the value of the sales and purchases in each country during the base year. The weights therefore differ from one country to another and this obviously has an effect on trends in the aggregate indices.In comparing the trends in output prices with those in input prices, the field of observation of the latter does not cover, as will be seen later, the whole of the operating expenditure of the agricultural sector.The comparison between quarterly price indices can be made only between the corresponding quarters of different years. The reason is the variation of the weights from quarter to quarter for the output products. In the majority of Member States, national indices of agricultural prices may differ from the EU Agricultural Price Indices in respect of their base, formula or field of observation. Please take note that, currently, 2010=100 EU28 aggregation does not include Estonia.

The EU Agricultural Price Indices (output and input) comprise:the index of producer prices of agricultural products;the index of purchase prices of the means of agricultural production. The purpose of the price indices is to provide information on trends in producer prices of agricultural products and purchase prices of the means of agricultural production. They are intended to permit a comparison of these trends both between the various Member States and the European Union as a whole and between the different products within a Member State or the European Union. They are also intended to facilitate comparisons between trends in producer prices and trends in purchase prices of the means of agricultural production. They cannot, however, express differences between the Member States in terms of absolute agricultural price levels The following points should be borne in mind when interpreting the EU Agricultural Price Indices:As regards spatial comparisons, the structures of the weights with respect to products and means of production reflect the value of the sales and purchases in each country during the base year. The weights therefore differ from one country to another and this obviously has an effect on trends in the aggregate indices.In comparing the trends in output prices with those in input prices, the field of observation of the latter does not cover, as will be seen later, the whole of the operating expenditure of the agricultural sector.The comparison between quarterly price indices can be made only between the corresponding quarters of different years. The reason is the variation of the weights from quarter to quarter for the output products. In the majority of Member States, national indices of agricultural prices may differ from the EU Agricultural Price Indices in respect of their base, formula or field of observation. Please take note that, currently, 2010=100 EU28 aggregation does not include Estonia.

The domain VIT contains data on the structure of vineyards. The data are organised into 4 tables:Table 1: Wine-grower holdings by type of production at national and regional levelTable 2: Wine-grower holdings by size class (and aggregated type of production) at national levelTable 3: Wine-grower by degree of specialisation and size class at national levelTable 4: Main vine varieties by age class at national and regional level The Commission needs accurate information on the production potential of the EU vineyards in order to be able to manage properly the wine sector. For this reason all Member States having more than 500 ha of vines for other purposes than table grape production collect on a regular and continuous basis structural data on vineyards since 1979. From 2015 onwards the data are collected from national/regional vineyard registers, which are administrative registers containing information on wine-growing holdings.   Data are available for national level and for NUTS 1 and 2 levels.

The domain VIT contains data on the structure of vineyards. The data are organised into 4 tables: Table 1: Wine-grower holdings by type of production at national and regional levelTable 2: Wine-grower holdings by size class (and aggregated type of production) at national levelTable 3: Wine-grower by degree of specialisation and size class at national levelTable 4: Main vine varieties by age class at national and regional level The Commission needs accurate information on the production potential of the EU vineyards in order to be able to manage properly the wine sector. For this reason all Member States having more than 500 ha of vines for other purposes than table grape production collect on a regular and continuous basis structural data on vineyards since 1979. From 2015 onwards the data are collected from national/regional vineyard registers, which are administrative registers containing information on wine-growing holdings.   Data are available for national level and for NUTS 1 and 2 levels.

The domain VIT contains data on the structure of vineyards. The data are organised into 4 tables:Table 1: Wine-grower holdings by type of production at national and regional levelTable 2: Wine-grower holdings by size class (and aggregated type of production) at national levelTable 3: Wine-grower by degree of specialisation and size class at national levelTable 4: Main vine varieties by age class at national and regional level The Commission needs accurate information on the production potential of the EU vineyards in order to be able to manage properly the wine sector. For this reason all Member States having more than 500 ha of vines for other purposes than table grape production collect on a regular and continuous basis structural data on vineyards since 1979. From 2015 onwards the data are collected from national/regional vineyard registers, which are administrative registers containing information on wine-growing holdings.   Data are available for national level and for NUTS 1 and 2 levels.