Liberia

The data are three-month interbank rates which are no longer updated. The series represent interest rates of countries which have now joined the euro area.

The 3-months interest rate is a representative short-term interest rate series for the domestic money market. From January 1999, the euro area rate is the 3-month "EURo InterBank Offered Rate" (EURIBOR) EURIBOR is the benchmark rate of the large euro money market that has emerged since 1999. It is the rate at which euro InterBank term deposits are offered by one prime bank to another prime bank. The contributors to EURIBOR are the banks with the highest volume of business in the euro area money markets. The panel of banks consists of banks from EU countries participating in the euro from the outset, banks from EU countries not participating in the euro from the outset, and large international banks from non-EU countries but with important euro area operations. Monthly data are calculated as averages of daily values. Data are presented in raw form. Source: European Central Bank (ECB)

Data Cited at: The African Development Bank: African Development Bank, Bank Operations 2016: https://dataportal.opendataforafrica.org/gsrolxg/african-development-bank-bank-operations-2016

Data cited at: The African Development Bank: African Development Bank, Food Security: https://dataportal.opendataforafrica.org/qhrkxae/african-development-bank-food-security-december-2011 African Development Bank, Food Security

The Air transport domain contains national and international intra and extra-EU data. This provides air transport data for passengers (in number of passengers) and for freight and mail (in 1 000 tonnes) as well as air traffic data by airports, airlines and aircraft. Data are transmitted to Eurostat by EU Member States, EFTA countries and some other reporting cuntries. Data are compiled following the provisions of the Regulation (EC) N°1358/2003, implementing Regulation N°437/2003 of the European Parliament and of the Council on statistical returns in respect of the carriage of passengers, freight and mail by air.  The air transport data are collected at airport level. As from 2003 reference year the data are provided according to the legal act (some countries were given derogation until 2005). Until 2002 partial information (passenger transport only) are available for some countries and airports. Airports handling less than 15 000 passenger units annually are excluded from the scope of the Regulation. Datasets A1 and B1 are provided on monthly basis, while dataset C1 can be provided either on monthly or annual basis. For some countries optional variable - total number of transfer passengers - is provided as well. The data are disseminated by Eurostat in on-line database in four sub-domains:Air Transport measurement - PassengersAir Transport measurement - Freight and mailAir Transport measurement - Traffic data by airports, aircraft and airlinesAir Transport measurement - Data aggregated at standard regional levels (NUTS). The two first domains contain several data collections:Overview of the air transport by country and airport,National air transport by country and airport,International intra-EU air transport by country and airport,International extra-EU air transport by country and airport,Detailed air transport by reporting country and routes. In the tables of the sub-domain "Transport measurement - Passengers", data are broken down by passengers on board (arrivals, departures and total), passengers carried (arrivals, departures and total) and passenger commercial air flights (arrival, departures and total). Additionally, the tables of collection "Detailed air transport by reporting country and routes" provide data on seats available (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Freight and mail", data are broken down by freight and mail on board (arrival, departures and total), freight and mail loaded/unloaded (loaded, unloaded and total) and all-freight and mail commercial air flights (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Traffic by airports, aircraft and airlines": - Data by type of aircraft are broken down by total passengers on board, total freight and mail on board in tonnes, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by type of airline are broken down by total passengers on board, total passengers carried, total freight and mail on board, total freight and mail loaded/unloaded, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by airport are  broken down by total passengers carried, total transit passengers, total transfer passengers, total freight and mail loaded/unloaded, total commercial aircraft movements, total aircrafts movements. the data is presented at monthly, quarterly and annual level. The sub-domain "Transport measurement - Data aggregated at standard regional levels (NUTS)", contains two tables:Air transport of passengers at regional levelAir transport of freight at regional level The tables present the evolution of the number of passengers carried (if not available passengers on board) and the volume of freight and mail loaded or unloaded (if not available freight and mail on board) to/from the NUTS regions (level 2, 1 and 0) since 1999. The data is presented at annual level. The air transport regional data have been calculated using data collected at the airport level in the frame of the regulatory data collection on air transport. More information can be found in Regional transport statistics metadata file. For more details on datasets, data validation and issemination refer also to  Reference Manual on Air Transport Statistics available in the Annex part of the metadata.

The Air transport domain contains national and international intra and extra-EU data. This provides air transport data for passengers (in number of passengers) and for freight and mail (in 1 000 tonnes) as well as air traffic data by airports, airlines and aircraft. Data are transmitted to Eurostat by EU Member States, EFTA countries and some other reporting cuntries. Data are compiled following the provisions of the Regulation (EC) N°1358/2003, implementing Regulation N°437/2003 of the European Parliament and of the Council on statistical returns in respect of the carriage of passengers, freight and mail by air.  The air transport data are collected at airport level. As from 2003 reference year the data are provided according to the legal act (some countries were given derogation until 2005). Until 2002 partial information (passenger transport only) are available for some countries and airports. Airports handling less than 15 000 passenger units annually are excluded from the scope of the Regulation. Datasets A1 and B1 are provided on monthly basis, while dataset C1 can be provided either on monthly or annual basis. For some countries optional variable - total number of transfer passengers - is provided as well. The data are disseminated by Eurostat in on-line database in four sub-domains:Air Transport measurement - PassengersAir Transport measurement - Freight and mailAir Transport measurement - Traffic data by airports, aircraft and airlinesAir Transport measurement - Data aggregated at standard regional levels (NUTS). The two first domains contain several data collections:Overview of the air transport by country and airport,National air transport by country and airport,International intra-EU air transport by country and airport,International extra-EU air transport by country and airport,Detailed air transport by reporting country and routes. In the tables of the sub-domain "Transport measurement - Passengers", data are broken down by passengers on board (arrivals, departures and total), passengers carried (arrivals, departures and total) and passenger commercial air flights (arrival, departures and total). Additionally, the tables of collection "Detailed air transport by reporting country and routes" provide data on seats available (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Freight and mail", data are broken down by freight and mail on board (arrival, departures and total), freight and mail loaded/unloaded (loaded, unloaded and total) and all-freight and mail commercial air flights (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Traffic by airports, aircraft and airlines": - Data by type of aircraft are broken down by total passengers on board, total freight and mail on board in tonnes, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by type of airline are broken down by total passengers on board, total passengers carried, total freight and mail on board, total freight and mail loaded/unloaded, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by airport are  broken down by total passengers carried, total transit passengers, total transfer passengers, total freight and mail loaded/unloaded, total commercial aircraft movements, total aircrafts movements. the data is presented at monthly, quarterly and annual level. The sub-domain "Transport measurement - Data aggregated at standard regional levels (NUTS)", contains two tables:Air transport of passengers at regional levelAir transport of freight at regional level The tables present the evolution of the number of passengers carried (if not available passengers on board) and the volume of freight and mail loaded or unloaded (if not available freight and mail on board) to/from the NUTS regions (level 2, 1 and 0) since 1999. The data is presented at annual level. The air transport regional data have been calculated using data collected at the airport level in the frame of the regulatory data collection on air transport. More information can be found in Regional transport statistics metadata file. For more details on datasets, data validation and issemination refer also to  Reference Manual on Air Transport Statistics available in the Annex part of the metadata.

Accommodation statistics are a key part of the system of tourism statistics in the EU and have a long history of data collection. Annex I of the Regulation (EU) 692/2011 of the European Parliament and of the Council deals with accommodation statistics and includes 4 sections focusing on accommodation statistics of which sections 1 and 2 include the requirements concerning rented accommodation (capacity and occupancy respectively). Data are collected by the competent national authorities of the Member States and are compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Most of the time, data are collected via sample or census surveys. However, in a few cases data are compiled from a demand-side perspective (i.e. via visitor surveys or border surveys). Surveys on the occupancy of accommodation establishments are generally conducted on a monthly basis. The concepts and definitions used in the collection of data shall conform to the specifications described in the Methodological manual for tourism statistics. Accommodation statistics comprise the following information: Monthly data on tourism industries (NACE 55.1, 55.2 and 55.3) Monthly occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Net occupancy rate of bed-places and bedrooms in hotels and similar accommodation Annual data on tourism industries(NACE 55.1, 55.2 and 55.3) Occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Capacity of tourist accommodation establishments: number of establishments, bedrooms and bed places Regional data  Annual occupancy (arrivals and nights spent by residents and non-residents) of tourist accommodation establishments at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Annual data on number of establishments, bedrooms and bed places at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Data on number of establishments, bedrooms and bed places are available by activity at NUTS 3 level until 2011. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

Eurostat Dataset Id:tour_occ_arnrmw National data Monthly and annual data on arrivals, nights spent and occupancy rates at tourist accommodation establishments. Regional data Annual arrivals, nights spent at tourist accommodation establishments at NUTS 2 level. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

Data series on asylum applications contain statistical information based on Article 4 of the Council Regulation (EC) No 862/2007 with reference to:Asylum and first time asylum applicants by age, sex and citizenshipPersons subject to applications pending at the end of reference period by age, sex and citizenshipApplications for asylum withdrawn by age, sex and citizenshipAsylum applicants considered to be unaccompanied minors by age, sex and citizenship These data are supplied to Eurostat by the national Ministries of Interior and related official agencies. Data is presented by country and for groups of countries: the European Union (EU28, EU27) and the European Free Trade Association (EFTA). Data has been rounded to the nearest 5.

Asylum applicant means a person having submitted an application for international protection or having been included in such application as a family member during the reference period. New asylum applicant means a person having submitted an application for international protection for the first time.

The Balance of Payments (BOP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of an economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, primary and secondary income), as well as on transactions which fall in the capital and the financial account. International investment position presents value of financial assets owned outside the economy and indebtedness of the economy to the rest of the world. BOP is an important macro-economic indicator used to assess the position of an economy (of credit or debit for current and capital acount, net acquisition of financial assets or net incurrence of liabilities for BOP financial account and international investment position) towards the external world. Out of BOP data, some indicators on international position of the EU and Member States are derived. Indicators on Main Balance of Payments and International Investment Position items as share of GDP are presented as percentage of GDP for given year or quarter and moving average for 3 consecutive years for:balance, credit and debit flows of current and capital accounts and of main current account  items: goods, services, primary and secondary income,net flows, net acquisition of financial assets and net incurrence of liabilities for total financial account and foreign direct investment, international investment position and net external debt at the end of reference quarter or year. Indicators on export market shares present shares of each EU Member State in total world exports of goods and services for given year, and 1-year and 5-year percentage changes of these shares, as well as shares in OECD exports and 5-year percentage changes of these shares.

Eurostat Dataset Id:bop_euins_m Balance of Payments data for the European Institutions (BoP EUI) are a complete data-set of Balance of Payments data where the European Institutions are the reporter and the partners are all the Member States and all the other countries in the world. In more concrete terms, BoP of the EU Institutions (EUI) provides information on money received (credits) and money spent (debits) by the EU Institutions. In the compilation of BoP EUI, Eurostat follows the methodology defined in the fifth IMF Balance of Payments Manual (BPM5) and the prescriptions provided by the European System of Accounts (ESA95).  The balance of payments (BoP) is a statistical statement that systematically summarizes, over a given period of time, all the transactions of an economy (the EU institutions) with the rest of the world (each of the EU Member States and each of the countries with whom the EU institutions have economic transactions). The balance of payments provides information on the total value of credits (flow 2, exports/money received) and debits (flow 3, imports/money spent) for each BoP item and on the net result or "balance" (flow 4, credits minus debits) of the transactions with each partner. Credits and debits are expressed in Euro. The BoP EUI is complemented by the statistics related to the International Investment Position (IIP) of the EUI that provides information on the stocks (flow 8) of assets and liabilities at the end of each year. The position (or stocks) at the end of each specific period reflects financial transactions (flow 2, 3 and 4), valuation changes and other adjustments (flows 5, 6 and 7) that occurred during the period and affected the level of assets or liabilities. The Balance of Payments accounts are constructed on a double-entry accounting system. When the EU Institutions buy a service (e.g. rent a building) from a Member State, they will pay via a credit transfer from a bank account. BoP EUI will record this transaction twice, once as a service import/Debit in the Current Account, once as a decrease (Flow 2/credits) in Assets, Currency and Deposits, Financial Account.  

The Balance of Payments is the statistical statement that systematically summarises transactions between residents and non-residents. It consists of the goods and services account, the primary income account, the secondary income account, the capital account and the financial account (BPM6 – 2.12) The capital account in the international accounts shows a) capital transfers receivable and payable between residents and nonresidents and b) the acquisition and disposal of nonproduced, nonfinancial assets between residents and nonresidents (BPM6- 13.1). The capital transfers are transfers in which the ownership of an asset (other than cash or inventories) changes from one party to another. The sum of the balances on the current and capital accounts represents the net lending (surplus) or net borrowing (deficit) by the economy with the rest of the world (BPM6 – 2.18). Source of euro area data: European Central Bank (ECB).

The Balance of Payments is the statistical statement that systematically summarises transactions between residents and non-residents. It consists of the goods and services account, the primary income account, the secondary income account, the capital account and the financial account (BPM6 – 2.12) The current account is an important grouping of accounts within the Balance of Payments. The current account balance shows the difference between the sum of exports and income receivable and the sum of imports and income payable (exports and imports refer to both goods and services, while income refers to both primary and secondary income). The value of current account balance equals the saving-investment gap for the economy. The balance of current account is thus related to understanding domestic transactions (BPM6 – 2.15). Data are expressed in million euros. Data are presented in raw form. Source of euro area data: European Central Bank (ECB).

The Balance of Payments is the statistical statement that systematically summarises transactions between residents and non-residents. It consists of the goods and services account, the primary income account, the secondary income account, the capital account and the financial account (BPM6 – 2.12) The capital account in the international accounts shows a) capital transfers receivable and payable between residents and nonresidents and b) the acquisition and disposal of nonproduced, nonfinancial assets between residents and nonresidents (BPM6- 13.1). The capital transfers are transfers in which the ownership of an asset (other than cash or inventories) changes from one party to another. The sum of the balances on the current and capital accounts represents the net lending (surplus) or net borrowing (deficit) by the economy with the rest of the world (BPM6 – 2.18). Source of euro area data: European Central Bank (ECB).

The Balance of Payments is the statistical statement that systematically summarises transactions between residents and non-residents. It consists of the goods and services account, the primary income account, the secondary income account, the capital account and the financial account (BPM6 – 2.12) The financial account shows net acquisition and disposal of financial assets and liabilities The financial account indicates the functional categories, sectors, instruments, and maturities used for net international financing transactions. (BPM6 – 8.1). Five functional categories of investment are distinguished in the international accounts: a) direct investment, b) portfolio investment, c) financial derivatives and employee stock options, d) other investment and e) reserve assets. (BPM6 – 6.1). Source of euro area data: European Central Bank (ECB).

The International trade balance indicator is the difference between exports and imports of goods. Exports of goods record flows from an EA/EU Member State to a non-EA/EU country while imports record inwards flows. Exports are expressed in value terms and measured free on board (FOB), while imports are expressed in value terms and measured "cost, insurance, freight" (CIF ). "Goods" means all movable property including electric current. Data are expressed in million euros. Data are presented in the calendar and seasonally adjusted form.

The International trade balance indicator is the difference between exports and imports of goods. Exports of goods record flows from an EA/EU Member State to a non-EA/EU country while imports record inwards flows. Exports are expressed in value terms and measured free on board (FOB), while imports are expressed in value terms and measured "cost, insurance, freight" (CIF ). "Goods" means all movable property including electric current. Data are expressed in million euros. Data are presented in the calendar and seasonally adjusted form.

The collection of 'Telecommunication Services' statistics covers the following indicators: (1) Employment in telecommunication The indicator gives the total number of people employed in telecommunication services and the number of people employed in fixed and mobile telecommunication and Internet service provision. Employment is converted into full time equivalent units, average of the year. (2) Investment The indicator gives the total gross investment (in Mio euro) in tangible goods i.e. investment for acquiring property (land and buildings) and plant (e.g. switching equipment, transmission equipment, office machinery, and motor vehicles), and investment in fixed telecommunication networks (excluding cable TV services), mobile telecommunications: GSM and GPRS, mobile telecommunications: UMTS (excluding licenses), and in other telecommunication networks (Internet, satellite and cable telecommunication equipment and infrastructure other than for broadcasting). (3) Turnover The indicator gives the total turnover (in Mio euro) from all telecommunication services and turnover from leased lines, fixed network services, cellular mobile telecommunication services, interconnection services and Internet service provision. (4) International receipts and payments The indicator gives the total revenue (receipts, payments) from international incoming and outgoing telecommunication traffic, in Mio euro. Incoming telecommunication traffic: income received from foreign telephone operators for completing calls originating in foreign country. Outgoing telecommunication traffic: charges received from subscribers for placing outgoing calls after deduction of the share of this income to be paid to other organisation for outgoing telecommunication traffic (operators of the incoming and possibly transit countries). (5) International calls The indicator gives the amount (in 1000 minutes) of international incoming (originating outside the country with a destination inside the country) and outgoing (originating inside the country to destinations outside the country) calls in fixed and cellular networks. (6) Traffic The indicator gives the total amount of national calls and the amount of local calls, national long distance calls, cellular mobile calls, minutes of internet connection, calls from fixed to mobile and mobile to fixed networks, calls within mobile networks and calls from mobile to mobile networks (in 1000 minutes). (7) SMS (short message service) The indicator gives the total number of SMS (text messages) sent (in thousands). (8) Access to networks (in thousands) The indicator gives the number of main telephone lines and subscriptions to the services of the operators offering mobile telecommunication services and the number of leased lines, ISDN subscriptions, DSL subscriptions, Internet subscriptions and subscriptions to cable networks enabling internet use, number of connections to telecommunication networks through electricity networks (Power Line Communication - PLC), subscriptions to mobile telecommunication systems enabling use of UMTS and the number of users of Voice over Internet Protocol telephony, in thousands. (9) Access to networks (per 100 inhabitants) The indicator gives the number of main telephone lines and subscriptions to the services of the operators offering mobile telecommunication services per 100 inhabitants. (10) Household share of main telephone lines The indicator gives the share of main telephone lines for residential use (i.e. lines which are not used for business, government or other professional purposes or as public telephone stations) as a percentage of total main telephone lines. (11) Operators and service providers The indicator gives the number of fixed network operators offering local and long distance national telecommunications (facilities based or resale) and international telecommunications, and the number of cellular mobile operators (digital or analogous, facilities based or resale), cable and satellite service providers (excluding pure programme distribution) and internet service providers (access and backbone services). (12) Broadband penetration rate  This indicator shows how widely broadband access to the internet has spread in the countries on the general level, not specifying by user group. (13) Prices of telecommunication The indicator gives the price in Euro of a 10 minute call at 11 am on a weekday (including VAT) for a local call (3km), national long distance call (200km) and an international call (to USA). The prices refer to the month of August for the period 1998-2005, and to the month of September from 2006 onwards. Tariffs without special rates are used. (14) Market shares in telecommunication This covers two structural indicators: market share of the incumbent in fixed telecommunications by type of call (local, long distance and international calls) and market share of the leading operator in mobile telecommunications. (15) Information technology expenditure in millions of euro and as a percentage of GDP Data refer to the expenditure for information and communication technology in millions of euro and as a percentage of GDP, with breakdown by expenditure for telecommunications and IT expenditure. Data in millions of euro are coming from the annual report of the European Information Technology Observatory (EITO).

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

The objective of the building permit index is to show the future development of construction activity in terms of per square meter of useful floor. The current base year is 2015 (Index 2015 = 100). The index is presented in seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from raw data.

This dataset is updated with data obtained from Statistics Canada and the U.S. Census Bureau. Trade Data is updated on a monthly and annual basis, with revisions in March, April, May, August and November to previous year's data. Trade Data is available on both product and industry-based versions. The product Trade Data is classified by Harmonized System (HS) codes while the industry data is based on North American Industry Classification System(NAICS) classification codes. Source: Statistics Canada and the U.S.Census Bureau

This dataset provides detailed trade statistics on iron and steel commodities using the Harmonized System (HS) classification of goods (based on the 6-digit commodity level).

The data are central government bond yields which are no longer updated.

Preliminary Release: China's Total Export & Import Values ​​by Country/Region (in USD)

Climate Change Knowledge Portal, Temperature and Rainfall: Historical Data (CRU Observed)

Climate Change Knowledge Portal: CMIP6 Mean Projections

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. LU2 represents the share of the labour force that are either in unemployment or time-related underemployment. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. LU3 represents the share of the extended labour force that are in unemployment or the potential labour force. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. LU4 represents the share of the extended labour force that are in unemployment, time-related underemployment or the potential labour force. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

Business surveys provide a rapid means of compiling simple statistics with the results available before those of traditional statistical methods, and provide also information on areas not covered by quantitative statistics. Details provided by respondents are generally of very high quality since the questions related to subjects with which they are familiar, thus the past and future performance of their business is highly reliable. Similarly, consumers provide a very high quality information on their purchasing information and price trend. Source: DG ECFIN

Eurostat Dataset Id:ei_bsbu_m_r2 Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published:as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

Industry, Trade and Services statistics are part of Short-term statistics (STS), they give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification(Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are presented in the following forms: UnadjustedCalendar adjustedSeasonally-adjusted Depending on the STS regulation, data are accessible monthly and quarterly. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction Index*Turnover IndexProducer Prices (Domestic Output Prices index)*Import Prices Index*: Total, Euro area market, Non euro area market (euro area countries only)Labour Input Indicators: Number of Persons Employed, Hours Worked, Gross Wages and SalariesCONSTRUCTIONProduction Index*: Total of the construction sector, Building construction, Civil EngineeringLabour input indicators: Number of Persons Employed, Hours Worked, Gross Wages and SalariesConstruction costs IndexBuilding permits indicators*: Number of dwellingsWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (in value)Labour input indicators: Number of Persons EmployedSERVICES  Turnover Index* Producer prices (Ouput prices)*

Eurostat Dataset Id:ei_bsbu_m Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published:as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

Eurostat Dataset Id:ei_bsbu_m_bc Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published:as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

Industry, Trade and Services statistics are part of Short-term statistics (STS), they give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification(Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are presented in the following forms:UnadjustedCalendar adjustedSeasonally-adjusted Depending on the STS regulation, data are accessible monthly and quarterly. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction Index*Turnover IndexProducer Prices (Domestic Output Prices index)*Import Prices Index*: Total, Euro area market, Non euro area market (euro area countries only)Labour Input Indicators: Number of Persons Employed, Hours Worked, Gross Wages and Salaries CONSTRUCTIONProduction Index*: Total of the construction sector, Building construction, Civil EngineeringLabour input indicators: Number of Persons Employed, Hours Worked, Gross Wages and SalariesConstruction costs IndexBuilding permits indicators*: Number of dwellings WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (in value)Labour input indicators: Number of Persons Employed SERVICES Turnover Index*Producer prices (Ouput prices)*

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Data cited at: Consumer price indexes, The International Monetary Fund Consumer price indexes (CPIs) are index numbers that measure changes in the prices of goods and services purchased or otherwise acquired by households, which households use directly, or indirectly, to satisfy their own needs and wants. In practice, most CPIs are calculated as weighted averages of the percentage price changes for a specified set, or ‘‘basket’’, of consumer products, the weights reflecting their relative importance in household consumption in some period. CPIs are widely used to index pensions and social security benefits. CPIs are also used to index other payments, such as interest payments or rents, or the prices of bonds. CPIs are also commonly used as a proxy for the general rate of inflation, even though they measure only consumer inflation. They are used by some governments or central banks to set inflation targets for purposes of monetary policy. The price data collected for CPI purposes can also be used to compile other indices, such as the price indices used to deflate household consumption expenditures in national accounts, or the purchasing power parities used to compare real levels of consumption in different countries.

The FAOSTAT monthly CPI Food CPI database was based on the ILO CPI data until December 2014. In 2014, IMF-ILO-FAO agreed to transfer global CPI data compilation from ILO to IMF. Upon agreement, CPIs for all items and its sub components originates from the International Monetary Fund (IMF), and the UN Statistics Division(UNSD) for countries not covered by the IMF. However, due to a limited time coverage from IMF and UNSD for a number of countries, the Organisation for Economic Co-operation and Development (OECD), the Latin America and the Caribbean statistics (CEPALSTAT), Central Bank of Western African States (BCEAO), Eastern Caribbean Central Bank (ECCB) and national statistical office website data are used for missing historical data from IMF and UNSD food CPI. The FAO CPI dataset for all items(or general CPI) and the Food CPI, consists of a complete and consistent set of time series from January 2000 onwards. These indices measure the price change between the current and reference periods of the average basket of goods and services purchased by households. The CPI,all items is typically used to measure and monitor inflation, set monetary policy targets, index social benefits such as pensions and unemployment benefits, and to escalate thresholds and credits in the income tax systems and wages in public and private wage contracts.

Eurostat Dataset Id:ei_bsco_m Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published:as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

For the countries belonging to the euro area, these are factors for converting euro fixed series (NAC) into euro/ECU series, and vice-versa.

Heating degree day (HDD) is a weather-based technical index designed to describe the need for the heating energy requirements of buildings. Cooling degree day (CDD) is a weather-based technical index designed to describe the need for the cooling (air-conditioning) requirements of buildings. HDD and CDD are derived from meteorological observations of air temperature, interpolated to regular grids at 25 km resolution for Europe. Calculated gridded HDD and CDD are aggregated and subsequently presented on NUTS 2 level. This dataset includes monthly data as published by the Joint Research Centre's AGRI4CAST Resources Portal. Note that Eurostat is not the producer of the monthly data, but is only re-publishing them. Annual data are calculated as sum of monthly data by Eurostat.

Correction coefficients (Extra-EU) are used to ensure equality of purchasing power of remuneration between different locations outside the European Union and Brussels. Correction coefficients are calculated as the ratio between the "economic parity" and the exchange rate to the Euro (where applicable). They operate as a percentage adjustment to remuneration expressed in local currency. As the correction coefficient is simply the economic parity divided by the exchange rate, it can be seen that the exchange rate effect cancels out and the economic parity is the appropriate conversion rate to convert amounts expressed in local currency into Euro and eliminate the effect of price level differences. The economic parity tells us how many currency units a given quantity of goods and services costs in different countries. The method used to establish economic parities is to compare the price of a basket of goods and services purchased by the average international official in Brussels with the price of an equivalent basket of goods and services purchased by the average international official in each of the other duty stations. To compile these prices, Eurostat carry out a number of detailed price surveys in cooperation with the United Nations International Civil Service Commission and the International Section on Remuneration and Prices of the Coordinated Organisations. For each item, the price ratio with Brussels is computed. Similar items are grouped into "basic headings", and a geometric mean of the price ratios is calculated to establish a basic heading parity. These basic heading parities are then aggregated to produce an overall parity. This aggregate is computed as a weighted arithmetic mean, using consumption expenditure pattern of international officials as weights.

Cost of health consulting services, diagnostics services and clinical procedures in major cities/towns and the public and private healthcare services points in each location.

Global growth is forecast at 3.5 percent in 2015 and 3.8 percent in 2016, with uneven prospects across the main countries and regions of the world. The distribution of risks to near-term global growth has become more balanced relative to the October World Economic Outlook but is still tilted to the downside. The decline in oil prices could boost activity more than expected. Geopolitical tensions continue to pose threats, and risks of disruptive shifts in asset prices remain relevant. In some advanced economies, protracted low inflation or deflation also pose risks to activity. The chapter takes a region-by-region look at the recent development in the world economy and the outlook for 2015, with particular attention to notable development in countries within each region.

Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements.Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a geographical region during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services, a component of BoP current account, and data on Foreign Direct Investment, a component of BoP financial account, are used to monitor the external commercial performance of different economies. Outward Foreign Affiliates Statistics (FATS) measure the commercial presence, as defined by the General Agreement on Trade in Services (GATS), through affiliates in foreign markets. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports.  Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU or in millions of national currency. Balance of Payments data coverage varies according to the collection. Some collections refer only to Euro area or EU countries, while some others' coverage includes also EU partner countries.   Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide 2003. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.    More information on BoP is available for each specific collection: Quarterly BoP, ITS, FDI, Outward FATS, BoP of EU Institutions.

Global Surface Summary of the Day is derived from The Integrated Surface Hourly (ISH) dataset. The ISH dataset includes global data obtained from the USAF Climatology Center, located in the Federal Climate Complex with NCDC. The latest daily summary data are normally available 1-2 days after the date-time of the observations used in the daily summaries. Data cited at: https://www.ncei.noaa.gov/data/global-summary-of-the-day/archive/

Euro-zone series: Until December 1998 it is an aggregate of interbank deposit bid rates weighted by country GDP (Gross Domestic Product). Thereafter the rate is the EONIA (Euro OverNight Index Average), the effective overnight reference rate for the euro, computed as a weighted average of all overnight unsecured lending transactions in the interbank market, initiated within the euro area by the contributing panel banks. EONIA is computed with the help of the European Central Bank. EU15 series: Until December 1998, this is a theoretical rate based on an aggregation of day-to-day rates weighted by country GDP. Thereafter the rate is an average of the EONIA and the rates of the non-euro-zone countries, weighted by country GDP. National series: broadly speaking, these are day-to-day interbank rates. Source: European Central Bank.

Data series on decisions on asylum applications and resettlement contain statistical information based on Article 4 of the Council Regulation (EC) no 862/2007 with reference to:First instance decisions by age, sex and citizenshipFinal decisions by age, sex and citizenshipDecisions withdrawing status granted at first instance by type of status withdrawn and by citizenshipDecisions withdrawing status granted as final decisions by type of status withdrawn and by citizenshipResettled persons by age, sex and citizenship These data are supplied to Eurostat by the national Ministries of Interior and related official agencies. Data is presented country by country and for groups of countries: the European Union (EU28 and the European Economic Area (EEA). Data are rounded to the nearest 5.

Data cited at: Direction of Trade Statistics, The International Monetary Fund. The Direction of Trade Statistics (DOTS) presents current figures on the value of merchandise exports and imports dis-aggregated according to a country's primary trading partners. Area and world aggregates are included in the display of trade flows between major areas of the world. Reported data is supplemented by estimates whenever such data is not available or current. Imports are reported on a cost, insurance and freight (CIF) basis and exports are reported on a free on board (FOB) basis, with the exception of a few countries for which imports are also available FOB. Time series data includes estimates derived from reports of partner countries for non-reporting and slow-reporting countries.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. Discouraged job-seekers refer to those persons of working age who during a specified reference period were without work and available for work, but did not look for work in the recent past for specific reasons (for example, believing that there were no jobs available, believing there were none for which they would qualify, or having given up hope of finding employment). For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

Measles cases are defined as laboratory confirmed, epidemiologically linked, and clinical cases as reported to the World Health Organization.

The industrial domestic output price index measures the average price development of all goods and related services resulting from the activity of the industry sector and sold on the domestic market. The domestic output price index shows the monthly development of transaction prices of economic activities. The domestic market is defined as customers resident in the same national territory as the observation unit. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial producer prices are compiled as a "fixed base year Laspeyres type price-index". The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are presented in raw form.

The industrial domestic output price index measures the average price development of all goods and related services resulting from the activity of the industry sector and sold on the domestic market. The domestic output price index shows the monthly development of transaction prices of economic activities. The domestic market is defined as customers resident in the same national territory as the observation unit. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial producer prices are compiled as a "fixed base year Laspeyres type price-index". The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are presented in raw form.

The industrial domestic output price index measures the average price development of all goods and related services resulting from the activity of the industry sector and sold on the domestic market. The domestic output price index shows the monthly development of transaction prices of economic activities. The domestic market is defined as customers resident in the same national territory as the observation unit. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial producer prices are compiled as a "fixed base year Laspeyres type price-index". The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are presented in raw form.

The industrial domestic output price index measures the average price development of all goods and related services resulting from the activity of the industry sector and sold on the domestic market. The domestic output price index shows the monthly development of transaction prices of economic activities. The domestic market is defined as customers resident in the same national territory as the observation unit. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial producer prices are compiled as a "fixed base year Laspeyres type price-index". The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are presented in raw form.

The industrial domestic output price index measures the average price development of all goods and related services resulting from the activity of the industry sector and sold on the domestic market. The domestic output price index shows the monthly development of transaction prices of economic activities. The domestic market is defined as customers resident in the same national territory as the observation unit. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial producer prices are compiled as a "fixed base year Laspeyres type price-index". The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are presented in raw form.

The industrial domestic output price index measures the average price development of all goods and related services resulting from the activity of the industry sector and sold on the domestic market. The domestic output price index shows the monthly development of transaction prices of economic activities. The domestic market is defined as customers resident in the same national territory as the observation unit. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial producer prices are compiled as a "fixed base year Laspeyres type price-index". The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are presented in raw form.

The industrial domestic output price index measures the average price development of all goods and related services resulting from the activity of the industry sector and sold on the domestic market. The domestic output price index shows the monthly development of transaction prices of economic activities. The domestic market is defined as customers resident in the same national territory as the observation unit. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial producer prices are compiled as a "fixed base year Laspeyres type price-index". The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are presented in raw form.

The Economic Sentiment Indicator (ESI) is a composite indicator made up of five sectoral confidence indicators with different weights: Industrial confidence indicator, Services confidence indicator, Consumer confidence indicator, Construction confidence indicator Retail trade confidence indicator. Confidence indicators are arithmetic means of seasonally adjusted balances of answers to a selection of questions closely related to the reference variable they are supposed to track (e.g. industrial production for the industrial confidence indicator). Surveys are defined within the Joint Harmonised EU Programme of Business and Consumer Surveys. The economic sentiment indicator (ESI) is calculated as an index with mean value of 100 and standard deviation of 10 over a fixed standardised sample period. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2). Source: DG ECFIN

The present data collection consists of the following indicators:Interest rates : Day-to-day money market interest rates, 3-month interest rates, Euro yields and Long term government bond yields - Maastricht definitionEuro/Ecu exchange rates: Exchange rates against the ECU/euroEffective exchange rates indices : Nominal Effective Exchange Rate, Real Effective Exchange Rate Â

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. Employees are all those workers who hold paid employment jobs, which are those where the incumbents hold employment contracts which give them a basic remuneration not directly dependent upon the revenue of the unit for which they work. Data disaggregated by economic activity are provided according to the latest version of the International Standard Industrial Classification of All Economic Activities (ISIC) available for that year. Data may have been regrouped from national classifications, which may not be strictly compatible with ISIC. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. Employees are all those workers who hold paid employment jobs, which are those where the incumbents hold employment contracts which give them a basic remuneration not directly dependent upon the revenue of the unit for which they work. Data disaggregated by occupation are provided according to the latest version of the International Standard Classification of Occupations (ISCO). Data may have been regrouped from the national classifications, which may not be strictly compatible with ISCO. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The employed comprise all persons of working age who, during a specified brief period, were in one of the following categories: a) paid employment (whether at work or with a job but not at work); or b) self-employment (whether at work or with an enterprise but not at work). For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The employed comprise all persons of working age who, during a specified brief period, were in one of the following categories: a) paid employment (whether at work or with a job but not at work); or b) self-employment (whether at work or with an enterprise but not at work). Data disaggregated by economic activity are provided according to the latest version of the International Standard Industrial Classification of All Economic Activities (ISIC) available for that year. Data may have been regrouped from national classifications, which may not be strictly compatible with ISIC. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The employed comprise all persons of working age who, during a specified brief period, were in one of the following categories: a) paid employment (whether at work or with a job but not at work); or b) self-employment (whether at work or with an enterprise but not at work). Data disaggregated by occupation are provided according to the latest version of the International Standard Classification of Occupations (ISCO). Data may have been regrouped from the national classifications, which may not be strictly compatible with ISCO. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The employed comprise all persons of working age who, during a specified brief period, were in one of the following categories: a) paid employment (whether at work or with a job but not at work); or b) self-employment (whether at work or with an enterprise but not at work). Data disaggregated by status in employment are provided according to the latest version of the International Standard Classification of Status in Employment (ICSE-93). Data may have been regrouped from the national classifications, which may not be strictly compatible with ICSE. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The employed comprise all persons of working age who, during a specified brief period, were in one of the following categories: a) paid employment (whether at work or with a job but not at work); or b) self-employment (whether at work or with an enterprise but not at work). Data disaggregated by level of education are provided on the highest level of education completed, classified according to the International Standard Classification of Education (ISCED). Data may have been regrouped from national classifications, which may not be strictly compatible with ISCED. For more information, refer to the Education and Mismatch Indicators (EMI) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The employed comprise all persons of working age who, during a specified brief period, were in one of the following categories: a) paid employment (whether at work or with a job but not at work); or b) self-employment (whether at work or with an enterprise but not at work). For more information, refer to the Rural and Urban Labour Market Statistics (RURBAN) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The employed comprise all persons of working age who, during a specified brief period, were in one of the following categories: a) paid employment (whether at work or with a job but not at work); or b) self-employment (whether at work or with an enterprise but not at work). Working time arrangement refers to full-time versus part-time employment. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

The employed comprise all persons of working age who, during a specified brief period, were in the following categories: a) paid employment (whether at work or with a job but not at work); or b) self-employment (whether at work or with an enterprise but not at work). Data are disaggregated by economic activity, which refers to the main activity of the establishment in which a person worked during the reference period. For more information, refer to the concepts and definitions page.

The employed comprise all persons of working age who, during a specified brief period, were in one of the following categories: a) paid employment (whether at work or with a job but not at work); or b) self-employment (whether at work or with an enterprise but not at work). Data are disaggregated by level of education, which refers to the highest levelof education completed, classified according to the International Standard Classification of Education (ISCE). For more information, refer to the concepts and definitions page.

The employed comprise all persons of working age who, during a specified brief period, were in the following categories: a) paid employment (whether at work or with a job but not at work); or b) self-employment (whether at work or with an enterprise but not at work). Data are disaggregated by occupation according to the latest version of the International Standard Classification of Occupations (ISCO). For more information, refer to the concepts and definitions page.

The employed comprise all persons of working age who, during a specified brief period, were in one of the following categories: a) paid employment (whether at work or with a job but not at work); or b) self-employment (whether at work or with an enterprise but not at work). Data are disaggregated by status in employment according to the latest version of the International Standard Classification of Status in Employment (ICSE-93). Status in employment refers to the type of explicit or implicit contract of employment the person has with other persons or organizations. The basic criteria used to define the groups of the classification are the type of economic risk and the type of authority over establishments and other workers which the job incumbents have or will have. For more information, refer to the concepts and definitions page.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The employment-to-population ratio is the number of persons who are employed as a percent of the total of working-age population. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The employment-to-population ratio is the number of persons who are employed as a percent of the total of working-age population. For more information, refer to the Rural and Urban Labour Market Statistics (RURBAN) database description.

Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements. Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics <

Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements. Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics <

 International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, external trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner, - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.

International trade in goods statistics (ITGS) published by Eurostat measure the value and quantity of goods traded between the EU Member States (intra-EU trade) and goods traded by the EU Member States with non-EU countries (extra-EU trade). ‘Goods’ means all movable property including electricity. ‘European’ means that the statistics are compiled on the basis of the concepts and definitions set out in EU legislation. ‘National’ statistics, i.e. statistics published at national level by the Member States, are compiled on the basis of national rules which may differ from EU rules. European ITGS are the official harmonised source of information about exports, imports and the trade balances of the EU, its Member States and the euro area.   Type of users and requirements As international trade forms a major part of the world economy, statistics on trade in goods are an instrument of primary importance for numerous public and private sector decision makers. For example, international trade statistics • enable EU authorities to prepare multilateral and bilateral negotiations under the common commercial policy; • enable EU authorities to evaluate the progress of the Single Market and the integration of EU economies; • enable EU authorities to define and implement anti-dumping policies; • constitute an essential source of information for balance of payments statistics, national accounts and economic studies; and • help EU businesses conduct market research and define their commercial strategy. Statistics satisfy these needs in a variety of ways. Users may need either annual aggregated or detailed monthly data on products or partner countries. They may be interested in trade values in current prices or at constant prices. Alternatively, their interest may be in quantities rather than in values. These examples, which are far from exhaustive, show the diversity of users and their requirements. Eurostat tries to meet these various needs and to adapt to a changing environment, such as changes due to globalisation.   Extrastat and Intrastat: two data collection systems Traditionally ITGS are based on the data collected by customs authorities on trade transactions between countries. Customs declarations are used for statistical purposes as the basic data source which provides detailed information on exports and imports of goods with a geographical breakdown. The first piece of EU legislation on ITGS was adopted in 1975; it provided general guidelines on data collection and obliged Member States to send their data to Eurostat. The advent of the Single Market on 1 January 1993, with its removal of customs formalities between Member States and subsequent loss of trade statistics data sources, required the establishment of a new data collection system: Intrastat.. Since then ITGS are based on two data collection systems: Extrastat and Intrastat. Extrastat data on trade in goods with non-EU countries are collected by customs authorities and are based on the records of trade transactions in customs declarations, whereas Intrastat data are directly collected from intra-EU trade operators once a month. Alternative data sources may be used for some specific goods and movements like for among with ships, aircraft, gas and electricity.   Aggregated versus detailed data International trade in goods statistics are published through different datasets grouped into two categories:Aggregated data which refer to macroeconomic indicators for the EU and euro area. Data are aggregated by broad product categories, both monthly (short-term indicators) and annually (long-term indicators). Broad product categories are defined as one-digit codes of the Standard International Trade Classification (SITC) or aggregates of the Broad Economic Categories (BEC); andDetailed data which refer to the most detailed level of the following product nomenclatures: the Combined Nomenclature (CN), the SITC, the BEC, the Classification of Products by Activity (CPA) and the Standard Goods Classification for Transport Statistics/Revised (NSTR). Detailed data also contain aggregations at higher levels.   Statistical dimensions The frequency at which the data are compiled (data periodicity) and the product nomenclature differ depending on the dataset, but the following statistical fields are always available:reporting country: country or geo-economic area such as EU or euro area;reference period: month and/or year;trade flows: import and export;product according to the relevant classification; andpartner country: EU Member State, non-EU country or geo-economic area. Besides the dimensions listed above, specific datasets contain information on the mode of transport (e.g. by sea, by air or by road) or the statistical procedure (normal trade versus trade for processing activities).

International trade in goods statistics (ITGS) published by Eurostat measure the value and quantity of goods traded between the EU Member States (intra-EU trade) and goods traded by the EU Member States with non-EU countries (extra-EU trade). ‘Goods’ means all movable property including electricity. ‘European’ means that the statistics are compiled on the basis of the concepts and definitions set out in EU legislation. ‘National’ statistics, i.e. statistics published at national level by the Member States, are compiled on the basis of national rules which may differ from EU rules. European ITGS are the official harmonised source of information about exports, imports and the trade balances of the EU, its Member States and the euro area.   Type of users and requirements As international trade forms a major part of the world economy, statistics on trade in goods are an instrument of primary importance for numerous public and private sector decision makers. For example, international trade statistics • enable EU authorities to prepare multilateral and bilateral negotiations under the common commercial policy; • enable EU authorities to evaluate the progress of the Single Market and the integration of EU economies; • enable EU authorities to define and implement anti-dumping policies; • constitute an essential source of information for balance of payments statistics, national accounts and economic studies; and • help EU businesses conduct market research and define their commercial strategy. Statistics satisfy these needs in a variety of ways. Users may need either annual aggregated or detailed monthly data on products or partner countries. They may be interested in trade values in current prices or at constant prices. Alternatively, their interest may be in quantities rather than in values. These examples, which are far from exhaustive, show the diversity of users and their requirements. Eurostat tries to meet these various needs and to adapt to a changing environment, such as changes due to globalisation.   Extrastat and Intrastat: two data collection systems Traditionally ITGS are based on the data collected by customs authorities on trade transactions between countries. Customs declarations are used for statistical purposes as the basic data source which provides detailed information on exports and imports of goods with a geographical breakdown. The first piece of EU legislation on ITGS was adopted in 1975; it provided general guidelines on data collection and obliged Member States to send their data to Eurostat. The advent of the Single Market on 1 January 1993, with its removal of customs formalities between Member States and subsequent loss of trade statistics data sources, required the establishment of a new data collection system: Intrastat.. Since then ITGS are based on two data collection systems: Extrastat and Intrastat. Extrastat data on trade in goods with non-EU countries are collected by customs authorities and are based on the records of trade transactions in customs declarations, whereas Intrastat data are directly collected from intra-EU trade operators once a month. Alternative data sources may be used for some specific goods and movements like for among with ships, aircraft, gas and electricity.   Aggregated versus detailed data International trade in goods statistics are published through different datasets grouped into two categories:Aggregated data which refer to macroeconomic indicators for the EU and euro area. Data are aggregated by broad product categories, both monthly (short-term indicators) and annually (long-term indicators). Broad product categories are defined as one-digit codes of the Standard International Trade Classification (SITC) or aggregates of the Broad Economic Categories (BEC); andDetailed data which refer to the most detailed level of the following product nomenclatures: the Combined Nomenclature (CN), the SITC, the BEC, the Classification of Products by Activity (CPA) and the Standard Goods Classification for Transport Statistics/Revised (NSTR). Detailed data also contain aggregations at higher levels.   Statistical dimensions The frequency at which the data are compiled (data periodicity) and the product nomenclature differ depending on the dataset, but the following statistical fields are always available:reporting country: country or geo-economic area such as EU or euro area;reference period: month and/or year;trade flows: import and export;product according to the relevant classification; andpartner country: EU Member State, non-EU country or geo-economic area. Besides the dimensions listed above, specific datasets contain information on the mode of transport (e.g. by sea, by air or by road) or the statistical procedure (normal trade versus trade for processing activities).

International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.

International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.

International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, external trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner, - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.

International trade in goods statistics (ITGS) published by Eurostat measure the value and quantity of goods traded between the EU Member States (intra-EU trade) and goods traded by the EU Member States with non-EU countries (extra-EU trade). ‘Goods’ means all movable property including electricity. ‘European’ means that the statistics are compiled on the basis of the concepts and definitions set out in EU legislation. ‘National’ statistics, i.e. statistics published at national level by the Member States, are compiled on the basis of national rules which may differ from EU rules. European ITGS are the official harmonised source of information about exports, imports and the trade balances of the EU, its Member States and the euro area.   Type of users and requirements As international trade forms a major part of the world economy, statistics on trade in goods are an instrument of primary importance for numerous public and private sector decision makers. For example, international trade statistics • enable EU authorities to prepare multilateral and bilateral negotiations under the common commercial policy; • enable EU authorities to evaluate the progress of the Single Market and the integration of EU economies; • enable EU authorities to define and implement anti-dumping policies; • constitute an essential source of information for balance of payments statistics, national accounts and economic studies; and • help EU businesses conduct market research and define their commercial strategy. Statistics satisfy these needs in a variety of ways. Users may need either annual aggregated or detailed monthly data on products or partner countries. They may be interested in trade values in current prices or at constant prices. Alternatively, their interest may be in quantities rather than in values. These examples, which are far from exhaustive, show the diversity of users and their requirements. Eurostat tries to meet these various needs and to adapt to a changing environment, such as changes due to globalisation.   Extrastat and Intrastat: two data collection systems Traditionally ITGS are based on the data collected by customs authorities on trade transactions between countries. Customs declarations are used for statistical purposes as the basic data source which provides detailed information on exports and imports of goods with a geographical breakdown. The first piece of EU legislation on ITGS was adopted in 1975; it provided general guidelines on data collection and obliged Member States to send their data to Eurostat. The advent of the Single Market on 1 January 1993, with its removal of customs formalities between Member States and subsequent loss of trade statistics data sources, required the establishment of a new data collection system: Intrastat.. Since then ITGS are based on two data collection systems: Extrastat and Intrastat. Extrastat data on trade in goods with non-EU countries are collected by customs authorities and are based on the records of trade transactions in customs declarations, whereas Intrastat data are directly collected from intra-EU trade operators once a month. Alternative data sources may be used for some specific goods and movements like for among with ships, aircraft, gas and electricity.   Aggregated versus detailed data International trade in goods statistics are published through different datasets grouped into two categories:Aggregated data which refer to macroeconomic indicators for the EU and euro area. Data are aggregated by broad product categories, both monthly (short-term indicators) and annually (long-term indicators). Broad product categories are defined as one-digit codes of the Standard International Trade Classification (SITC) or aggregates of the Broad Economic Categories (BEC); andDetailed data which refer to the most detailed level of the following product nomenclatures: the Combined Nomenclature (CN), the SITC, the BEC, the Classification of Products by Activity (CPA) and the Standard Goods Classification for Transport Statistics/Revised (NSTR). Detailed data also contain aggregations at higher levels.   Statistical dimensions The frequency at which the data are compiled (data periodicity) and the product nomenclature differ depending on the dataset, but the following statistical fields are always available:reporting country: country or geo-economic area such as EU or euro area;reference period: month and/or year;trade flows: import and export;product according to the relevant classification; andpartner country: EU Member State, non-EU country or geo-economic area. Besides the dimensions listed above, specific datasets contain information on the mode of transport (e.g. by sea, by air or by road) or the statistical procedure (normal trade versus trade for processing activities).

International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.

 International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, external trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner, - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.

International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, external trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner, - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services (ITS), a component of BoP current account, are used, alongside with data on Foreign Direct Investment (a component of BoP financial account), to monitor the external commercial performance of different economies. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports. Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU and in millions of national currency. Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.

International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.

International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term "exports" for all outward flows and "imports" for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat's classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.

International trade in goods statistics (ITGS) published by Eurostat measure the value and quantity of goods traded between the EU Member States (intra-EU trade) and goods traded by the EU Member States with non-EU countries (extra-EU trade). ‘Goods’ means all movable property including electricity. ‘European’ means that the statistics are compiled on the basis of the concepts and definitions set out in EU legislation. ‘National’ statistics, i.e. statistics published at national level by the Member States, are compiled on the basis of national rules which may differ from EU rules. European ITGS are the official harmonised source of information about exports, imports and the trade balances of the EU, its Member States and the euro area.   Type of users and requirements As international trade forms a major part of the world economy, statistics on trade in goods are an instrument of primary importance for numerous public and private sector decision makers. For example, international trade statistics • enable EU authorities to prepare multilateral and bilateral negotiations under the common commercial policy; • enable EU authorities to evaluate the progress of the Single Market and the integration of EU economies; • enable EU authorities to define and implement anti-dumping policies; • constitute an essential source of information for balance of payments statistics, national accounts and economic studies; and • help EU businesses conduct market research and define their commercial strategy. Statistics satisfy these needs in a variety of ways. Users may need either annual aggregated or detailed monthly data on products or partner countries. They may be interested in trade values in current prices or at constant prices. Alternatively, their interest may be in quantities rather than in values. These examples, which are far from exhaustive, show the diversity of users and their requirements. Eurostat tries to meet these various needs and to adapt to a changing environment, such as changes due to globalisation.   Extrastat and Intrastat: two data collection systems Traditionally ITGS are based on the data collected by customs authorities on trade transactions between countries. Customs declarations are used for statistical purposes as the basic data source which provides detailed information on exports and imports of goods with a geographical breakdown. The first piece of EU legislation on ITGS was adopted in 1975; it provided general guidelines on data collection and obliged Member States to send their data to Eurostat. The advent of the Single Market on 1 January 1993, with its removal of customs formalities between Member States and subsequent loss of trade statistics data sources, required the establishment of a new data collection system: Intrastat.. Since then ITGS are based on two data collection systems: Extrastat and Intrastat. Extrastat data on trade in goods with non-EU countries are collected by customs authorities and are based on the records of trade transactions in customs declarations, whereas Intrastat data are directly collected from intra-EU trade operators once a month. Alternative data sources may be used for some specific goods and movements like for among with ships, aircraft, gas and electricity.   Aggregated versus detailed data International trade in goods statistics are published through different datasets grouped into two categories:Aggregated data which refer to macroeconomic indicators for the EU and euro area. Data are aggregated by broad product categories, both monthly (short-term indicators) and annually (long-term indicators). Broad product categories are defined as one-digit codes of the Standard International Trade Classification (SITC) or aggregates of the Broad Economic Categories (BEC); andDetailed data which refer to the most detailed level of the following product nomenclatures: the Combined Nomenclature (CN), the SITC, the BEC, the Classification of Products by Activity (CPA) and the Standard Goods Classification for Transport Statistics/Revised (NSTR). Detailed data also contain aggregations at higher levels.   Statistical dimensions The frequency at which the data are compiled (data periodicity) and the product nomenclature differ depending on the dataset, but the following statistical fields are always available:reporting country: country or geo-economic area such as EU or euro area;reference period: month and/or year;trade flows: import and export;product according to the relevant classification; andpartner country: EU Member State, non-EU country or geo-economic area. Besides the dimensions listed above, specific datasets contain information on the mode of transport (e.g. by sea, by air or by road) or the statistical procedure (normal trade versus trade for processing activities).

International trade in goods statistics (ITGS) published by Eurostat measure the value and quantity of goods traded between the EU Member States (intra-EU trade) and goods traded by the EU Member States with non-EU countries (extra-EU trade). ‘Goods’ means all movable property including electricity. ‘European’ means that the statistics are compiled on the basis of the concepts and definitions set out in EU legislation. ‘National’ statistics, i.e. statistics published at national level by the Member States, are compiled on the basis of national rules which may differ from EU rules. European ITGS are the official harmonised source of information about exports, imports and the trade balances of the EU, its Member States and the euro area.   Aggregated versus detailed data International trade in goods statistics are published through different datasets grouped into two categories:Aggregated data refer to macroeconomic indicators for the EU and euro area. Monthly (short-term indicators) and annual (long-term indicators) data are aggregated by broad product categories. Broad product categories are defined as one-digit codes of the Standard International Trade Classification (SITC) or aggregates of the Broad Economic Categories (BEC).Detailed data refer to the most detailed level of the following product nomenclatures: the Combined Nomenclature (CN), the SITC, the BEC, the Classification of Products by Activity (CPA) and the Standard Goods Classification for Transport Statistics/Revised (NSTR). Detailed data also contain product aggregations at higher levels.   Statistical dimensions Data periodicity (monthly or yearly) and product nomenclature (CN, SITC, BEC or CPA) differ depending on the dataset, but the following statistical fields are always available:reporting country: country or geo-economic area such as EU or euro area;partner country: EU Member State, non-EU country or geo-economic area.reference period: month and/or year;trade flows: import and export; andproduct according to the relevant classification. Besides the dimensions listed above, specific datasets contain information on the mode of transport (e.g. by sea, by air or by road) or the statistical procedure (normal trade versus trade for processing activities).

A yield curve (which is known as the term structure of interest rates) represents the relationship between market remuneration (interest) rates and the remaining time to maturity of debt securities. The zero coupon yield curves and their corresponding time series are calculated using "AAA-rated" euro area central government bonds, i.e. debt securities with the most favourable credit risk assessment. They represent the yields to maturity of hypothetical zero coupon bonds. Source: European Central Bank.

A yield curve, also known as term structure of interest rates, represents the relationship between market remuneration (interest) rates and the remaining time to maturity of debt securities. The information content of a yield curve reflects the asset pricing process on financial markets. When buying and selling bonds, investors include their expectations of  future inflation, real interest rates and their assessment of risks. An investor calculates the price of a bond by discounting the expected future cash flows (coupon payments and/or redemption). ECB estimates zero-coupon yield curves for the euro area and also derives forward and par yield curves. A zero coupon bond is a bond that pays no cupon and is sold at a discount from its face value. The zero coupon curve represents the yield to maturity of hypothetical zero coupon bonds, since they are not directly observable in the market for a wide range of maturities. They must therfore be estimatedfrom existing zero coupon bonds and fixed coupon bond prices or yields.  The forward curve shows the short-term (instantaneous) interest rate for future periods implied in the yield curve. The par yield reflects hypothetical yields, namely the interest rates the bonds would have yielded had they been priced at par (i.e. at 100).

The Balance of Payments (BOP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of an economic area during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, primary and secondary income), as well as on transactions which fall in the capital and the financial account. International investment position presents value of financial assets owned outside the economy and indebtedness of the economy to the rest of the world. BOP is an important macro-economic indicator used to assess the position of an economy (of credit or debit for current and capital acount, net acquisition of financial assets or net incurrence of liabilities for BOP financial account and international investment position) towards the external world. Out of BOP data, some indicators on international position of the EU and Member States are derived. Indicators on Main Balance of Payments and International Investment Position items as share of GDP are presented as percentage of GDP for given year or quarter and moving average for 3 consecutive years for: balance, credit and debit flows of current and capital accounts and of main current account  items: goods, services, primary and secondary income,net flows, net acquisition of financial assets and net incurrence of liabilities for total financial account and foreign direct investment, international investment position and net external debt at the end of reference quarter or year. Indicators on export market shares present shares of each EU Member State in total world exports of goods and services for given year, and 1-year and 5-year percentage changes of these shares, as well as shares in OECD exports and 5-year percentage changes of these shares.

Eurostat Dataset Id:ei_bsci_m_r2 Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published: as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

Eurostat Dataset Id:med_ec9 The focus of this domain is on the following countries:Algeria, Egypt, Israel, Jordan, Lebanon, Morocco, Palestinian Authority, Syria, Tunisia. Data are provided for over 1000 indicators depending on the country.   The data for the Mediterranean partner countries are supplied by and under the responsibility of the national statistical authorities  of each of the countries or territories. The data and their denomination in no way constitute the  expression of an opinion by the European Commission on the  legal status of a country or territory or on the delimitation of its frontiers. Â

Recent exchange rate movements have been unusually large, triggering a debate regarding their likely effects on trade. Historical experience in advanced and emerging market and developing economies suggests that exchange rate movements typically have sizable effects on export and import volumes. A 10 percent real effective depreciation in an economy’s currency is associated with a rise in real net exports of, on average, 1.5 percent of GDP, with substantial cross-country variation around this average. Although these effects fully materialize over a number of years, much of the adjustment occurs in the first year. The boost to exports associated with currency depreciation is found to be largest in countries with initial economic slack and with domestic financial systems that are operating normally. Some evidence suggests that the rise of global value chains has weakened the relationship between exchange rates and trade in intermediate products used as inputs into other economies’ exports. However, the bulk of global trade still consists of conventional trade, and there is little evidence of a general trend toward disconnect between exchange rates and total exports and imports.

Imports are recorded by country of origin, exports by country of destination; quantities are regarded as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.  The concept of the physical movement of flows applies. The monthly imports and exports data collections cover following energy commodities:solid  fuels (hard coal only)oil and petroleum productsgaselectricity      For solid fuels, crude oil and NGLs, imports and exports are reported by country of ultimate origin, respectively destination, while natural gas, refinery products and feedstocks as well as electricity are reported as coming from the country of last consignment. Quantities of crude oil and petroleum products imported or exported under processing agreements (i.e. refining on account) should be included. However, transit trade, international marine and aviation bunkers are excluded from this data set. Please note that this is different from the definition of natural gas trade in the annual gas questionnaire and from the definition in the previous monthly oil and gas questionnaire (before January 2013). For further information, please consult the Energy Statistics Regulation (Regulation (EC) 1099/2008 on energy statistics) and the reporting instructions. Monthly imports and exports of energy commodities cover the full spectrum of the 28 Member States of the European Union, EFTA States, candidate countries and potential candidates. Â

Imports are recorded by country of origin, exports by country of destination; quantities are regarded as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.  The concept of the physical movement of flows applies. The monthly imports and exports data collections cover following energy commodities: solid  fuels (hard coal only)oil and petroleum productsgaselectricity      For solid fuels, crude oil and NGLs, imports and exports are reported by country of ultimate origin, respectively destination, while natural gas, refinery products and feedstocks as well as electricity are reported as coming from the country of last consignment. Quantities of crude oil and petroleum products imported or exported under processing agreements (i.e. refining on account) should be included. However, transit trade, international marine and aviation bunkers are excluded from this data set. Please note that this is different from the definition of natural gas trade in the annual gas questionnaire and from the definition in the previous monthly oil and gas questionnaire (before January 2013). For further information, please consult the Energy Statistics Regulation (Regulation (EC) 1099/2008 on energy statistics) and the reporting instructions. Monthly imports and exports of energy commodities cover the full spectrum of the 28 Member States of the European Union, EFTA States, candidate countries and potential candidates. Â

Imports are recorded by country of origin, exports by country of destination; quantities are regarded as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.  The concept of the physical movement of flows applies. The monthly imports and exports data collections cover following energy commodities:solid  fuels (hard coal only)oil and petroleum productsgaselectricity      For solid fuels, crude oil and NGLs, imports and exports are reported by country of ultimate origin, respectively destination, while natural gas, refinery products and feedstocks as well as electricity are reported as coming from the country of last consignment. Quantities of crude oil and petroleum products imported or exported under processing agreements (i.e. refining on account) should be included. However, transit trade, international marine and aviation bunkers are excluded from this data set. Please note that this is different from the definition of natural gas trade in the annual gas questionnaire and from the definition in the previous monthly oil and gas questionnaire (before January 2013). For further information, please consult the Energy Statistics Regulation (Regulation (EC) 1099/2008 on energy statistics) and the reporting instructions. Monthly imports and exports of energy commodities cover the full spectrum of the 28 Member States of the European Union, EFTA States, candidate countries and potential candidates. Â

Imports are recorded by country of origin, exports by country of destination; quantities are regarded as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.  The concept of the physical movement of flows applies. The monthly imports and exports data collections cover following energy commodities:solid  fuels (hard coal only)oil and petroleum productsgaselectricity      For solid fuels, crude oil and NGLs, imports and exports are reported by country of ultimate origin, respectively destination, while natural gas, refinery products and feedstocks as well as electricity are reported as coming from the country of last consignment. Quantities of crude oil and petroleum products imported or exported under processing agreements (i.e. refining on account) should be included. However, transit trade, international marine and aviation bunkers are excluded from this data set. Please note that this is different from the definition of natural gas trade in the annual gas questionnaire and from the definition in the previous monthly oil and gas questionnaire (before January 2013). For further information, please consult the Energy Statistics Regulation (Regulation (EC) 1099/2008 on energy statistics) and the reporting instructions. Monthly imports and exports of energy commodities cover the full spectrum of the 28 Member States of the European Union, EFTA States, candidate countries and potential candidates. Â

Exports by Country for Senegal

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the reporting country and the rest of the world. Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The table indicates the seasonally adjusted values of the EU and euro-zone exports. Exports are valuated FOB (Free on Board), i.e. only incidental expenses (freight, insurance) incurred in the part of journey located on the territory of the reporting country are included. The raw values of the Member States are adjusted according to the number of working days on the basis of each national calendar and then seasonally adjusted before being aggregated to provide the EU and euro-zone totals.

If a search in the StatBank does not return any result, this does not necessarily mean that there is no trade or that the country code is not valid in the particular period. A zero (0) could also imply that the figures are confidential or that the value is less than half of the unit used. From 2006 on the following countries had their belonging to continent changed - Cyprus from Asia to Europe, and Armenia, Georgia, Kyrgyzstan, Kazakhstan, Tajikistan, Turkmenistan and Uzbekistan from Europe to Asia. The total for Trade are/continent includes this change - while in the selections of countries in the pull-down menu for European/Asian countries it is the present classification that will be shown for the whole time period (Cypros belonging to Europe and the other countries to Asia). Statistics Norway do not publish figures for the trade region previously Comecon after 2011. For more information, see About the statisticsMonthly figures are released on the 15th of the month after the observation period (the previous month), or the first subsequent working day. These figures are preliminary. Corresponding yearly figures are published together with the monthly figures for December. With regard to the current year, all the monthly figures are updated in every publication. Final figures for the preceding year are released twice. For the first time in May the following year, while the corrected final figures are published in May one year later.countryEUCroatia is included in the trade with the EU from 2014 on.Palestine (2013-)Previously: West Bank/Gaza Stripe (2001-2012)

Methodological explanationsSymbols usedSource: State Statistical Office, Year 2018M12, preliminary data

Methodological explanationsSymbols usedSource: State Statistical OfficeYear2018preliminary data

Monthly updates of FIFA World Football Men's Ranking 

The Balance of Payments (BoP) systematically summarizes all economic transactions between the residents and the non-residents of a country or of a geographical region during a given period. The Balance of payments provides harmonized information on international transactions which are part of the current account (goods, services, income, current transfers), but also on transactions which fall in the capital and the financial account. BoP is an important macro-economic indicator used to assess the position of an economy (of credit or debit) towards the external world. Data on International Trade in Services, a component of BoP current account, and data on Foreign Direct Investment, a component of BoP financial account, are used to monitor the external commercial performance of different economies. Outward Foreign Affiliates Statistics (FATS) measure the commercial presence, as defined by the General Agreement on Trade in Services (GATS), through affiliates in foreign markets. Balance of Payments data are used for calculation of indicators needed for monitoring of macroenomic imbalances such as share of main BoP and International Investment Position (IIP) items in GDP and export market shares calculated as the EU Member States' shares in total world exports.  Out of BoP data, some indicators of EU market integration are also derived. Data are in millions of Euro/ECU or in millions of national currency. Balance of Payments data coverage varies according to the collection. Some collections refer only to Euro area or EU countries, while some others' coverage includes also EU partner countries.   Several statistical adjustments are applied to the original data provided by the Member States. These are described in the International Trade in Services EU 1992-2001 - Compilation guide 2003. The International Monetary Fund Balance of Payments Manual (BPM5) classification is used for the compilation of the BoP. The BoP data are collected through national surveys and administrative sources.    More information on BoP is available for each specific collection: Quarterly BoP, ITS, FDI, Outward FATS, BoP of EU Institutions.

Eurostat Dataset Id:ei_bsfs_m Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published: as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

The Harmonised Index of Consumer Prices (HICP) gives comparable measures of inflation for the countries and country groups for which it is produced. It is an economic indicator that measures the change over time of the prices of consumer goods and services acquired by households. In other words, it is a set of consumer price indices (CPI) calculated according to a harmonised approach and a set of definitions as laid down in Regulations and recommendations. In addition, the HICP provides the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. The HICP is available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the euro area, the European Union (EU), and the European Economic Area (EEA), which, in addition to the EU, also covers Iceland and Norway, but not Liechtenstein. The official country-group aggregates reflect the changing country composition of the EA, the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. For analytical purposes Eurostat also computes country-group aggregates with stable country composition over time. For example, the EU28 aggregate shows price indices covering all current 28 Member States since 1997. The HICP for Serbia and Turkey (candidate countries) are also published. That data are flagged 'd' ('definition differs'). A proxy-HICP for the all-items and main aggregates is available for the USA. National HICPs are produced by National Statistical Institutes (NSIs), while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database include price indices and rates of change (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around four hundred sub-indices for different goods and services and over thirty special aggregates are available, including the HICP at administered prices (HICP-AP). Once a year, with the release of the January data, the relative weights for the indices and the special aggregates, are published for the individual countries and for the European aggregates. The composition of the HICP-AP aggregates, i.e. which sub-indices are classified as mainly or fully administered by each Member State, is also updated at the same time. Eurostat publishes early estimates, called 'HICP flash estimates', of the euro area overall inflation rate and selected components. They are published monthly, usually on the last working day of the reference month, and disseminated in a news release, in the database and in a Statistics Explained article. The HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes, such as VAT and excise duties, on the overall inflation (more information). Flags Flags provide information about the 'status' of the data or a specific data value. The following flags are used for the HICP data in the Eurostat online database: p = provisional data: Data is flagged as provisional by the National Statistical Institutes to signal that data are still being treated or validated. The 'p' flag remains attached to the HICP data values in question for one month only. r = revised data. In the case when the most recent figures published differ from previously disseminated data, they are flagged with 'r'. Countries are allowed to revise their HICP figures at any point and, therefore, revised figures may appear in historic data. The 'r' flag remains attached to the HICP data values in question for one month only. e = estimated data. All the figures of the HICP flash estimate are marked with the 'e' flag. d = definition differs, meaning that the national definition of a series differs from the ECOICOP (European Classification of Individual Consumption according to Purpose) definition. It is also used for data values from countries for which conformity with the requirements of the HICP methodology has not yet been evaluated by Eurostat, including candidate countries, pre-candidate countries, new EU Member States and the United States of America. u = unreliable data. Data is flagged as unreliable by the National Statistical Institutes.

Data series on asylum applications contain statistical information based on Article 4 of the Council Regulation (EC) No 862/2007 with reference to:Asylum and first time asylum applicants by age, sex and citizenshipPersons subject to applications pending at the end of reference period by age, sex and citizenshipApplications for asylum withdrawn by age, sex and citizenshipAsylum applicants considered to be unaccompanied minors by age, sex and citizenship These data are supplied to Eurostat by the national Ministries of Interior and related official agencies. Data is presented by country and for groups of countries: the European Union (EU28, EU27) and the European Free Trade Association (EFTA). Data has been rounded to the nearest 5.

Data for broadband (except for broadband coverage), mobile telephony and financial indicators have been collected by the European Commission (DG CNECT) from responsible national authorities (national regulatory authorities or ministries). Questionnaires are sent annually or bi-annually (broadband data). The source for fixed telephony data is the International Telecommunication Union (ITU). Data are collected annually. There is no fixed release calendar. Data are usually released annually. The collection of 'Telecommunication Services' statistics presents the following main categories of characteristics: Fixed broadbandcoveragesubscriptions and penetrationsubscriptions by speedmarket share   Mobile broadbandcoveragesubscriptions  (not available until reference year 2013) and penetrationmarket share  (not available until reference year 2013)   Fixed telephonymain telephone lines   Mobile communicationssubscriptions and penetrationmarket sharerevenues   Telecommunications sectorrevenuesinvestments

Data for broadband (except for broadband coverage), mobile telephony and financial indicators have been collected by the European Commission (DG CNECT) from responsible national authorities (national regulatory authorities or ministries). Questionnaires are sent annually or bi-annually (broadband data). The source for fixed telephony data is the International Telecommunication Union (ITU). Data are collected annually. There is no fixed release calendar. Data are usually released annually. The collection of 'Telecommunication Services' statistics presents the following main categories of characteristics: Fixed broadbandcoveragesubscriptions and penetrationsubscriptions by speedmarket share   Mobile broadbandcoveragesubscriptions  (not available until reference year 2013) and penetrationmarket share  (not available until reference year 2013)   Fixed telephonymain telephone lines   Mobile communicationssubscriptions and penetrationmarket sharerevenues   Telecommunications sectorrevenuesinvestments

Data for broadband (except for broadband coverage), mobile telephony and financial indicators have been collected by the European Commission (DG CNECT) from responsible national authorities (national regulatory authorities or ministries). Questionnaires are sent annually or bi-annually (broadband data). The source for fixed telephony data is the International Telecommunication Union (ITU). Data are collected annually. There is no fixed release calendar. Data are usually released annually. The collection of 'Telecommunication Services' statistics presents the following main categories of characteristics: Fixed broadbandcoveragesubscriptions and penetrationsubscriptions by speedmarket share   Mobile broadbandcoveragesubscriptions  (not available until reference year 2013) and penetrationmarket share  (not available until reference year 2013)   Fixed telephonymain telephone lines   Mobile communicationssubscriptions and penetrationmarket sharerevenues   Telecommunications sectorrevenuesinvestments

The Food Price Monitoring Tool intends to analyse the available data on price developments through the supply chain. The supply chain is a series of economic activities that are performed by different economic actors that contribute to the production and distribution of one consumer product or a group of consumer products. The Food Price Monitoring Tool monitors 15 supply chains. It compares the price indices of four stages of the supply chain:Retail sector: the harmonised index of consumer prices (HICP)Domestic food industry: the domestic producer price index (PPId)Imported products: the import price index based on unit values from international trade in goods statisticsAgricultural commodities: the agricultural commodity prices index (ACP)

The Community concept applies for all cross-border movements of goods, including purchases (imports) and sales (re-exports) in Belgium between non-resident businesses.

The national concept refers solely to cross-border movements of goods involving a resident business as counter party.

The dataset provided by the iGA via http://www.data.gov.bh and terms of use available at http://www.data.gov.bh/en/TermsOfUse . To the full extent permitted by law the iGA is not liable for any damage or loss of any kind caused directly or indirectly by the use of the datasets or any derived analyzes or application

Data cited at: https://data.gov.om/OMFRTRD2016 this Data set covers the statistical indicators illustrating the development of trade between Oman and other countries, and classification of  merchandise exports, re-exports and merchandise imports by commodity group, nature of materials, their final utilization and port of entry.  It includes also a table on of the balance of payments estimates.   The commodity classification used in the presentation of foreign trade data is the Hormonised System, which has been adopted in Oman since 1987, in addition to the SITC Revision (4) for international comparison.  Commodity values are estimated in Rial Omani on the basis of the (C.I.F.) value for imports (i.e. the cost, insurance and freight of goods to the custom points in Oman) and (F.O.B.) for exports and re-exports.

International Trade in Commodities in UAE

The Air transport domain contains national and international intra and extra-EU data. This provides air transport data for passengers (in number of passengers) and for freight and mail (in 1 000 tonnes) as well as air traffic data by airports, airlines and aircraft. Data are transmitted to Eurostat by the Member States of the European Union as well as the Candidate Countries, Iceland, Norway and Switzerland. The air transport data have been calculated using data collected at airport level. The data are presented in four sub-domains: Air Transport measurement - PassengersAir Transport measurement - Freight and mailAir Transport measurement - Traffic data by airports, aircraft and airlinesAir Transport measurement - Data aggregated at standard regional levels (NUTS). The two first domains contain several data collections: Overview of the air transport by country and airport,National air transport by country and airport,International intra-EU air transport by country and airport,International extra-EU air transport by country and airport,Detailed air transport by reporting country and routes. In the tables of the sub-domain "Transport measurement - Passengers", data are broken down by passengers on board (arrivals, departures and total), passengers carried (arrivals, departures and total) and passenger commercial air flights (arrival, departures and total). Additionally, the tables of collection "Detailed air transport by reporting country and routes" provide data on seats available (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Freight and mail", data are broken down by freight and mail on board (arrival, departures and total), freight and mail loaded/unloaded (loaded, unloaded and total) and all-freight and mail commercial air flights (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Traffic by airports, aircraft and airlines": - Data by type of aircraft are broken down by total passengers on board, total freight and mail on board in tonnes, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by type of airline are broken down by total passengers on board, total passengers carried, total freight and mail on board, total freight and mail loaded/unloaded, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by airport are broken down by total passengers carried, total transit passengers, total freight and mail loaded/unloaded, total commercial aircraft movements, total aircraft movements. The data is presented at monthly, quarterly and annual level. The sub-domain "Transport measurement - Data aggregated at standard regional levels (NUTS)", contains two tables: Air transport of passengers at regional levelAir transport of freight at regional level The tables present the evolution of the number of passengers carried (if not available passengers on board) and the volume of freight and mail loaded or unloaded (if not available freight and mail on board) to/from the NUTS regions (level 2, 1 and 0) since 1999. The data is presented at annual level. The air transport regional data have been calculated using data collected at the airport level in the frame of the regulatory data collection on air transport. More information can be found in Regional transport statistics metadata file.

The Air transport domain contains national and international intra and extra-EU data. This provides air transport data for passengers (in number of passengers) and for freight and mail (in 1 000 tonnes) as well as air traffic data by airports, airlines and aircraft. Data are transmitted to Eurostat by the Member States of the European Union as well as the Candidate Countries, Iceland, Norway and Switzerland. The air transport data have been calculated using data collected at airport level. The data are presented in four sub-domains: Air Transport measurement - PassengersAir Transport measurement - Freight and mailAir Transport measurement - Traffic data by airports, aircraft and airlinesAir Transport measurement - Data aggregated at standard regional levels (NUTS). The two first domains contain several data collections: Overview of the air transport by country and airport,National air transport by country and airport,International intra-EU air transport by country and airport,International extra-EU air transport by country and airport,Detailed air transport by reporting country and routes. In the tables of the sub-domain "Transport measurement - Passengers", data are broken down by passengers on board (arrivals, departures and total), passengers carried (arrivals, departures and total) and passenger commercial air flights (arrival, departures and total). Additionally, the tables of collection "Detailed air transport by reporting country and routes" provide data on seats available (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Freight and mail", data are broken down by freight and mail on board (arrival, departures and total), freight and mail loaded/unloaded (loaded, unloaded and total) and all-freight and mail commercial air flights (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Traffic by airports, aircraft and airlines": - Data by type of aircraft are broken down by total passengers on board, total freight and mail on board in tonnes, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by type of airline are broken down by total passengers on board, total passengers carried, total freight and mail on board, total freight and mail loaded/unloaded, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by airport are  broken down by total passengers carried, total transit passengers, total transfer passengers, total freight and mail loaded/unloaded, total commercial aircraft movements, total aircrafts movements. the data is presented at monthly, quarterly and annual level. The sub-domain "Transport measurement - Data aggregated at standard regional levels (NUTS)", contains two tables: Air transport of passengers at regional levelAir transport of freight at regional level The tables present the evolution of the number of passengers carried (if not available passengers on board) and the volume of freight and mail loaded or unloaded (if not available freight and mail on board) to/from the NUTS regions (level 2, 1 and 0) since 1999. The data is presented at annual level. The air transport regional data have been calculated using data collected at the airport level in the frame of the regulatory data collection on air transport. More information can be found in Regional transport statistics metadata file.

Consumer price indices (CPIs) measure inflation as price changes of a representative basket of goods and services typically purchased by households. The G20 CPI aggregate reflects national CPIs for all G20 countries (with the exception of Turkey) that are not part of the European Union (EU) while it reflects the Harmonised Indices of Consumer Prices (HICP) for the EU, its Member States and for Turkey. It is an annual chain-linked Laspeyres-type index. The weights for each country in each link are based on the previous year’s relative share of individual final consumption expenditure of households and non-profit institutions serving households expressed in Purchasing Power Parities (PPPs). The table presents the data for all non-EU countries. The HICP tables for France, Germany, Italy, the United Kingdom, and the euro area and European Union can be found under the HICP tables.

Data cited at: Global Database of Events, Language, and Tone   The GDELT Event Database records over 300 categories of physical activities around the world, from riots and protests to peace appeals and diplomatic exchanges, georeferenced to the city or mountain top, across the entire planet dating back to January 1, 1979 and updated every 15 minutes. Essentially it takes a sentence like "The United States criticized Russia yesterday for deploying its troops in Crimea, in which a recent clash with its soldiers left 10 civilians injured" and transforms this blurb of unstructured text into three structured database entries, recording US CRITICIZES RUSSIA, RUSSIA TROOP-DEPLOY UKRAINE (CRIMEA), and RUSSIA MATERIAL-CONFLICT CIVILIANS (CRIMEA). Nearly 60 attributes are captured for each event, including the approximate location of the action and those involved. This translates the textual descriptions of world events captured in the news media into codified entries in a grand "global spreadsheet."

Data cited at: Global Petrol Prices web site - https://www.globalpetrolprices.com/ License: https://creativecommons.org/licenses/by-nc/4.0/ Data is getting collected Every Tuesday evening from the Global Petrol Prices website. Weekly Average data is available from 28-Dec-2015 onward. Monthly average price is available for the period of January, 2013 - July, 2013    

10-year government bond yields are reference rates, based on government bonds with a maturity close to 10 years.

Harmonised Indices of Consumer Prices (HICP) give comparable measures of inflation for the countries and country groups for which they are produced. They are economic indicators that measure the change over time of the prices of consumer goods and services acquired by households. In other words, they are a set of consumer price indices (CPI) calculated according to a harmonised approach and a single set of definitions. In particular, HICP provide the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. HICP are available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the Monetary Union Index of Consumer Prices (MUICP or EA) covering the euro area countries, the European index of consumer prices (EICP or EU) including all Member States, and the European Economic Area index of consumer prices (EEAICP), which in addition to the EU also covers Iceland and Norway. The official country-group aggregates reflect the evolution of Economic and monetary union (EA), the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. In addition to these official aggregates, Eurostat also computes, for analytical purposes, country aggregates with stable composition over time. For example, the aggregate 'EU-28' shows price indices covering all current 28 Member States since 1997. HICP for Turkey (candidate country) is also published. For the USA, a proxy-HICP for the all-items and main headings is available. The national HICP is produced by National Statistical Institutes, while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database includes price indices and rates (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around one hundred sub-indices for different goods and services and over thirty special aggregates are made available. The relative weights for the indices, including the special aggregates, are published for the individual countries and for the country groups, once a year, with the January data. An early estimate of the overall inflation rate for the euro area, as well as for selected components, are published monthly, usually on the last working day of the reference month, both as a News Release and in the database. They are called 'HICP flash estimates'. HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes (e.g. VAT and excise duties) on the overall inflation (more information).

The Unemployment - LFS adjusted series (including also Harmonised long-term unemployment) is a collection of monthly, quarterly and annual series based on the quarterly results of the EU Labour Force Survey (EU-LFS), which are, where necessary, adjusted and enriched in various ways, in accordance with the specificities of an indicator. Harmonised unemployment is published in the section 'LFS main indicators', which is a collection of the main statistics on the labour market. However the harmonized unemployment indicators are calculated with special methods and periodicity which justify the present page. This page focuses on the particularities of the estimation of harmonised unemployment (including unemployment rates). Other information on 'LFS main indicators' can be found in the respective ESMS page, see link in section 'related metadata'. General information on the EU-LFS can be found in the ESMS page for 'Employment and unemployment (LFS)'.  Detailed information on the main features, the legal basis, the methodology and the data as well as on the historical development of the EU-LFS is available on the EU-LFS (Statistics Explained) webpage.

Unemployed persons comprise persons aged 15 to 74 who were without work during the reference week, were currently available for work and were either actively seeking work in the past four weeks or had already found a job to start within the next three months.

Unemployed persons comprise here persons aged 15 to 24 who were without work during the reference week, were currently available for work and were either actively seeking work in the past four weeks or had already found a job to start within the next three months.

Unemployed persons comprise here persons aged 25 to 74 who were without work during the reference week, were currently available for work and were either actively seeking work in the past four weeks or had already found a job to start within the next three months.

The unemployment rate represents unemployed persons as a percentage of the labour force based on International Labour Office (ILO) definition. The labour force is the total number of people employed and unemployed. Unemployed persons comprise persons aged 15 to 74 who: - are without work during the reference week; - are available to start work within the next two weeks; - and have been actively seeking work in the past four weeks or had already found a job to start within the next three months. Data are presented in seasonally adjusted form.

The unemployment rate represents unemployed persons as a percentage of the labour force based on International Labour Office (ILO) definition, which here refers to the total number of employed and unemployed persons aged 15 to 24. Unemployed persons comprise here persons aged 15 to 24 who: - are without work; - are available to start work within the next two weeks; - and have been actively seeking work in the past four weeks or had already found a job to start within the next three months. Data are presented in seasonally adjusted form.

The unemployment rate represents unemployed persons, based on International Labour Office (ILO) definition, as a percentage of the labour force, which here refers to the total number of employed and unemployed persons aged 25 to 74. Unemployed persons comprise here persons aged 25 to 74 who: - are without work; - are available to start work within the next two weeks; - and have been actively seeking work in the past four weeks or had already found a job to start within the next three months. Data are presented in seasonally adjusted form.

The Unemployment - LFS adjusted series (including also Harmonised long-term unemployment) is a collection of monthly, quarterly and annual series based on the quarterly results of the EU Labour Force Survey (EU-LFS), which are, where necessary, adjusted and enriched in various ways, in accordance with the specificities of an indicator. Harmonised unemployment is published in the section 'LFS main indicators', which is a collection of the main statistics on the labour market. However the harmonized unemployment indicators are calculated with special methods and periodidicty which justify the present page. This page focuses on the particularities of the estimation of harmonised unemployment (including unemployment rates). Other information on 'LFS main indicators' can be found in the respective ESMS page, see link in section 'related metadata'. General information on the EU-LFS can be found in the ESMS page for 'Employment and unemployment (LFS)'.  Detailed information on the main features, the legal basis, the methodology and the data as well as on the historical development of the EU-LFS is available on the EU-LFS (Statistics Explained) webpage.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

Harmonised Indices of Consumer Prices (HICP) are designed for international comparisons of consumer price inflation. HICPs are used for the assessment of the inflation convergence criterion as required under Article 121 of the Treaty of Amsterdam and by the ECB for assessing price stability for monetary policy purposes. The ECB defines price stability on the basis of the annual rate of change of the euro area HICP. HICPs are compiled on the basis of harmonised standards, binding for all Member States. Conceptually, the HICP are Laspeyres-type price indices and are computed as annual chain-indices allowing for weights changing each year. The common classification for Harmonized Indices of Consumer Prices is the COICOP (Classification Of Individual COnsumption by Purpose). A version of this classification (COICOP/HICP) has been specially adapted for the HICP. Sub-indices published by Eurostat are based on this classification. HICP are produced and published using a common index reference period (2015 = 100). Growth rates are calculated from published index levels. Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are neither calendar nor seasonally adjusted.

The Harmonised Index of Consumer Prices (HICP) gives comparable measures of inflation for the countries and country groups for which it is produced. It is an economic indicator that measures the change over time of the prices of consumer goods and services acquired by households. In other words, it is a set of consumer price indices (CPI) calculated according to a harmonised approach and a set of definitions as laid down in Regulations and recommendations. In addition, the HICP provides the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. The HICP is available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the euro area, the European Union (EU), and the European Economic Area (EEA), which, in addition to the EU, also covers Iceland and Norway, but not Liechtenstein. The official country-group aggregates reflect the changing country composition of the EA, the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. For analytical purposes Eurostat also computes country-group aggregates with stable country composition over time. For example, the EU28 aggregate shows price indices covering all current 28 Member States since 1997. The HICP for Serbia and Turkey (candidate countries) are also published. That data are flagged 'd' ('definition differs'). A proxy-HICP for the all-items and main aggregates is available for the USA. National HICPs are produced by National Statistical Institutes (NSIs), while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database include price indices and rates of change (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around four hundred sub-indices for different goods and services and over thirty special aggregates are available, including the HICP at administered prices (HICP-AP). Once a year, with the release of the January data, the relative weights for the indices and the special aggregates, are published for the individual countries and for the European aggregates. The composition of the HICP-AP aggregates, i.e. which sub-indices are classified as mainly or fully administered by each Member State, is also updated at the same time. Eurostat publishes early estimates, called 'HICP flash estimates', of the euro area overall inflation rate and selected components. They are published monthly, usually on the last working day of the reference month, and disseminated in a news release, in the database and in a Statistics Explained article. The HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes, such as VAT and excise duties, on the overall inflation (more information). Flags Flags provide information about the 'status' of the data or a specific data value. The following flags are used for the HICP data in the Eurostat online database: p = provisional data: Data is flagged as provisional by the National Statistical Institutes to signal that data are still being treated or validated. The 'p' flag remains attached to the HICP data values in question for one month only. r = revised data. In the case when the most recent figures published differ from previously disseminated data, they are flagged with 'r'. Countries are allowed to revise their HICP figures at any point and, therefore, revised figures may appear in historic data. The 'r' flag remains attached to the HICP data values in question for one month only. e = estimated data. All the figures of the HICP flash estimate are marked with the 'e' flag. d = definition differs, meaning that the national definition of a series differs from the ECOICOP (European Classification of Individual Consumption according to Purpose) definition. It is also used for data values from countries for which conformity with the requirements of the HICP methodology has not yet been evaluated by Eurostat, including candidate countries, pre-candidate countries, new EU Member States and the United States of America. u = unreliable data. Data is flagged as unreliable by the National Statistical Institutes.

The Harmonised Index of Consumer Prices (HICP) gives comparable measures of inflation for the countries and country groups for which it is produced. It is an economic indicator that measures the change over time of the prices of consumer goods and services acquired by households. In other words, it is a set of consumer price indices (CPI) calculated according to a harmonised approach and a set of definitions as laid down in Regulations and recommendations. In addition, the HICP provides the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. The HICP is available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the euro area, the European Union (EU), and the European Economic Area (EEA), which, in addition to the EU, also covers Iceland and Norway, but not Liechtenstein. The official country-group aggregates reflect the changing country composition of the EA, the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. For analytical purposes Eurostat also computes country-group aggregates with stable country composition over time. For example, the EU28 aggregate shows price indices covering all current 28 Member States since 1997. The HICP for Serbia and Turkey (candidate countries) are also published. That data are flagged 'd' ('definition differs'). A proxy-HICP for the all-items and main aggregates is available for the USA. National HICPs are produced by National Statistical Institutes (NSIs), while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database include price indices and rates of change (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around four hundred sub-indices for different goods and services and over thirty special aggregates are available, including the HICP at administered prices (HICP-AP). Once a year, with the release of the January data, the relative weights for the indices and the special aggregates, are published for the individual countries and for the European aggregates. The composition of the HICP-AP aggregates, i.e. which sub-indices are classified as mainly or fully administered by each Member State, is also updated at the same time. Eurostat publishes early estimates, called 'HICP flash estimates', of the euro area overall inflation rate and selected components. They are published monthly, usually on the last working day of the reference month, and disseminated in a news release, in the database and in a Statistics Explained article. The HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes, such as VAT and excise duties, on the overall inflation (more information). Flags Flags provide information about the 'status' of the data or a specific data value. The following flags are used for the HICP data in the Eurostat online database: p = provisional data: Data is flagged as provisional by the National Statistical Institutes to signal that data are still being treated or validated. The 'p' flag remains attached to the HICP data values in question for one month only. r = revised data. In the case when the most recent figures published differ from previously disseminated data, they are flagged with 'r'. Countries are allowed to revise their HICP figures at any point and, therefore, revised figures may appear in historic data. The 'r' flag remains attached to the HICP data values in question for one month only. e = estimated data. All the figures of the HICP flash estimate are marked with the 'e' flag. d = definition differs, meaning that the national definition of a series differs from the ECOICOP (European Classification of Individual Consumption according to Purpose) definition. It is also used for data values from countries for which conformity with the requirements of the HICP methodology has not yet been evaluated by Eurostat, including candidate countries, pre-candidate countries, new EU Member States and the United States of America. u = unreliable data. Data is flagged as unreliable by the National Statistical Institutes.

The Harmonised Index of Consumer Prices (HICP) gives comparable measures of inflation for the countries and country groups for which it is produced. It is an economic indicator that measures the change over time of the prices of consumer goods and services acquired by households. In other words, it is a set of consumer price indices (CPI) calculated according to a harmonised approach and a set of definitions as laid down in Regulations and recommendations. In addition, the HICP provides the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. The HICP is available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the euro area, the European Union (EU), and the European Economic Area (EEA), which, in addition to the EU, also covers Iceland and Norway, but not Liechtenstein. The official country-group aggregates reflect the changing country composition of the EA, the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. For analytical purposes Eurostat also computes country-group aggregates with stable country composition over time. For example, the EU28 aggregate shows price indices covering all current 28 Member States since 1997. The HICP for Serbia and Turkey (candidate countries) are also published. That data are flagged 'd' ('definition differs'). A proxy-HICP for the all-items and main aggregates is available for the USA. National HICPs are produced by National Statistical Institutes (NSIs), while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database include price indices and rates of change (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around four hundred sub-indices for different goods and services and over thirty special aggregates are available, including the HICP at administered prices (HICP-AP). Once a year, with the release of the January data, the relative weights for the indices and the special aggregates, are published for the individual countries and for the European aggregates. The composition of the HICP-AP aggregates, i.e. which sub-indices are classified as mainly or fully administered by each Member State, is also updated at the same time. Eurostat publishes early estimates, called 'HICP flash estimates', of the euro area overall inflation rate and selected components. They are published monthly, usually on the last working day of the reference month, and disseminated in a news release, in the database and in a Statistics Explained article. The HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes, such as VAT and excise duties, on the overall inflation (more information). Flags Flags provide information about the 'status' of the data or a specific data value. The following flags are used for the HICP data in the Eurostat online database: p = provisional data: Data is flagged as provisional by the National Statistical Institutes to signal that data are still being treated or validated. The 'p' flag remains attached to the HICP data values in question for one month only. r = revised data. In the case when the most recent figures published differ from previously disseminated data, they are flagged with 'r'. Countries are allowed to revise their HICP figures at any point and, therefore, revised figures may appear in historic data. The 'r' flag remains attached to the HICP data values in question for one month only. e = estimated data. All the figures of the HICP flash estimate are marked with the 'e' flag. d = definition differs, meaning that the national definition of a series differs from the ECOICOP (European Classification of Individual Consumption according to Purpose) definition. It is also used for data values from countries for which conformity with the requirements of the HICP methodology has not yet been evaluated by Eurostat, including candidate countries, pre-candidate countries, new EU Member States and the United States of America. u = unreliable data. Data is flagged as unreliable by the National Statistical Institutes. The p, e, d and u flags described here do not affect the higher level of aggregation when assigned to a figure.

The Harmonised Index of Consumer Prices (HICP) gives comparable measures of inflation for the countries and country groups for which it is produced. It is an economic indicator that measures the change over time of the prices of consumer goods and services acquired by households. In other words, it is a set of consumer price indices (CPI) calculated according to a harmonised approach and a set of definitions as laid down in Regulations and recommendations. In addition, the HICP provides the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. The HICP is available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the euro area, the European Union (EU), and the European Economic Area (EEA), which, in addition to the EU, also covers Iceland and Norway, but not Liechtenstein. The official country-group aggregates reflect the changing country composition of the EA, the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. For analytical purposes Eurostat also computes country-group aggregates with stable country composition over time. For example, the EU28 aggregate shows price indices covering all current 28 Member States since 1997. The HICP for Serbia and Turkey (candidate countries) are also published. That data are flagged 'd' ('definition differs'). A proxy-HICP for the all-items and main aggregates is available for the USA. National HICPs are produced by National Statistical Institutes (NSIs), while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database include price indices and rates of change (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around four hundred sub-indices for different goods and services and over thirty special aggregates are available, including the HICP at administered prices (HICP-AP). Once a year, with the release of the January data, the relative weights for the indices and the special aggregates, are published for the individual countries and for the European aggregates. The composition of the HICP-AP aggregates, i.e. which sub-indices are classified as mainly or fully administered by each Member State, is also updated at the same time. Eurostat publishes early estimates, called 'HICP flash estimates', of the euro area overall inflation rate and selected components. They are published monthly, usually on the last working day of the reference month, and disseminated in a news release, in the database and in a Statistics Explained article. The HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes, such as VAT and excise duties, on the overall inflation (more information). Flags Flags provide information about the 'status' of the data or a specific data value. The following flags are used for the HICP data in the Eurostat online database: p = provisional data: Data is flagged as provisional by the National Statistical Institutes to signal that data are still being treated or validated. The 'p' flag remains attached to the HICP data values in question for one month only. r = revised data. In the case when the most recent figures published differ from previously disseminated data, they are flagged with 'r'. Countries are allowed to revise their HICP figures at any point and, therefore, revised figures may appear in historic data. The 'r' flag remains attached to the HICP data values in question for one month only. e = estimated data. All the figures of the HICP flash estimate are marked with the 'e' flag. d = definition differs, meaning that the national definition of a series differs from the ECOICOP (European Classification of Individual Consumption according to Purpose) definition. It is also used for data values from countries for which conformity with the requirements of the HICP methodology has not yet been evaluated by Eurostat, including candidate countries, pre-candidate countries, new EU Member States and the United States of America. u = unreliable data. Data is flagged as unreliable by the National Statistical Institutes.

The Harmonised Index of Consumer Prices (HICP) gives comparable measures of inflation for the countries and country groups for which it is produced. It is an economic indicator that measures the change over time of the prices of consumer goods and services acquired by households. In other words, it is a set of consumer price indices (CPI) calculated according to a harmonised approach and a set of definitions as laid down in Regulations and recommendations. In addition, the HICP provides the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. The HICP is available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the euro area, the European Union (EU), and the European Economic Area (EEA), which, in addition to the EU, also covers Iceland and Norway, but not Liechtenstein. The official country-group aggregates reflect the changing country composition of the EA, the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. For analytical purposes Eurostat also computes country-group aggregates with stable country composition over time. For example, the EU28 aggregate shows price indices covering all current 28 Member States since 1997. The HICP for Serbia and Turkey (candidate countries) are also published. That data are flagged 'd' ('definition differs'). A proxy-HICP for the all-items and main aggregates is available for the USA. National HICPs are produced by National Statistical Institutes (NSIs), while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database include price indices and rates of change (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around four hundred sub-indices for different goods and services and over thirty special aggregates are available, including the HICP at administered prices (HICP-AP). Once a year, with the release of the January data, the relative weights for the indices and the special aggregates, are published for the individual countries and for the European aggregates. The composition of the HICP-AP aggregates, i.e. which sub-indices are classified as mainly or fully administered by each Member State, is also updated at the same time. Eurostat publishes early estimates, called 'HICP flash estimates', of the euro area overall inflation rate and selected components. They are published monthly, usually on the last working day of the reference month, and disseminated in a news release, in the database and in a Statistics Explained article. The HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes, such as VAT and excise duties, on the overall inflation (more information). Flags Flags provide information about the 'status' of the data or a specific data value. The following flags are used for the HICP data in the Eurostat online database: p = provisional data: Data is flagged as provisional by the National Statistical Institutes to signal that data are still being treated or validated. The 'p' flag remains attached to the HICP data values in question for one month only. r = revised data. In the case when the most recent figures published differ from previously disseminated data, they are flagged with 'r'. Countries are allowed to revise their HICP figures at any point and, therefore, revised figures may appear in historic data. The 'r' flag remains attached to the HICP data values in question for one month only. e = estimated data. All the figures of the HICP flash estimate are marked with the 'e' flag. d = definition differs, meaning that the national definition of a series differs from the ECOICOP (European Classification of Individual Consumption according to Purpose) definition. It is also used for data values from countries for which conformity with the requirements of the HICP methodology has not yet been evaluated by Eurostat, including candidate countries, pre-candidate countries, new EU Member States and the United States of America. u = unreliable data. Data is flagged as unreliable by the National Statistical Institutes. The p, e, d and u flags described here do not affect the higher level of aggregation when assigned to a figure.

The Harmonised Index of Consumer Prices (HICP) gives comparable measures of inflation for the countries and country groups for which it is produced. It is an economic indicator that measures the change over time of the prices of consumer goods and services acquired by households. In other words, it is a set of consumer price indices (CPI) calculated according to a harmonised approach and a set of definitions as laid down in Regulations and recommendations. In addition, the HICP provides the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. The HICP is available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the euro area, the European Union (EU), and the European Economic Area (EEA), which, in addition to the EU, also covers Iceland and Norway, but not Liechtenstein. The official country-group aggregates reflect the changing country composition of the EA, the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. For analytical purposes Eurostat also computes country-group aggregates with stable country composition over time. For example, the EU28 aggregate shows price indices covering all current 28 Member States since 1997. The HICP for Serbia and Turkey (candidate countries) are also published. That data are flagged 'd' ('definition differs'). A proxy-HICP for the all-items and main aggregates is available for the USA. National HICPs are produced by National Statistical Institutes (NSIs), while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database include price indices and rates of change (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around four hundred sub-indices for different goods and services and over thirty special aggregates are available, including the HICP at administered prices (HICP-AP). Once a year, with the release of the January data, the relative weights for the indices and the special aggregates, are published for the individual countries and for the European aggregates. The composition of the HICP-AP aggregates, i.e. which sub-indices are classified as mainly or fully administered by each Member State, is also updated at the same time. Eurostat publishes early estimates, called 'HICP flash estimates', of the euro area overall inflation rate and selected components. They are published monthly, usually on the last working day of the reference month, and disseminated in a news release, in the database and in a Statistics Explained article. The HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes, such as VAT and excise duties, on the overall inflation (more information). Flags Flags provide information about the 'status' of the data or a specific data value. The following flags are used for the HICP data in the Eurostat online database: p = provisional data: Data is flagged as provisional by the National Statistical Institutes to signal that data are still being treated or validated. The 'p' flag remains attached to the HICP data values in question for one month only. r = revised data. In the case when the most recent figures published differ from previously disseminated data, they are flagged with 'r'. Countries are allowed to revise their HICP figures at any point and, therefore, revised figures may appear in historic data. The 'r' flag remains attached to the HICP data values in question for one month only. e = estimated data. All the figures of the HICP flash estimate are marked with the 'e' flag. d = definition differs, meaning that the national definition of a series differs from the ECOICOP (European Classification of Individual Consumption according to Purpose) definition. It is also used for data values from countries for which conformity with the requirements of the HICP methodology has not yet been evaluated by Eurostat, including candidate countries, pre-candidate countries, new EU Member States and the United States of America. u = unreliable data. Data is flagged as unreliable by the National Statistical Institutes. The p, e, d and u flags described here do not affect the higher level of aggregation when assigned to a figure.

The Harmonised Index of Consumer Prices (HICP) gives comparable measures of inflation for the countries and country groups for which it is produced. It is an economic indicator that measures the change over time of the prices of consumer goods and services acquired by households. In other words, it is a set of consumer price indices (CPI) calculated according to a harmonised approach and a set of definitions as laid down in Regulations and recommendations. In addition, the HICP provides the official measure of consumer price inflation in the euro area for the purposes of monetary policy and the assessment of inflation convergence as required under the Maastricht criteria for accession to the euro. The HICP is available for all EU Member States, Iceland, Norway and Switzerland. In addition to the individual country series there are three key country-group aggregate indices: the euro area, the European Union (EU), and the European Economic Area (EEA), which, in addition to the EU, also covers Iceland and Norway, but not Liechtenstein. The official country-group aggregates reflect the changing country composition of the EA, the EU and the EEA. The HICP for new Member States is chained into the aggregate indices at the time of accession. For analytical purposes Eurostat also computes country-group aggregates with stable country composition over time. For example, the EU28 aggregate shows price indices covering all current 28 Member States since 1997. The HICP for Serbia and Turkey (candidate countries) are also published. That data are flagged 'd' ('definition differs'). A proxy-HICP for the all-items and main aggregates is available for the USA. National HICPs are produced by National Statistical Institutes (NSIs), while the country-group aggregates are produced by Eurostat. The data released monthly on Eurostat's free dissemination database include price indices and rates of change (monthly, annual and 12-month moving average changes). In addition to the headline figure 'all-items HICP', around four hundred sub-indices for different goods and services and over thirty special aggregates are available, including the HICP at administered prices (HICP-AP). Once a year, with the release of the January data, the relative weights for the indices and the special aggregates, are published for the individual countries and for the European aggregates. The composition of the HICP-AP aggregates, i.e. which sub-indices are classified as mainly or fully administered by each Member State, is also updated at the same time. Eurostat publishes early estimates, called 'HICP flash estimates', of the euro area overall inflation rate and selected components. They are published monthly, usually on the last working day of the reference month, and disseminated in a news release, in the database and in a Statistics Explained article. The HICP at constant tax rates (HICP-CT) follows the same computation principles as the HICP, but is based on prices at constant tax rates. The comparison with the standard HICP can show the potential impact of changes in indirect taxes, such as VAT and excise duties, on the overall inflation (more information). Flags Flags provide information about the 'status' of the data or a specific data value. The following flags are used for the HICP data in the Eurostat online database: p = provisional data: Data is flagged as provisional by the National Statistical Institutes to signal that data are still being treated or validated. The 'p' flag remains attached to the HICP data values in question for one month only. r = revised data. In the case when the most recent figures published differ from previously disseminated data, they are flagged with 'r'. Countries are allowed to revise their HICP figures at any point and, therefore, revised figures may appear in historic data. The 'r' flag remains attached to the HICP data values in question for one month only. e = estimated data. All the figures of the HICP flash estimate are marked with the 'e' flag. d = definition differs, meaning that the national definition of a series differs from the ECOICOP (European Classification of Individual Consumption according to Purpose) definition. It is also used for data values from countries for which conformity with the requirements of the HICP methodology has not yet been evaluated by Eurostat, including candidate countries, pre-candidate countries, new EU Member States and the United States of America. u = unreliable data. Data is flagged as unreliable by the National Statistical Institutes. The p, e, d and u flags described here do not affect the higher level of aggregation when assigned to a figure.

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

The industrial import price index (IPI) measures the monthly transaction price development of imported goods purchased from non-domestic areas by domestic residents. IPI permits monthly monitoring of prices for different categories of products or group of products. They are also a means to distinguish real growth of imports from price changes in the foreign trade statistics and in the national accounts. Data are compiled according to the Classification of Products by Activity (CPA). The breakdowns are based on aggregates derived from the MIGs (Main Industrial Groupings). Industrial import prices are compiled as a fixed base year Laspeyres type price-index (except for Luxembourg). The current base year is 2015 (Index 2015 =100). Indexes, as well as both growth rates with respect to the previous month (M/M-1) and with respect to the corresponding month of the previous year (M/M-12) are compiled from raw data.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Imports are recorded by country of origin, exports by country of destination; quantities are regarded as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.  The concept of the physical movement of flows applies. The monthly imports and exports data collections cover following energy commodities:solid  fuels (hard coal only)oil and petroleum productsgaselectricity      For solid fuels, crude oil and NGLs, imports and exports are reported by country of ultimate origin, respectively destination, while natural gas, refinery products and feedstocks as well as electricity are reported as coming from the country of last consignment. Quantities of crude oil and petroleum products imported or exported under processing agreements (i.e. refining on account) should be included. However, transit trade, international marine and aviation bunkers are excluded from this data set. Please note that this is different from the definition of natural gas trade in the annual gas questionnaire and from the definition in the previous monthly oil and gas questionnaire (before January 2013). For further information, please consult the Energy Statistics Regulation (Regulation (EC) 1099/2008 on energy statistics) and the reporting instructions. Monthly imports and exports of energy commodities cover the full spectrum of the 28 Member States of the European Union, EFTA States, candidate countries and potential candidates. Â

Imports are recorded by country of origin, exports by country of destination; quantities are regarded as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.  The concept of the physical movement of flows applies. The monthly imports and exports data collections cover following energy commodities:solid  fuels (hard coal only)oil and petroleum productsgaselectricity      For solid fuels, crude oil and NGLs, imports and exports are reported by country of ultimate origin, respectively destination, while natural gas, refinery products and feedstocks as well as electricity are reported as coming from the country of last consignment. Quantities of crude oil and petroleum products imported or exported under processing agreements (i.e. refining on account) should be included. However, transit trade, international marine and aviation bunkers are excluded from this data set. Please note that this is different from the definition of natural gas trade in the annual gas questionnaire and from the definition in the previous monthly oil and gas questionnaire (before January 2013). For further information, please consult the Energy Statistics Regulation (Regulation (EC) 1099/2008 on energy statistics) and the reporting instructions. Monthly imports and exports of energy commodities cover the full spectrum of the 28 Member States of the European Union, EFTA States, candidate countries and potential candidates. Â

Imports are recorded by country of origin, exports by country of destination; quantities are regarded as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.  The concept of the physical movement of flows applies. The monthly imports and exports data collections cover following energy commodities:solid  fuels (hard coal only)oil and petroleum productsgaselectricity      For solid fuels, crude oil and NGLs, imports and exports are reported by country of ultimate origin, respectively destination, while natural gas, refinery products and feedstocks as well as electricity are reported as coming from the country of last consignment. Quantities of crude oil and petroleum products imported or exported under processing agreements (i.e. refining on account) should be included. However, transit trade, international marine and aviation bunkers are excluded from this data set. Please note that this is different from the definition of natural gas trade in the annual gas questionnaire and from the definition in the previous monthly oil and gas questionnaire (before January 2013). For further information, please consult the Energy Statistics Regulation (Regulation (EC) 1099/2008 on energy statistics) and the reporting instructions. Monthly imports and exports of energy commodities cover the full spectrum of the 28 Member States of the European Union, EFTA States, candidate countries and potential candidates.

Imports are recorded by country of origin, exports by country of destination; quantities are regarded as imported or exported when they have crossed the political boundaries of the country, whether customs clearance has taken place or not.  The concept of the physical movement of flows applies. The monthly imports and exports data collections cover following energy commodities:solid  fuels (hard coal only)oil and petroleum productsgaselectricity      For solid fuels, crude oil and NGLs, imports and exports are reported by country of ultimate origin, respectively destination, while natural gas, refinery products and feedstocks as well as electricity are reported as coming from the country of last consignment. Quantities of crude oil and petroleum products imported or exported under processing agreements (i.e. refining on account) should be included. However, transit trade, international marine and aviation bunkers are excluded from this data set. Please note that this is different from the definition of natural gas trade in the annual gas questionnaire and from the definition in the previous monthly oil and gas questionnaire (before January 2013). For further information, please consult the Energy Statistics Regulation (Regulation (EC) 1099/2008 on energy statistics) and the reporting instructions. Monthly imports and exports of energy commodities cover the full spectrum of the 28 Member States of the European Union, EFTA States, candidate countries and potential candidates. Â

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). Goods are physical, produced items over which ownership rights can be established and whose economic ownership can be passed from one institutional unit to another by engaging in transactions. The product breakdowns available in Newcronos/Euro-indicators are based on aggregates derived from the Broad Economic Categories (BEC) classification and the Standard International Trade Classification (SITC).

International trade statistics cover any movements of goods between the EU Member States and non-member countries (extra-EU trade), and from one Member State to another (intra-EU trade). 'Goods' means all movable property, including electric current.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. This indicator conveys the number of persons of working age outside the labour force (that is, not employed or unemployed) expressed as a percentage of the working-age population. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. This indicator conveys the number of persons of working age outside the labour force (that is, not employed or unemployed) expressed as a percentage of the working-age population. Data disaggregated by level of education are provided on the highest level of education completed, classified according to the International Standard Classification of Education (ISCED). Data may have been regrouped from national classifications, which may not be strictly compatible with ISCED. For more information, refer to the Education and Mismatch Indicators (EMI) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. This indicator conveys the number of persons of working age outside the labour force (that is, not employed or unemployed) expressed as a percentage of the working-age population. For more information, refer to the Rural and Urban Labour Market Statistics (RURBAN) database description.

Nominal effective series measure changes in the value of a currency against a trade-weighted basket of currencies. A rise in the index means a strengthening of the currency. Real effective series are a measure of the change in competitiveness of a country or geographical area, by taking into account the change in costs or prices relative to other countries. A rise in the index means a loss of competitiveness. The collection comprises industrial countries' effective exchange rates. It is produced by the European Commission (DG ECFIN).

Eurostat Dataset Id:ei_bsin_m_r2 Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published:as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

Industry, Trade and Services statistics are part of Short-term statistics (STS), they give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification(Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are presented in the following forms:UnadjustedCalendar adjustedSeasonally-adjusted Depending on the STS regulation, data are accessible monthly and quarterly. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction Index*Turnover IndexProducer Prices (Domestic Output Prices index)*Import Prices Index*: Total, Euro area market, Non euro area market (euro area countries only)Labour Input Indicators: Number of Persons Employed, Hours Worked, Gross Wages and Salaries CONSTRUCTIONProduction Index*: Total of the construction sector, Building construction, Civil EngineeringLabour input indicators: Number of Persons Employed, Hours Worked, Gross Wages and SalariesConstruction costs IndexBuilding permits indicators*: Number of dwellings WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (in value)Labour input indicators: Number of Persons Employed SERVICES Turnover Index*Producer prices (Ouput prices)*

Eurostat Dataset Id:ei_bsin_m Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published:as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

Eurostat Dataset Id:ei_bsin_m_bc Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published: as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

Industry, Trade and Services statistics are part of Short-term statistics (STS), they give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification(Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are presented in the following forms:UnadjustedCalendar adjustedSeasonally-adjusted Depending on the STS regulation, data are accessible monthly and quarterly. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction Index*Turnover IndexProducer Prices (Domestic Output Prices index)*Import Prices Index*: Total, Euro area market, Non euro area market (euro area countries only)Labour Input Indicators: Number of Persons Employed, Hours Worked, Gross Wages and Salaries CONSTRUCTIONProduction Index*: Total of the construction sector, Building construction, Civil EngineeringLabour input indicators: Number of Persons Employed, Hours Worked, Gross Wages and SalariesConstruction costs IndexBuilding permits indicators*: Number of dwellings WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (in value)Labour input indicators: Number of Persons Employed SERVICES Turnover Index*Producer prices (Ouput prices)*

The present data collection consists of the following indicators:Interest rates : Day-to-day money market interest rates, 3-month interest rates, Euro yields and Long term government bond yields - Maastricht definitionEuro/Ecu exchange rates: Exchange rates against the ECU/euroEffective exchange rates indices : Nominal Effective Exchange Rate, Real Effective Exchange Rate Â

Data retrieved from FRED, Federal Reserve Bank of St. Louis; https://fred.stlouisfed.org/   FRED Economic Research Division "International Data" dataset contains series for the following categories: money, banking & finance; national accounts; population, employment & labor markets; production & business activity; prices; work started; consumer opinion surveys; business tendency surveys (construction); business tendency surveys (services); business tendency surveys (manufacturing); business tendency surveys (non-manufacturing); leading indicators OECD; business tendency surveys (retail trade).

The Air transport domain contains national and international intra and extra-EU data. This provides air transport data for passengers (in number of passengers) and for freight and mail (in 1 000 tonnes) as well as air traffic data by airports, airlines and aircraft. Data are transmitted to Eurostat by the Member States of the European Union as well as the Candidate Countries, Iceland, Norway and Switzerland. The air transport data have been calculated using data collected at airport level. The data are presented in four sub-domains:Air Transport measurement - PassengersAir Transport measurement - Freight and mailAir Transport measurement - Traffic data by airports, aircraft and airlinesAir Transport measurement - Data aggregated at standard regional levels (NUTS). The two first domains contain several data collections:Overview of the air transport by country and airport,National air transport by country and airport,International intra-EU air transport by country and airport,International extra-EU air transport by country and airport,Detailed air transport by reporting country and routes. In the tables of the sub-domain "Transport measurement - Passengers", data are broken down by passengers on board (arrivals, departures and total), passengers carried (arrivals, departures and total) and passenger commercial air flights (arrival, departures and total). Additionally, the tables of collection "Detailed air transport by reporting country and routes" provide data on seats available (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Freight and mail", data are broken down by freight and mail on board (arrival, departures and total), freight and mail loaded/unloaded (loaded, unloaded and total) and all-freight and mail commercial air flights (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Traffic by airports, aircraft and airlines": - Data by type of aircraft are broken down by total passengers on board, total freight and mail on board in tonnes, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by type of airline are broken down by total passengers on board, total passengers carried, total freight and mail on board, total freight and mail loaded/unloaded, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by airport are broken down by total passengers carried, total transit passengers, total freight and mail loaded/unloaded, total commercial aircraft movements, total aircraft movements. The data is presented at monthly, quarterly and annual level. The sub-domain "Transport measurement - Data aggregated at standard regional levels (NUTS)", contains two tables:Air transport of passengers at regional levelAir transport of freight at regional level The tables present the evolution of the number of passengers carried (if not available passengers on board) and the volume of freight and mail loaded or unloaded (if not available freight and mail on board) to/from the NUTS regions (level 2, 1 and 0) since 1999. The data is presented at annual level. The air transport regional data have been calculated using data collected at the airport level in the frame of the regulatory data collection on air transport. More information can be found in Regional transport statistics metadata file.

The Air transport domain contains national and international intra and extra-EU data. This provides air transport data for passengers (in number of passengers) and for freight and mail (in 1 000 tonnes) as well as air traffic data by airports, airlines and aircraft. Data are transmitted to Eurostat by the Member States of the European Union as well as the Candidate Countries, Iceland, Norway and Switzerland. The air transport data have been calculated using data collected at airport level. The data are presented in four sub-domains:Air Transport measurement - PassengersAir Transport measurement - Freight and mailAir Transport measurement - Traffic data by airports, aircraft and airlinesAir Transport measurement - Data aggregated at standard regional levels (NUTS). The two first domains contain several data collections:Overview of the air transport by country and airport,National air transport by country and airport,International intra-EU air transport by country and airport,International extra-EU air transport by country and airport,Detailed air transport by reporting country and routes. In the tables of the sub-domain "Transport measurement - Passengers", data are broken down by passengers on board (arrivals, departures and total), passengers carried (arrivals, departures and total) and passenger commercial air flights (arrival, departures and total). Additionally, the tables of collection "Detailed air transport by reporting country and routes" provide data on seats available (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Freight and mail", data are broken down by freight and mail on board (arrival, departures and total), freight and mail loaded/unloaded (loaded, unloaded and total) and all-freight and mail commercial air flights (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Traffic by airports, aircraft and airlines": - Data by type of aircraft are broken down by total passengers on board, total freight and mail on board in tonnes, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by type of airline are broken down by total passengers on board, total passengers carried, total freight and mail on board, total freight and mail loaded/unloaded, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by airport are broken down by total passengers carried, total transit passengers, total freight and mail loaded/unloaded, total commercial aircraft movements, total aircraft movements. The data is presented at monthly, quarterly and annual level. The sub-domain "Transport measurement - Data aggregated at standard regional levels (NUTS)", contains two tables:Air transport of passengers at regional levelAir transport of freight at regional level The tables present the evolution of the number of passengers carried (if not available passengers on board) and the volume of freight and mail loaded or unloaded (if not available freight and mail on board) to/from the NUTS regions (level 2, 1 and 0) since 1999. The data is presented at annual level. The air transport regional data have been calculated using data collected at the airport level in the frame of the regulatory data collection on air transport. More information can be found in Regional transport statistics metadata file.

Data cited at: International Financial Statistics (IFS), The International Monetary Fund. The International Financial Statistics database covers about 200 countries and areas, with some aggregates calculated for selected regions, plus some world totals. Topics covered include balance of payments, commodity prices, exchange rates, fund position, government finance, industrial production, interest rates, international investment position, international liquidity, international transactions, labor statistics, money and banking, national accounts, population, prices, and real effective exchange rates. The International Financial Statistics is based on various IMF data collections. It includes exchange rates series for all Fund member countries plus Anguilla, Aruba, China, PR: Hong Kong, China, PR: Macao, Montserrat, and the Netherlands Antilles. It also includes major Fund accounts series, real effective exchange rates, and other world, area, and country series. Data are available for most IMF member countries with some aggregates calculated for select regions, plus some world totals. National Accounts, Indicators of Economic Activity, Labor Markets, Prices, Government and Public Sector Finance, Financial Indicators, Balance of Payments, International Investment Position, International Reserves, Fund Accounts, External Trade, Exchange Rates, and Population.

The Air transport domain contains national and international intra and extra-EU data. This provides air transport data for passengers (in number of passengers) and for freight and mail (in 1 000 tonnes) as well as air traffic data by airports, airlines and aircraft. Data are transmitted to Eurostat by the Member States of the European Union as well as the Candidate Countries, Iceland, Norway and Switzerland. The air transport data have been calculated using data collected at airport level. The data are presented in four sub-domains: Air Transport measurement - PassengersAir Transport measurement - Freight and mailAir Transport measurement - Traffic data by airports, aircraft and airlinesAir Transport measurement - Data aggregated at standard regional levels (NUTS). The two first domains contain several data collections: Overview of the air transport by country and airport,National air transport by country and airport,International intra-EU air transport by country and airport,International extra-EU air transport by country and airport,Detailed air transport by reporting country and routes. In the tables of the sub-domain "Transport measurement - Passengers", data are broken down by passengers on board (arrivals, departures and total), passengers carried (arrivals, departures and total) and passenger commercial air flights (arrival, departures and total). Additionally, the tables of collection "Detailed air transport by reporting country and routes" provide data on seats available (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Freight and mail", data are broken down by freight and mail on board (arrival, departures and total), freight and mail loaded/unloaded (loaded, unloaded and total) and all-freight and mail commercial air flights (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Traffic by airports, aircraft and airlines": - Data by type of aircraft are broken down by total passengers on board, total freight and mail on board in tonnes, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by type of airline are broken down by total passengers on board, total passengers carried, total freight and mail on board, total freight and mail loaded/unloaded, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by airport are broken down by total passengers carried, total transit passengers, total freight and mail loaded/unloaded, total commercial aircraft movements, total aircraft movements. The data is presented at monthly, quarterly and annual level. The sub-domain "Transport measurement - Data aggregated at standard regional levels (NUTS)", contains two tables: Air transport of passengers at regional levelAir transport of freight at regional level The tables present the evolution of the number of passengers carried (if not available passengers on board) and the volume of freight and mail loaded or unloaded (if not available freight and mail on board) to/from the NUTS regions (level 2, 1 and 0) since 1999. The data is presented at annual level. The air transport regional data have been calculated using data collected at the airport level in the frame of the regulatory data collection on air transport. More information can be found in Regional transport statistics metadata file.

The Air transport domain contains national and international intra and extra-EU data. This provides air transport data for passengers (in number of passengers) and for freight and mail (in 1 000 tonnes) as well as air traffic data by airports, airlines and aircraft. Data are transmitted to Eurostat by the Member States of the European Union as well as the Candidate Countries, Iceland, Norway and Switzerland. The air transport data have been calculated using data collected at airport level. The data are presented in four sub-domains:Air Transport measurement - PassengersAir Transport measurement - Freight and mailAir Transport measurement - Traffic data by airports, aircraft and airlinesAir Transport measurement - Data aggregated at standard regional levels (NUTS). The two first domains contain several data collections:Overview of the air transport by country and airport,National air transport by country and airport,International intra-EU air transport by country and airport,International extra-EU air transport by country and airport,Detailed air transport by reporting country and routes. In the tables of the sub-domain "Transport measurement - Passengers", data are broken down by passengers on board (arrivals, departures and total), passengers carried (arrivals, departures and total) and passenger commercial air flights (arrival, departures and total). Additionally, the tables of collection "Detailed air transport by reporting country and routes" provide data on seats available (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Freight and mail", data are broken down by freight and mail on board (arrival, departures and total), freight and mail loaded/unloaded (loaded, unloaded and total) and all-freight and mail commercial air flights (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Traffic by airports, aircraft and airlines": - Data by type of aircraft are broken down by total passengers on board, total freight and mail on board in tonnes, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by type of airline are broken down by total passengers on board, total passengers carried, total freight and mail on board, total freight and mail loaded/unloaded, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by airport are broken down by total passengers carried, total transit passengers, total freight and mail loaded/unloaded, total commercial aircraft movements, total aircraft movements. The data is presented at monthly, quarterly and annual level. The sub-domain "Transport measurement - Data aggregated at standard regional levels (NUTS)", contains two tables:Air transport of passengers at regional levelAir transport of freight at regional level The tables present the evolution of the number of passengers carried (if not available passengers on board) and the volume of freight and mail loaded or unloaded (if not available freight and mail on board) to/from the NUTS regions (level 2, 1 and 0) since 1999. The data is presented at annual level. The air transport regional data have been calculated using data collected at the airport level in the frame of the regulatory data collection on air transport. More information can be found in Regional transport statistics metadata file.

data cited at: Baker Hughes Rig Count Rotary Rig:  A rotary rig rotates the drill pipe from surface to drill a new well (or sidetracking an existing one) to explore for, develop and produce oil or natural gas. The Baker Hughes Rotary Rig count includes only those rigs that are significant consumers of oilfield services and supplies and does not include cable tool rigs, very small truck mounted rigs or rigs that can operate without a permit. Non-rotary rigs may be included in the count based on how they are employed. For example, coiled tubing and workover rigs employed in drilling new wells are included in the count.

The international goods and services deficit was $74.6 billion in April, up $14.0 billion from $60.6 billion in March. April exports were $249.0 billion, $9.2 billion less than March exports. April imports were $323.6 billion, $4.8 billion more than March imports. 

Data cited at:  CBS StatLine databank https://opendata.cbs.nl/statline/portal.html?_la=en&_catalog=CBS Publication: International trade; import and export value, SITC (3 digits), countries https://opendata.cbs.nl/portal.html?_la=en&_catalog=CBS&tableId=83926ENG&_theme=1017 License: http://creativecommons.org/licenses/by/4.0/   In this dataset the Dutch import, export value, trade balance and annual changes are broken down into sections, divisions and groups according to the Standard International Trade Classification (SITC). The data are further divided into continents and countries according to the Geonomenclature (GEONOM).

Data cited at: Internet World Stats  Internet World Stats is an International website that features up to date world Internet Usage, Population Statistics, Travel Stats and Internet Market Research Data, for over 233 individual countries and world regions.

The Joint Organisations Data Initiative is a concrete outcome of the producer-consumer energy dialogue. The initiative relies on the combined efforts of producing and consuming countries and the seven JODI partner organisations to build the timely, comprehensive, and sustainable energy data provision architecture which is a prerequisite for stable energy commodity markets. More than 90 countries/economies, Members of the six pioneer organisations (APEC, EUROSTAT, IEA, OLADE, OPEC and UNSD) participate in JODI Oil, representing around 90% of global oil supply and demand. When the Joint Organisations Data Initiative Oil (JODI Oil) was first launched in 2001, the primary goal was not to build a database but to raise the awareness of all oil market players to the need for more transparency in oil market data. The database consists of: seven product categories: crude oil, LPG, gasoline, kerosene, diesel oil, fuel oil and total oil products; eight flows: production, demand, refinery intake and output, imports, exports, closing stock levels and stock change; data in three different units: barrels, tons and litres; data for more than 90 participating countries; data from January 2002 to one month-old.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The labour force is the sum of all persons of working age who are employed and those who are unemployed. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The labour force is the sum of all persons of working age who are employed and those who are unemployed. Data disaggregated by level of education are provided on the highest level of education completed, classified according to the International Standard Classification of Education (ISCED). Data may have been regrouped from national classifications, which may not be strictly compatible with ISCED. For more information, refer to the Education and Mismatch Indicators (EMI) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The labour force is the sum of all persons of working age who are employed and those who are unemployed. For more information, refer to the Rural and Urban Labour Market Statistics (RURBAN) database description.

The labour force comprises all persons of working age who furnish the supply of labour for the production of goods and services during a specified time-reference period. It refers to the sum of all persons of working age who are employed and those who are unemployed. Data are disaggregated by level of education, which refers to the highest level of education completed, classified according to the International Standard Classification of Education (ISCE). For more information, refer to the concepts and definitions page.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The labour force participation rate is the labour force as a percent of the working-age population. The labour force is the sum of all persons of working age who are employed and those who are unemployed. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The employment-to-population ratio is the number of persons who are employed as a percent of the total of working-age population. Data disaggregated by level of education are provided on the highest level of education completed, classified according to the International Standard Classification of Education (ISCED). Data may have been regrouped from national classifications, which may not be strictly compatible with ISCED. For more information, refer to the Education and Mismatch Indicators (EMI) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The labour force participation rate is the labour force as a percent of the working-age population. The labour force is the sum of all persons of working age who are employed and those who are unemployed. Data disaggregated by level of education are provided on the highest level of education completed, classified according to the International Standard Classification of Education (ISCED). Data may have been regrouped from national classifications, which may not be strictly compatible with ISCED. For more information, refer to the Education and Mismatch Indicators (EMI) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The labour force participation rate is the labour force as a percent of the working-age population. The labour force is the sum of all persons of working age who are employed and those who are unemployed. For more information, refer to the Rural and Urban Labour Market Statistics (RURBAN) database description.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Long term government bond yields are calculated as monthly averages (non seasonally adjusted data). They refer to central government bond yields on the secondary market, gross of tax, with a residual maturity of around 10 years. The bond or the bonds of the basket have to be replaced regularly to avoid any maturity drift. This definition is used in the convergence criteria of the Economic and Monetary Union for long-term interest rates, as required under Article 121 of the Treaty of Amsterdam and the Protocol on the convergence criteria. Data are presented in raw form. Source: European Central Bank (ECB)

The focus of this domain is on enlargement countries, in other words the following country groups:candidate countries — Albania (AL), the former Yugoslav Republic of Macedonia (MK), Montenegro (ME), Iceland (IS), Serbia (RS) and Turkey (TR)potential candidates — Bosnia and Herzegovina (BA), as well as Kosovo (XK) (*) An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. (*) This designation is without prejudice to positions on status and is in line with UNSCR 1244 and the ICJ Opinion on the Kosovo declaration of independence.

The data in this table include foreign holdings of U.S. Treasury marketable and non-marketable bills, bonds, and notes reported monthly under the Treasury International Capital (TIC) reporting system. The data are collected primarily from U.S.-based custodians. Since U.S. securities held in overseas custody accounts may not be attributed to the actual owners, the data may not provide a precise accounting of individual country ownership of Treasury securities (see TIC FAQ #7 at: http://www.treasury.gov/resource-center/data-chart-center/tic/Pages/ticfaq1.aspx). -- Data for December 2011 and later include holdings of U.S. Treasury bonds and notes as reported on TIC Form SLT, "Aggregate Holdings of Long-Term Securities by U.S. and Foreign Residents.", including preliminary SLT data for the most recent month on the MFH table. -- The data before December 2011 were collected primarily from U.S.-based custodians and broker-dealers. Those data includes estimated foreign holdings of U.S. Treasury bonds and notes based on adding monthly net transactions from the TIC S Form to the holdings in the most recent annual Survey of Foreign Holdings of U.S. Securities. See footnotes 16 and 17 for details about the transition period during the 3rd and 4th quarter of 2011.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. Data disaggregated by economic activity are provided according to the latest version of the International Standard Industrial Classification of All Economic Activities (ISIC) available for that year. Data may have been regrouped from national classifications, which may not be strictly compatible with ISIC. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. Data on hours of work are presented, whenever possible, on the basis of the average number of hours of work per week, and with reference to hours worked in the main (paid) job regardless of working time arrangements (e.g. full-time and part-time). Data disaggregated by economic activity are provided according to the latest version of the International Standard Industrial Classification of All Economic Activities (ISIC) available for that year. Data may have been regrouped from national classifications, which may not be strictly compatible with ISIC. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. Data on hours of work are presented, whenever possible, on the basis of the average number of hours of work per week, and with reference to hours worked in the main (paid) job regardless of working time arrangements (e.g. full-time and part-time). Data disaggregated by occupation are provided according to the latest version of the International Standard Classification of Occupations (ISCO). Data may have been regrouped from the national classifications, which may not be strictly compatible with ISCO. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. Data on hours of work are presented, whenever possible, on the basis of the average number of hours of work per week, and with reference to hours worked in the main (paid) job regardless of working time arrangements (e.g. full-time and part-time). Data disaggregated by economic activity are provided according to the latest version of the International Standard Industrial Classification of All Economic Activities (ISIC) available for that year. Data may have been regrouped from national classifications, which may not be strictly compatible with ISIC. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. Data on hours of work are presented, whenever possible, on the basis of the average number of hours of work per week, and with reference to hours worked in the main (paid) job regardless of working time arrangements (e.g. full-time and part-time). Data disaggregated by occupation are provided according to the latest version of the International Standard Classification of Occupations (ISCO). Data may have been regrouped from the national classifications, which may not be strictly compatible with ISCO. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements.Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics <

International trade in goods statistics are an important data source for many public and private sector decision-makers at international, European Union and national level. For example, at the European Union level, international trade data are extensively used for multilateral and bilateral negotiations within the framework of the common commercial policy, to define and implement anti-dumping policy, to evaluate the progress of the Single Market and many other policies. Moreover, they constitute an essential source for the compilation of balance of payments statistics and national accounts. International trade in goods statistics cover both extra- and intra-EU trade: Extra-EU trade statistics cover the trading of goods between Member States and a non-member countries. Intra-EU trade statistics cover the trading of goods between Member States. "Goods" means all movable property including electricity. Detailed and aggregated data are published for the Euro area, the European Union and for each Member State separately. Main components: Data record the monthly trade between Member States in terms of arrivals and dispatches of goods as well as the monthly trade in terms of imports and exports between Member States and non-member countries. However, in publications only the term “exports” for all outward flows and “imports” for all inward flows are applied for both intra-EU trade and extra-EU trade. Extra-EU trade imports and exports are recorded in the Member State where the goods are placed under the customs procedures. Extra-EU trade statistics do not record goods in transit, goods placed into customs warehouses or goods for temporary admission. Data sources: The statistical information is mainly provided by the traders on the basis of Customs (extra-EU) and Intrastat (intra-EU) declarations. Data are collected by the competent national authorities of the Member States and compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Classification systems: - Product classification: For detailed data, products are disseminated according to the Combined Nomenclature (CN8), which first six digit codes coincide with the Harmonized Commodity Description and Coding System (HS), products are disseminated as well according to the Standard International Trade Classification (SITC) and the Broad Economic Categories (BEC). - Country classification: The Geonomenclature is used for classifying reporting countries and trading partners. Nomenclatures and correspondence tables are available at the Eurostat’s classification server RAMON. The following basic information is provided by Eurostat: - reporting country, - reference period, - trade flow, - product, - trading partner - mode of transport. Detailed data are disseminated according to the Combined Nomenclature (HS2, HS4, HS6 and CN8 levels) for the following indicators: - trade value (in Euro), - trade quantity in 100 kg, - trade quantity in supplementary units (published for some goods according to the Combined Nomenclature). Aggregated data cover both short and long term indicators. Short term indicators are disseminated according to major SITC and BEC groups for the following indicators: - gross and seasonally adjusted trade value (in million Euro), - unit-value indices, - gross and seasonally adjusted volume indices, - growth rates of trade values and indices. Long term indicators are disseminated according to major SITC groups for the following indicators: - trade value (in billion Euro), - shares of Member States in EU and world trade, - shares of main trading partners in EU trade, - volume indices. Adjustments are applied by the Member States to compensate the impact of exemption thresholds, which release the information providers from statistical formalities, as well as, to take into account the late or not response of the providers. In addition, Eurostat applies seasonal adjustments to aggregated time series.

International trade in goods statistics (ITGS) published by Eurostat measure the value and quantity of goods traded between the EU Member States (intra-EU trade) and goods traded by the EU Member States with non-EU countries (extra-EU trade). ‘Goods’ means all movable property including electricity. ‘European’ means that the statistics are compiled on the basis of the concepts and definitions set out in EU legislation. ‘National’ statistics, i.e. statistics published at national level by the Member States, are compiled on the basis of national rules which may differ from EU rules. European ITGS are the official harmonised source of information about exports, imports and the trade balances of the EU, its Member States and the euro area.   Type of users and requirements As international trade forms a major part of the world economy, statistics on trade in goods are an instrument of primary importance for numerous public and private sector decision makers. For example, international trade statistics • enable EU authorities to prepare multilateral and bilateral negotiations under the common commercial policy; • enable EU authorities to evaluate the progress of the Single Market and the integration of EU economies; • enable EU authorities to define and implement anti-dumping policies; • constitute an essential source of information for balance of payments statistics, national accounts and economic studies; and • help EU businesses conduct market research and define their commercial strategy. Statistics satisfy these needs in a variety of ways. Users may need either annual aggregated or detailed monthly data on products or partner countries. They may be interested in trade values in current prices or at constant prices. Alternatively, their interest may be in quantities rather than in values. These examples, which are far from exhaustive, show the diversity of users and their requirements. Eurostat tries to meet these various needs and to adapt to a changing environment, such as changes due to globalisation.   Extrastat and Intrastat: two data collection systems Traditionally ITGS are based on the data collected by customs authorities on trade transactions between countries. Customs declarations are used for statistical purposes as the basic data source which provides detailed information on exports and imports of goods with a geographical breakdown. The first piece of EU legislation on ITGS was adopted in 1975; it provided general guidelines on data collection and obliged Member States to send their data to Eurostat. The advent of the Single Market on 1 January 1993, with its removal of customs formalities between Member States and subsequent loss of trade statistics data sources, required the establishment of a new data collection system: Intrastat.. Since then ITGS are based on two data collection systems: Extrastat and Intrastat. Extrastat data on trade in goods with non-EU countries are collected by customs authorities and are based on the records of trade transactions in customs declarations, whereas Intrastat data are directly collected from intra-EU trade operators once a month. Alternative data sources may be used for some specific goods and movements like for among with ships, aircraft, gas and electricity.   Aggregated versus detailed data International trade in goods statistics are published through different datasets grouped into two categories:Aggregated data which refer to macroeconomic indicators for the EU and euro area. Data are aggregated by broad product categories, both monthly (short-term indicators) and annually (long-term indicators). Broad product categories are defined as one-digit codes of the Standard International Trade Classification (SITC) or aggregates of the Broad Economic Categories (BEC); andDetailed data which refer to the most detailed level of the following product nomenclatures: the Combined Nomenclature (CN), the SITC, the BEC, the Classification of Products by Activity (CPA) and the Standard Goods Classification for Transport Statistics/Revised (NSTR). Detailed data also contain aggregations at higher levels.   Statistical dimensions The frequency at which the data are compiled (data periodicity) and the product nomenclature differ depending on the dataset, but the following statistical fields are always available:reporting country: country or geo-economic area such as EU or euro area;reference period: month and/or year;trade flows: import and export;product according to the relevant classification; andpartner country: EU Member State, non-EU country or geo-economic area. Besides the dimensions listed above, specific datasets contain information on the mode of transport (e.g. by sea, by air or by road) or the statistical procedure (normal trade versus trade for processing activities).

Australia's international merchandise trade statistics record goods which add to or subtract from the stock of material resources of Australia by entering (imports) or leaving (exports) its territory. Goods simply transported through Australia (goods in transit), or temporarily admitted or withdrawn, do not add to or subtract from Australia's stock of material resources and are not included in Australia's international merchandise trade statistics.

Australia's international merchandise trade statistics record goods which add to or subtract from the stock of material resources of Australia by entering (imports) or leaving (exports) its territory. Goods simply transported through Australia (goods in transit), or temporarily admitted or withdrawn, do not add to or subtract from Australia's stock of material resources and are not included in Australia's international merchandise trade statistics.

Merchandise Trade values & Merchandise trade - indices and prices

Migration and Remittances Fact book provides a snapshot of migration and remittances for all countries, regions and income groups of the world, compiled from available data from various sources.

Data reported on a monthly basis by Member States and Schengen Associated Countries on detections of illegal border-crossing on entry between BCPs of the external borders of the Member States of the EU and Schengen Associated Countries, and aggregated by routes.

Data for broadband (except for broadband coverage), mobile telephony and financial indicators have been collected by the European Commission (DG CNECT) from responsible national authorities (national regulatory authorities or ministries). Questionnaires are sent annually or bi-annually (broadband data). The source for fixed telephony data is the International Telecommunication Union (ITU). Data are collected annually. There is no fixed release calendar. Data are usually released annually. The collection of 'Telecommunication Services' statistics presents the following main categories of characteristics: Fixed broadbandcoveragesubscriptions and penetrationsubscriptions by speedmarket share   Mobile broadbandcoveragesubscriptions  (not available until reference year 2013) and penetrationmarket share  (not available until reference year 2013)   Fixed telephonymain telephone lines   Mobile communicationssubscriptions and penetrationmarket sharerevenues   Telecommunications sectorrevenuesinvestments

The Monetary and Financial Statistics (MFS) database contains the aggregated surveys covering: i) Central Bank ii) Depository Corporations and iii) Other Financial Corporations. The key macroeconomic aggregates in this dataset include: i) Monetary base and broad money; ii) Credit aggregates (including credit to the private sector); and iii) Foreign assets and liabilities.   Beginning in 2009, there are two presentations of Monetary Statistics in IFS. The new presentation data follows the Monetary and Financial Statistics Manual (MFSM) and the Monetary and Financial Statistics Compilation Guide (MFSCG), a companion to the MFSM that contains more detailed coverage of the classification, economic sectorization, valuation, and recording of financial assets and liabilities in an economy. The MFSCG gives prominence to the source data for monetary and financial statistics.   The majority of countries use the standardized report forms (SRFs) to report monetary data to the IMF and are presented under SRF Countries.   The old presentation is used for those countries that do not use the SRFs for reporting Monetary data and presented under Non-SRF Countries. The presentation of these countries will be changed to the new presentation when the countries implement the reporting of SRF-based data.   The Monetary and Financial Statistics Manual and Compilation Guide (Manual) updates and merges into one volume methodological and practical aspects of the compilation process for monetary and financial statistics (MFS). Aimed at compilers and users of MFS, it offers a conceptual framework for the collection, compilation, and analytical presentation of monetary data, which provide a critical input for monetary policy formulation and monitoring.   Detailed monetary statistics based on the standardized report forms reflecting the conceptual framework of the above Manual and its predecessors.

Day-to-day money market interest rates: averages for the euro area (EONIA= Euro OverNight Index Average), EU27 (theoretical aggregate), and national series (TR, US, JP). 1-month, 3-month, 6-month and 12-month interest rates: averages for the euro area (EURIBOR) and EU27 (theoretical aggregate). 3-month interest rates are also available for the US and Japan.

Value of imports and exports by BEC (Broad Economic Categories), country, imports and exports and time

Value of exports by SHORT-TERM (industrial origin), country, imports and exports and time

The Air transport domain contains national and international intra and extra-EU data. This provides air transport data for passengers (in number of passengers) and for freight and mail (in 1 000 tonnes) as well as air traffic data by airports, airlines and aircraft. Data are transmitted to Eurostat by the Member States of the European Union as well as the Candidate Countries, Iceland, Norway and Switzerland. The air transport data have been calculated using data collected at airport level. The data are presented in four sub-domains: Air Transport measurement - PassengersAir Transport measurement - Freight and mailAir Transport measurement - Traffic data by airports, aircraft and airlinesAir Transport measurement - Data aggregated at standard regional levels (NUTS). The two first domains contain several data collections: Overview of the air transport by country and airport,National air transport by country and airport,International intra-EU air transport by country and airport,International extra-EU air transport by country and airport,Detailed air transport by reporting country and routes. In the tables of the sub-domain "Transport measurement - Passengers", data are broken down by passengers on board (arrivals, departures and total), passengers carried (arrivals, departures and total) and passenger commercial air flights (arrival, departures and total). Additionally, the tables of collection "Detailed air transport by reporting country and routes" provide data on seats available (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Freight and mail", data are broken down by freight and mail on board (arrival, departures and total), freight and mail loaded/unloaded (loaded, unloaded and total) and all-freight and mail commercial air flights (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Traffic by airports, aircraft and airlines": - Data by type of aircraft are broken down by total passengers on board, total freight and mail on board in tonnes, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by type of airline are broken down by total passengers on board, total passengers carried, total freight and mail on board, total freight and mail loaded/unloaded, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by airport are broken down by total passengers carried, total transit passengers, total freight and mail loaded/unloaded, total commercial aircraft movements, total aircraft movements. The data is presented at monthly, quarterly and annual level. The sub-domain "Transport measurement - Data aggregated at standard regional levels (NUTS)", contains two tables: Air transport of passengers at regional levelAir transport of freight at regional level The tables present the evolution of the number of passengers carried (if not available passengers on board) and the volume of freight and mail loaded or unloaded (if not available freight and mail on board) to/from the NUTS regions (level 2, 1 and 0) since 1999. The data is presented at annual level. The air transport regional data have been calculated using data collected at the airport level in the frame of the regulatory data collection on air transport. More information can be found in Regional transport statistics metadata file.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. This indicator shows the percentage change of the CPI between two consecutive periods. Data are disaggregated by the Classification of Individual Consumption According to Purpose (COICOP). For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

The Air transport domain contains national and international intra and extra-EU data. This provides air transport data for passengers (in number of passengers) and for freight and mail (in 1 000 tonnes) as well as air traffic data by airports, airlines and aircraft. Data are transmitted to Eurostat by the Member States of the European Union as well as the Candidate Countries, Iceland, Norway and Switzerland. The air transport data have been calculated using data collected at airport level. The data are presented in four sub-domains: Air Transport measurement - PassengersAir Transport measurement - Freight and mailAir Transport measurement - Traffic data by airports, aircraft and airlinesAir Transport measurement - Data aggregated at standard regional levels (NUTS). The two first domains contain several data collections: Overview of the air transport by country and airport,National air transport by country and airport,International intra-EU air transport by country and airport,International extra-EU air transport by country and airport,Detailed air transport by reporting country and routes. In the tables of the sub-domain "Transport measurement - Passengers", data are broken down by passengers on board (arrivals, departures and total), passengers carried (arrivals, departures and total) and passenger commercial air flights (arrival, departures and total). Additionally, the tables of collection "Detailed air transport by reporting country and routes" provide data on seats available (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Freight and mail", data are broken down by freight and mail on board (arrival, departures and total), freight and mail loaded/unloaded (loaded, unloaded and total) and all-freight and mail commercial air flights (arrival, departures and total). The data is presented at monthly, quarterly and annual level. In the tables of the sub-domain "Transport measurement - Traffic by airports, aircraft and airlines": - Data by type of aircraft are broken down by total passengers on board, total freight and mail on board in tonnes, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by type of airline are broken down by total passengers on board, total passengers carried, total freight and mail on board, total freight and mail loaded/unloaded, total passengers seats available, total commercial air flights (passengers + all-freight and mail), passenger commercial air flights, all-freight and mail commercial air flights. The data is presented at annual level since 2003. - Data by airport are broken down by total passengers carried, total transit passengers, total freight and mail loaded/unloaded, total commercial aircraft movements, total aircraft movements. The data is presented at monthly, quarterly and annual level. The sub-domain "Transport measurement - Data aggregated at standard regional levels (NUTS)", contains two tables: Air transport of passengers at regional levelAir transport of freight at regional level The tables present the evolution of the number of passengers carried (if not available passengers on board) and the volume of freight and mail loaded or unloaded (if not available freight and mail on board) to/from the NUTS regions (level 2, 1 and 0) since 1999. The data is presented at annual level. The air transport regional data have been calculated using data collected at the airport level in the frame of the regulatory data collection on air transport. More information can be found in Regional transport statistics metadata file.

Accommodation statistics are a key part of the system of tourism statistics in the EU and have a long history of data collection. Annex I of the Regulation (EU) 692/2011 of the European Parliament and of the Council deals with accommodation statistics and includes 4 sections focusing on accommodation statistics of which sections 1 and 2 include the requirements concerning rented accommodation (capacity and occupancy respectively). Data are collected by the competent national authorities of the Member States and are compiled according to a harmonised methodology established by EU regulations before transmission to Eurostat. Most of the time, data are collected via sample or census surveys. However, in a few cases data are compiled from a demand-side perspective (i.e. via visitor surveys or border surveys). Surveys on the occupancy of accommodation establishments are generally conducted on a monthly basis. The concepts and definitions used in the collection of data shall conform to the specifications described in the Methodological manual for tourism statistics. Accommodation statistics comprise the following information: Monthly data on tourism industries (NACE 55.1, 55.2 and 55.3) Monthly occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Net occupancy rate of bed-places and bedrooms in hotels and similar accommodation Annual data on tourism industries(NACE 55.1, 55.2 and 55.3) Occupancy of tourist accommodation establishments: arrivals and nights spent by residents and non-residents Capacity of tourist accommodation establishments: number of establishments, bedrooms and bed places Regional data  Annual occupancy (arrivals and nights spent by residents and non-residents) of tourist accommodation establishments at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Annual data on number of establishments, bedrooms and bed places at NUTS 2 level, by degree of urbanisation and by coastal/non-coastal area Data on number of establishments, bedrooms and bed places are available by activity at NUTS 3 level until 2011. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

A night spent is each night a guest / tourist (resident or non-resident) actually spends (sleeps or stays) or is registered (his/her physical presence there being unnecessary) in a tourist accommodation establishment.

Eurostat Dataset Id:tour_occ_ninrmw National data Monthly and annual data on arrivals, nights spent and occupancy rates at tourist accommodation establishments. Regional data Annual arrivals, nights spent at tourist accommodation establishments at NUTS 2 level. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

The monthly oil stocks collection covers the supply of crude oil and petroleum products to the Community. It covers stocks in the following locations: refinery tanks, bulk terminals, pipeline tankage, barges and intercostal tankers (when port of departure and destination are in the same country), tankers in a port of a member country (if their cargo is to be discharged at the port), inland ship bunkers. Exclude military stocks, stocks held in pipelines, in rail tanks cars, in truck tanks cars, in sea-going ships' bunkers, in service stations, in retail stores and in tankers at sea. Two main types of stockholding obligations are existing: •           Emergency stocks, where all Member States are obliged to keep a certain volume of crude oil and petroleum products, based on the annual level of net imports or the annual level of consumption (specifically for producers). •           Specific stocks, where Member States may undertake a commitment to maintain a certain volume of petroleum products, owned by the Government or the Central Stockholding Entity. Monthly oil stocks data collection covers the full spectrum of the 28 Member States of the European Union, from 2013 onwards.   

A night spent is each night a guest/tourist (resident or non-resident) actually spends (sleeps or stays) or is registered (his/her physical presence there being unnecessary) in a tourist accommodation establishment.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. Persons outside the labour force comprise all persons of working age who, during the specified reference period, were not in the labour force (that is, were not employed or unemployed). For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. Persons outside the labour force comprise all persons of working age who, during the specified reference period, were not in the labour force (that is, were not employed or unemployed). Data disaggregated by level of education are provided on the highest level of education completed, classified according to the International Standard Classification of Education (ISCED). Data may have been regrouped from national classifications, which may not be strictly compatible with ISCED. For more information, refer to the Education and Mismatch Indicators (EMI) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. Persons outside the labour force comprise all persons of working age who, during the specified reference period, were not in the labour force (that is, were not employed or unemployed). For more information, refer to the Rural and Urban Labour Market Statistics (RURBAN) database description.

Persons subject of asylum applications pending at the end of the month. Asylum applicant means a person having submitted an application for international protection or having been included in such application as a family member during the reference period.

Data series on asylum applications contain statistical information based on Article 4 of the Council Regulation (EC) No 862/2007 with reference to:Asylum and first time asylum applicants by age, sex and citizenshipPersons subject to applications pending at the end of reference period by age, sex and citizenshipApplications for asylum withdrawn by age, sex and citizenshipAsylum applicants considered to be unaccompanied minors by age, sex and citizenship These data are supplied to Eurostat by the national Ministries of Interior and related official agencies. Data is presented by country and for groups of countries: the European Union (EU28, EU27) and the European Free Trade Association (EFTA). Data has been rounded to the nearest 5.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The potential labour force refers to persons not in employment who express an interest in this form of work but for whom existing conditions limit their active job search and/or their availability. This group is used to calculate alternative measures of labour underutilization. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements.Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics <

The EU Agricultural Price Indices (output and input) comprise:the index of producer prices of agricultural products;the index of purchase prices of the means of agricultural production. The purpose of the price indices is to provide information on trends in producer prices of agricultural products and purchase prices of the means of agricultural production. They are intended to permit a comparison of these trends both between the various Member States and the European Union as a whole and between the different products within a Member State or the European Union. They are also intended to facilitate comparisons between trends in producer prices and trends in purchase prices of the means of agricultural production. They cannot, however, express differences between the Member States in terms of absolute agricultural price levels The following points should be borne in mind when interpreting the EU Agricultural Price Indices:As regards spatial comparisons, the structures of the weights with respect to products and means of production reflect the value of the sales and purchases in each country during the base year. The weights therefore differ from one country to another and this obviously has an effect on trends in the aggregate indices.In comparing the trends in output prices with those in input prices, the field of observation of the latter does not cover, as will be seen later, the whole of the operating expenditure of the agricultural sector.The comparison between quarterly price indices can be made only between the corresponding quarters of different years. The reason is the variation of the weights from quarter to quarter for the output products. In the majority of Member States, national indices of agricultural prices may differ from the EU Agricultural Price Indices in respect of their base, formula or field of observation.

The EU Agricultural Price Indices (output and input) comprise:the index of producer prices of agricultural products;the index of purchase prices of the means of agricultural production. The purpose of the price indices is to provide information on trends in producer prices of agricultural products and purchase prices of the means of agricultural production. They are intended to permit a comparison of these trends both between the various Member States and the European Union as a whole and between the different products within a Member State or the European Union. They are also intended to facilitate comparisons between trends in producer prices and trends in purchase prices of the means of agricultural production. They cannot, however, express differences between the Member States in terms of absolute agricultural price levels The following points should be borne in mind when interpreting the EU Agricultural Price Indices:As regards spatial comparisons, the structures of the weights with respect to products and means of production reflect the value of the sales and purchases in each country during the base year. The weights therefore differ from one country to another and this obviously has an effect on trends in the aggregate indices.In comparing the trends in output prices with those in input prices, the field of observation of the latter does not cover, as will be seen later, the whole of the operating expenditure of the agricultural sector.The comparison between quarterly price indices can be made only between the corresponding quarters of different years. The reason is the variation of the weights from quarter to quarter for the output products. In the majority of Member States, national indices of agricultural prices may differ from the EU Agricultural Price Indices in respect of their base, formula or field of observation.

Data cited at: The African Development Bank: Producer food prices in African countries: https://dataportal.opendataforafrica.org/syyplpc

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

The production in construction shows the output and activity of the construction sector. It measures changes in the volume of output on a monthly basis. Construction includes building construction and civil engineering. The construction sector in total corresponds to the NACE Rev. 2 section F but the split between building construction and civil engineering is based on the Classification of types of Construction (CC1, CC2). Production in construction is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms: UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesCONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesWHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesSERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

The industrial production index shows the output and activity of the industry sector. It measures changes in the volume of output on a monthly basis. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial production is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The industrial production index shows the output and activity of the industry sector. It measures changes in the volume of output on a monthly basis. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial production is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The industrial production index shows the output and activity of the industry sector. It measures changes in the volume of output on a monthly basis. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial production is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The industrial production index shows the output and activity of the industry sector. It measures changes in the volume of output on a monthly basis. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial production is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The industrial production index shows the output and activity of the industry sector. It measures changes in the volume of output on a monthly basis. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial production is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The industrial production index shows the output and activity of the industry sector. It measures changes in the volume of output on a monthly basis. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial production is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Constructions (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Producer (output) prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

The industrial production index shows the output and activity of the industry sector. It measures changes in the volume of output on a monthly basis. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Industrial production is compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

Short-term statistics (STS) give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are generally presented in the following forms:UnadjustedCalendar adjustedSeasonally adjusted Depending on the STS regulation data are accessible as monthly, quarterly and annual data. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringBuilding permits indicators*: Number of dwellings, Square meters of useful floor (or alternative size measure)Construction costs or prices: Construction costs, Material costs, Labour costs (if not available, they may be approximated by the Output prices variable)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (value)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries SERVICESTurnover (in value)*Labour input indicators: Number of persons employed, Hours worked, Gross wages and salariesProducer prices (Output prices )* National reference metadata of the reporting countries can be found in the Annexes of this metadata file.

This indicator covers the carcass weight of bovine animals (calves, bullocks, bulls, heifers and cows) slaughtered in slaughterhouses and on the farm, whose meat is declared fit for human consumption.

This indicator expresses the total carcass weight of pigs slaughtered in slaughterhouses and on the farm, whose meat is declared fit for human consumption.

Total carcass weight of poultry slaughtered whose meat is declared fit for human consumption. The following poultry is included: hens, chicken, ducks, turkey, guinea fowls, geese. This indicator covers mainly the production of gallinaceae including broilers.

This indicator covers the carcass weight of sheep, including lambs, and goats slaughtered in slaughterhouses or elsewhere whose meat is declared fit for human consumption.

The absolute prices on agricultural products show prices on main agricultural outputs and inputs. Since 2006 only annual prices has been collected. Before the statistics also includes monthly prices. Whilst the purpose of agricultural price indices is to reveal trends in the prices of individual agricultural products or product groups, the purpose of the Statistics of Absolute Agricultural Prices is ‑ above all ‑ a dual one: they are used for (1) comparisons between Member States and (2) for economic analyses. Absolute agricultural prices (especially aggregated prices) are needed for many model calculations and for the determination of price elasticities. This means that two objectives have to be met. The first one is that absolute prices be comparable between Member States. The second one is that the products for which the prices are to be recorded be of economic relevance for the respective Member State. These objectives are not necessarily compatible and some compromise may be necessary. Although much progress has already been made in the harmonisation of the time series across Member States, caution must still be exercised when comparing the actual agricultural prices among Member States. Differences in the prices can still reflect methodological differences (for example different form of commercialisation of the product concerned) and not factual differences in every case in the prices themselves. Hence, the user of the data should always refer to the description of the data as provided by the target definition The agricultural prices expressed in national currency are converted into Euro (ECU until 31.12.1998) in order to allow comparisons between Member States.

Data cited at:The Global Economy Under licence of Creative Commons Attribution-NonCommercial-NoDerivs 3.0 Unported    

Eurostat collects rail transport statistics by two means: 1. Voluntary data collection. Data are collected using the Common Questionnaire of the United Nations Economic Commission for Europe (UNECE), Eurostat and the International Transport Forum (ITF). Full details are set out in another document (see link to 21.3. Annex, at the bottom of the page). The following Eurostat dissemination tables are based on this data collection: all tables in subsection: Railway transport infrastructure (rail_if)all tables in subsection: Railway transport equipment (rail_eq)all tables in subsection: Railway transport - enterprises, economic performance and employment (rail_ec)all tables in subsection: Railway traffic (rail_tf) but table Train movements (rail_tf_trainmv)table Railway transport - Number of victims by type of injury (rail_ac_inj) in subsection Railway transport - Accidents (rail_ac)  Additionally, one table in the regional transport section is based on a different voluntary data collection (REGWeb questionnaire) and contains information on railway infrastructure (length of railway lines - total, electrified and with double or more tracks) by NUTS 2 regions. 2. Mandatory data collection based on the legal act. Data collection on goods and passenger transport, and on rail accidents is based on Regulation EC 91/2003 from the beginning of 2003. The freight data from 1982 until 2002 are based on Directive 80/1177/EEC. Compared to the Directive, Regulation 91/2003 covers the transport of passengers and statistics on accidents in addition to the transport of goods. A detailed description of the source of each dissemination table can be found in the section 21.3Annex (Legal acts and corresponding dissemination tables) at the bottom of this page.

Eurostat collects rail transport statistics by two means: 1. Voluntary data collection. Data are collected using the Common Questionnaire of the United Nations Economic Commission for Europe (UNECE), Eurostat and the International Transport Forum (ITF). Full details are set out in another document (see link to 21.3. Annex, at the bottom of the page). The following Eurostat dissemination tables are based on this data collection: all tables in subsection: Railway transport infrastructure (rail_if)all tables in subsection: Railway transport equipment (rail_eq)all tables in subsection: Railway transport - enterprises, economic performance and employment (rail_ec)all tables in subsection: Railway traffic (rail_tf) but table Train movements (rail_tf_trainmv)table Railway transport - Number of victims by type of injury (rail_ac_inj) in subsection Railway transport - Accidents (rail_ac)  Additionally, one table in the regional transport section is based on a different voluntary data collection (REGWeb questionnaire) and contains information on railway infrastructure (length of railway lines - total, electrified and with double or more tracks) by NUTS 2 regions. 2. Mandatory data collection based on the legal act. Data collection on goods and passenger transport, and on rail accidents is based on Regulation EC 91/2003 from the beginning of 2003. The freight data from 1982 until 2002 are based on Directive 80/1177/EEC. Compared to the Directive, Regulation 91/2003 covers the transport of passengers and statistics on accidents in addition to the transport of goods. A detailed description of the source of each dissemination table can be found in the section 21.3Annex (Legal acts and corresponding dissemination tables) at the bottom of this page.

Eurostat collects rail transport statistics by two means: 1. Voluntary data collection. Data are collected using the Common Questionnaire of the United Nations Economic Commission for Europe (UNECE), Eurostat and the International Transport Forum (ITF). Full details are set out in another document (see link to 21.3. Annex, at the bottom of the page). The following Eurostat dissemination tables are based on this data collection:all tables in subsection: Railway transport infrastructure (rail_if)all tables in subsection: Railway transport equipment (rail_eq)all tables in subsection: Railway transport - enterprises, economic performance and employment (rail_ec)all tables in subsection: Railway traffic (rail_tf) but table Train movements (rail_tf_trainmv)table Railway transport - Number of victims by type of injury (rail_ac_inj) in subsection Railway transport - Accidents (rail_ac)  Additionally, one table in the regional transport section is based on a different voluntary data collection (REGWeb questionnaire) and contains information on railway infrastructure (length of railway lines - total, electrified and with double or more tracks) by NUTS 2 regions. 2. Mandatory data collection based on the legal act. Data collection on goods and passenger transport, and on rail accidents is based on Regulation EC 91/2003 from the beginning of 2003. The freight data from 1982 until 2002 are based on Directive 80/1177/EEC. Compared to the Directive, Regulation 91/2003 covers the transport of passengers and statistics on accidents in addition to the transport of goods. A detailed description of the source of each dissemination table can be found in the section 21.3Annex (Legal acts and corresponding dissemination tables) at the bottom of this page.

The REER (or Relative price and cost indicators) aim to assess a country's (or currency area's) price or cost competitiveness relative to its principal competitors in international markets. Changes in cost and price competitiveness depend not only on exchange rate movements but also on cost and price trends. The indicator is deflated by the price index (total economy) against a panel of 42 countries (= EU27+ 15 other industrial countries: Australia, Canada, United States, Japan, Norway, New Zealand, Mexico, Switzerland, UK, Turkey, Russia, China, Brazil, South Korea and Hong Kong). Double export weights are used to calculate REERs, reflecting not only competition in the home markets of the various competitors, but also competition in export markets elsewhere. A rise in the index means a loss of competitiveness. Data source: Directorate General for Economic and Financial Affairs (DG ECFIN). Data are non-seasonal adjusted.

Data cited at: Refugee Processing Center   FY - Fiscal Years have been used (since October until September). Data for 2017 include the last available values.  The Refugee Processing Center (RPC) is operated by the U.S Department of State (DOS) Bureau of Population, Refugees, and Migration (PRM) in the Rosslyn section of Arlington, Virginia USA.  At the RPC and at Resettlement Support Centers (RSCs), an interactive computer system called the Worldwide Refugee Admissions Processing System (WRAPS) is used to process and track the movement of refugees from various countries around the world to the U.S. for resettlement under the U.S. Refugee Admissions Program (USRAP). Fiscal years 2008 through 2019 as of june 30,2019. . Fiscal Years 2008 through 2019 as of june 30,2019. >> Annual data is Fiscal year data and October is the year starting 

Eurostat Dataset Id:ei_bsrt_m_r2 Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published:as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

Eurostat Dataset Id:ei_bsrt_m Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published:as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

Eurostat Dataset Id:ei_bsrt_m_bc Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published: as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

Industry, Trade and Services statistics are part of Short-term statistics (STS), they give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are presented in the following forms: UnadjustedCalendar adjustedSeasonally-adjusted Depending on the STS regulation, data are accessible monthly and quarterly. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringLabour input indicators: Number of Persons Employed, Hours Worked, Gross Wages and SalariesConstruction costs IndexBuilding permits indicators*: Number of dwellings WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (in value)Labour input indicators: Number of Persons Employed SERVICES Turnover (in value)*Producer prices (Ouput prices)*

Industry, Trade and Services statistics are part of Short-term statistics (STS), they give information on a wide range of economic activities according to NACE Rev.2 classification (Statistical Classification of Economic Activities in the European Community). The industrial import price indices offer information according to the CPA classification (Statistical Classification of Products by Activity in the European Economic Community). Construction indices are broken down by Classification of Types of Construction (CC). All data under this heading are index data. Percentage changes are also available for each indicator. The index data are presented in the following forms: UnadjustedCalendar adjustedSeasonally-adjusted Depending on the STS regulation, data are accessible monthly and quarterly. This heading covers the indicators listed below in four different sectors. Based on the national data, Eurostat compiles EU and euro area infra-annual economic statistics. Among these, a list of indicators, called Principal European Economic Indicators (PEEIs) has been identified by key users as being of prime importance for the conduct of monetary and economic policy of the euro area. These indicators are mainly released through Eurostat's website under the heading Euro-indicators. There are eight PEEIs contributed by STS and they are marked with * in the text below. INDUSTRYProduction (volume)*Turnover: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic turnover into euro area and non euro area is available for the euro area countriesProducer prices (output prices)*: Total, Domestic market and Non-domestic market==> A further breakdown of the non-domestic producer prices into euro area and non euro area is available for the euro area countriesImport prices*: Total, Euro area market, Non euro area market (euro area countries only)Labour input indicators: Number of persons employed, Hours worked, Gross wages and salaries CONSTRUCTIONProduction (volume)*: Total of the construction sector, Building construction, Civil EngineeringLabour input indicators: Number of Persons Employed, Hours Worked, Gross Wages and SalariesConstruction costs IndexBuilding permits indicators*: Number of dwellings WHOLESALE AND RETAIL TRADEVolume of sales (deflated turnover)*Turnover (in value)Labour input indicators: Number of Persons Employed SERVICES Turnover (in value)*Producer prices (Ouput prices)*

The Retail Trade Index is a business cycle indicator which shows the monthly activity of the retail sector in value and volume. It is a short-term indicator for final domestic demand. It should be noted that the volume of sales is different from the volume of (retail) trade services. The latter takes account of changes in the quality of the trade service supplied. As such the volume of sales is conceptually different from the index of production which takes account of quality changes. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Turnover for retail trade are compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The Retail Trade Index is a business cycle indicator which shows the monthly activity of the retail sector in value and volume. It is a short-term indicator for final domestic demand. It should be noted that the volume of sales is different from the volume of (retail) trade services. The latter takes account of changes in the quality of the trade service supplied. As such the volume of sales is conceptually different from the index of production which takes account of quality changes. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Turnover for retail trade are compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The Retail Trade Index is a business cycle indicator which shows the monthly activity of the retail sector in value and volume. It is a short-term indicator for final domestic demand. It should be noted that the volume of sales is different from the volume of (retail) trade services. The latter takes account of changes in the quality of the trade service supplied. As such the volume of sales is conceptually different from the index of production which takes account of quality changes. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Turnover for retail trade are compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The Retail Trade Index is a business cycle indicator which shows the monthly activity of the retail sector in value and volume. It is a short-term indicator for final domestic demand. It should be noted that the volume of sales is different from the volume of (retail) trade services. The latter takes account of changes in the quality of the trade service supplied. As such the volume of sales is conceptually different from the index of production which takes account of quality changes. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Turnover for retail trade are compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The Retail Trade Index is a business cycle indicator which shows the monthly activity of the retail sector in value and volume. It is a short-term indicator for final domestic demand. It should be noted that the volume of sales is different from the volume of (retail) trade services. The latter takes account of changes in the quality of the trade service supplied. As such the volume of sales is conceptually different from the index of production which takes account of quality changes. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Turnover for retail trade are compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The Retail Trade Index is a business cycle indicator which shows the monthly activity of the retail sector in value and volume. It is a short-term indicator for final domestic demand. It should be noted that the volume of sales is different from the volume of (retail) trade services. The latter takes account of changes in the quality of the trade service supplied. As such the volume of sales is conceptually different from the index of production which takes account of quality changes. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Turnover for retail trade are compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The Retail Trade Index is a business cycle indicator which shows the monthly activity of the retail sector in value and volume. It is a short-term indicator for final domestic demand. It should be noted that the volume of sales is different from the volume of (retail) trade services. The latter takes account of changes in the quality of the trade service supplied. As such the volume of sales is conceptually different from the index of production which takes account of quality changes. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Turnover for retail trade are compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The Retail Trade Index is a business cycle indicator which shows the monthly activity of the retail sector in value and volume. It is a short-term indicator for final domestic demand. It should be noted that the volume of sales is different from the volume of (retail) trade services. The latter takes account of changes in the quality of the trade service supplied. As such the volume of sales is conceptually different from the index of production which takes account of quality changes. Data are compiled according to the Statistical classification of economic activities in the European Community, (NACE Rev. 2, Eurostat). Turnover for retail trade are compiled as a "fixed base year Laspeyres type volume-index". The current base year is 2015 (Index 2015 = 100). The index is presented in calendar and seasonally adjusted form. Growth rates with respect to the previous month (M/M-1) are calculated from calendar and seasonally adjusted figures while growth rates with respect to the same month of the previous year (M/M-12) are calculated from calendar adjusted figures.

The absolute prices on agricultural products show prices on main agricultural outputs and inputs. Since 2006 only annual prices has been collected. Before the statistics also includes monthly prices. Whilst the purpose of agricultural price indices is to reveal trends in the prices of individual agricultural products or product groups, the purpose of the Statistics of Absolute Agricultural Prices is ‑ above all ‑ a dual one: they are used for (1) comparisons between Member States and (2) for economic analyses. Absolute agricultural prices (especially aggregated prices) are needed for many model calculations and for the determination of price elasticities. This means that two objectives have to be met. The first one is that absolute prices be comparable between Member States. The second one is that the products for which the prices are to be recorded be of economic relevance for the respective Member State. These objectives are not necessarily compatible and some compromise may be necessary. Although much progress has already been made in the harmonisation of the time series across Member States, caution must still be exercised when comparing the actual agricultural prices among Member States. Differences in the prices can still reflect methodological differences (for example different form of commercialisation of the product concerned) and not factual differences in every case in the prices themselves. Hence, the user of the data should always refer to the description of the data as provided by the target definition The agricultural prices expressed in national currency are converted into Euro (ECU until 31.12.1998) in order to allow comparisons between Member States.

The absolute prices on agricultural products show prices on main agricultural outputs and inputs. Since 2006 only annual prices has been collected. Before the statistics also includes monthly prices. Whilst the purpose of agricultural price indices is to reveal trends in the prices of individual agricultural products or product groups, the purpose of the Statistics of Absolute Agricultural Prices is ‑ above all ‑ a dual one: they are used for (1) comparisons between Member States and (2) for economic analyses. Absolute agricultural prices (especially aggregated prices) are needed for many model calculations and for the determination of price elasticities. This means that two objectives have to be met. The first one is that absolute prices be comparable between Member States. The second one is that the products for which the prices are to be recorded be of economic relevance for the respective Member State. These objectives are not necessarily compatible and some compromise may be necessary. Although much progress has already been made in the harmonisation of the time series across Member States, caution must still be exercised when comparing the actual agricultural prices among Member States. Differences in the prices can still reflect methodological differences (for example different form of commercialisation of the product concerned) and not factual differences in every case in the prices themselves. Hence, the user of the data should always refer to the description of the data as provided by the target definition The agricultural prices expressed in national currency are converted into Euro (ECU until 31.12.1998) in order to allow comparisons between Member States.

Eurostat Dataset Id:ei_bssi_m_r2 Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published: as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

Eurostat Dataset Id:ei_bsse_m_r2 Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published:as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

Six qualitative surveys are conducted on a monthly basis in the following areas: manufacturing industry, construction, consumers, retail trade, services and financial services. Some additional questions are asked on a quarterly basis in the surveys in industry, services, financial services, construction and among consumers. In addition, a survey is conducted twice a year on Investment in the manufacturing sector. The domain consists of a selection for variables from the following type of survey: Industry monthly questions for: production, employment expectations, order-book levels, stocks of finished products and selling price. Industry quarterly questions for:production capacity, order-books, new orders, export expectations, capacity utilization, Competitive position and factors limiting the production. Construction monthly questions for: trend of activity, order books, employment expectations, price expectations and factors limiting building activity. Construction quarterly questions for: operating time ensured by current backlog. Retail sales monthly questions for: business situation, stocks of goods, orders placed with suppliers and firm's employment. Services monthly questions for: business climate, evolution of demand, evolution of employment and selling prices. Services quarterly question for: factors limiting their business Consumer monthly questions for: financial situation, general economic situation, price trends, unemployment, major purchases and savings. Consumer quarterly questions for: intention to buy a car, purchase or build a home, home improvements. Financial services monthly questions for: business situation, evolution of demand and employment Financial services quarterly questions for: operating income, operating expenses, profitability of the company, capital expenditure and competitive position Monthly Confidence Indicators are computed for industry, services, construction, retail trade, consumers (at country level, EU and euro area level) and financial services (EU and euro area). An Economic Sentiment indicator (ESI) is calculated based on a selection of questions from industry, services, construction, retail trade and consumers at country level and aggregate level (EU and euro area). A monthly Euro-zone Business Climate Indicator is also available for industry. The data are published:as balance i.e. the difference between positive and negative answers (in percentage points of total answers)as indexas confidence indicators (arithmetic average of balances),at current level of capacity utilization (percentage)estimated months of production assured by orders (number of months)Unadjusted (NSA) and seasonally adjusted (SA)

Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements.Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics <

Animal production statistics cover three main sub-domains based on three pieces of relevant legislation and related gentlemen’s agreements.Livestock and meat statistics are collected under Regulation (EC) No 1165/2008. They cover meat production, as activity of slaughterhouses (monthly) and as other slaughtering (annual), meat production (gross indigenous production) forecast (semi-annual or quarterly), livestock statistics, including regional statistics. A quality report is also collected every third year.Milk and milk product statistics are collected under Decision 97/80/EC implementing Directive 96/16/EC. They cover farm production and utilisation of milk (annual), collection (monthly for cows’ milk) and production activity by dairies (annual) and statistics on the structure of dairies (every third year). An annual methodological report is also collected.Statistics on eggs for hatching and farmyard poultry chicks are collected under Regulation (EC) No 617/2008, implementing Regulation (EC) No 1234/2007 (Single CMO Regulation). They cover statistics on the structure (annual) and the activity (monthly) of hatcheries as well as reports on the external trade of chicks. European Economic Area countries (EEA, Iceland, Liechtenstein and Norway) are requested to provide milk statistics, with the exception of those related to home consumption, as stated in Annex XXI of the EEA Agreement. As Iceland is now a candidate country and Liechtenstein is exempted in the Agreement, only Norway is concerned. The Agreement between the European Community and the Swiss Confederation on cooperation in the field of statistics states that Switzerland must provide Eurostat with national milk statistics. It has been amended in 2013 for covering also some livestock and meat statistics. The same statistics are requested from the candidate countries as acquis communautaire. Further data about the same topics refer to repealed legal acts or agreements. The tables on animal product supply balance sheets (apro_mk_bal, apro_mt_bal and apro_ec_bal), statistics on the structure of rearing (apro_mt_str) and the number of laying hens (apro_ec_lshen) are therefore no longer updated. The same applies to some variables (external trade of animals and meat), periods (surveys in April or August) or items (number of horses) included in other tables. The statistical tables disseminated by Eurostat are organised into three groups of tables on Agricultural products (apro), i.e. Milk and milk products (apro_mk), Livestock and meat (apro_mt) and Poultry farming (apro_ec). This last label covers statistics on hatcheries and on trade in chicks. The regional animal production statistics collected on livestock (agr_r_animal) and on cows’ milk production on farms (agr_r_milk_pr) are disseminated separately. Due to the change in the legal basis or in the methodology, the time series may be broken. This is indicated by a flag in the tables. The detailed content of each table and the reference to its legal definition is provided in the table below. Table 3.1: Data tables disseminated regarding animal production statistics <

The Speedtest Global Index™ has long been the go-to resource for detailed information about internet performance around the world. It's about getting even better. Starting today, we are also including data on median performance to better reflect the speeds a user is more likely to achieve in a market and we will transition to only displaying median speeds on February 15, 2022. 

Note: Worldsteel's Steel Statistical Yearbook for 2019 and 2020 are concise version World steel's Steel Statistical Yearbook presents a cross-section of steel industry statistics. It contains comprehensive statistics from 2008 to 2022 on crude steel production by country and process, steel production by product, steel trade by product, apparent steel use and apparent steel use per capita by country, as well as production and trade of pig iron and directly reduced iron. It also includes data on production and trade of iron ore and trade of scrap.  of steel and true steel use. The statistics were collected from members of world steel and various international organizations.

The monthly energy data collections cover the most important energy commodities: Crude oil & Petroleum productsNatural gasSolid fuelsElectricity For each of the above mentioned commodities the inflowing data are delivered by the reporting countries to Eurostat via separate dedicated questionnaires. Important note: Renewable energies are not explicitly covered by a separate dedicated monthly questionnaire; only partial information, e.g. on biodiesels or on hydroelectricity, is included in other monthly questionnaires respectively.

The monthly energy data collections cover the most important energy commodities:Crude oil & Petroleum productsNatural gasSolid fuelsElectricity For each of the above mentioned commodities the inflowing data are delivered by the reporting countries to Eurostat via separate dedicated questionnaires. Important note: Renewable energies are not explicitly covered by a separate dedicated monthly questionnaire; only partial information, e.g. on biodiesels or on hydroelectricity, is included in other monthly questionnaires respectively.

The monthly energy data collections cover the most important energy commodities:Crude oil & Petroleum productsNatural gasSolid fuelsElectricity For each of the above mentioned commodities the inflowing data are delivered by the reporting countries to Eurostat via separate dedicated questionnaires. Important note: Renewable energies are not explicitly covered by a separate dedicated monthly questionnaire; only partial information, e.g. on biodiesels or on hydroelectricity, is included in other monthly questionnaires respectively.

Short-term monthly energy data collections cover the most important energy commodities: Oil & petroleum productsNatural gasElectricity Short-term monthly data provides information on main flows (quantities) on the supply side. The data collection covers the full spectrum of the 28 Member States of the European Union, EFTA country Norway, candidate countries (the Former Yugoslav Republic of Macedonia, Iceland, and Turkey). Data on monthly short term statistics are collected by standard questionnaires according to Annex D of the of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics (this questionnaire is shared with the IEA, OECD, UNECE, OPEC, OLADE, APEC, IEFS and corresponds to the so-called Joint Oil Data Initiative, short -named JODI questionnaire). A combination of business surveys and other sources are used e.g. customs data for imports and exports or census including all producing enterprises. Â

Short-term monthly energy data collections cover the most important energy commodities: Oil & petroleum productsNatural gasElectricity Short-term monthly data provides information on main flows (quantities) on the supply side. The data collection covers the full spectrum of the 28 Member States of the European Union, EFTA country Norway, candidate countries (the Former Yugoslav Republic of Macedonia, Iceland, and Turkey). Data on monthly short term statistics are collected by standard questionnaires according to Annex D of the of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics (this questionnaire is shared with the IEA, OECD, UNECE, OPEC, OLADE, APEC, IEFS and corresponds to the so-called Joint Oil Data Initiative, short -named JODI questionnaire). A combination of business surveys and other sources are used e.g. customs data for imports and exports or census including all producing enterprises. Â

The monthly energy data collections cover the most important energy commodities:Crude oil & Petroleum productsNatural gasSolid fuelsElectricity For each of the above mentioned commodities the inflowing data are delivered by the reporting countries to Eurostat via separate dedicated questionnaires. Important note: Renewable energies are not explicitly covered by a separate dedicated monthly questionnaire; only partial information, e.g. on biodiesels or on hydroelectricity, is included in other monthly questionnaires respectively.

The monthly energy data collections cover the most important energy commodities:Crude oil & Petroleum productsNatural gasSolid fuelsElectricity For each of the above mentioned commodities the inflowing data are delivered by the reporting countries to Eurostat via separate dedicated questionnaires. Important note: Renewable energies are not explicitly covered by a separate dedicated monthly questionnaire; only partial information, e.g. on biodiesels or on hydroelectricity, is included in other monthly questionnaires respectively.

Short-term monthly energy data collections cover the most important energy commodities: Oil & petroleum productsNatural gasElectricity Short-term monthly data provides information on main flows (quantities) on the supply side. The data collection covers the full spectrum of the 28 Member States of the European Union, EFTA country Norway, candidate countries (the Former Yugoslav Republic of Macedonia, Iceland, and Turkey). Data on monthly short term statistics are collected by standard questionnaires according to Annex D of the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statistics (this questionnaire is shared with the IEA, OECD, UNECE, OPEC, OLADE, APEC, IEFS and corresponds to the so-called Joint Oil Data Initiative, short-named JODI questionnaire). A combination of business surveys and other sources are used e.g. customs data for imports and exports or census including all producing enterprises.

Location:-Visitors are coming from mentioned location.(World is total of all visitors) Nationality:-Nationality of visitors, whether the nationality of the visitors is same as the location or they belong to different nationality.(Under this dimension "Total" represents total number of visitors by their nationality) Ports:-Tourist arrival via ports.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. Persons in time-related underemployment comprise all persons in employment, who satisfy the following three criteria during the reference period: a) are willing to work additional hours; b) are available to work additional hours i.e., are ready, within a specified subsequent period, to work additional hours, given opportunities for additional work; and c) worked less than a threshold relating to working time i.e., persons whose hours actually worked in all jobs during the reference period were below a threshold, to be chosen according to national circumstances. For details, refer to the Resolution concerning the measurement of underemployment and inadequate employment situations. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.

With the aim of promoting international comparability, statistics presented on ILOSTAT are based on standard international definitions wherever feasible and may differ from official national figures. This series is based on the 13th ICLS definitions. For time series comparability, it includes countries that have implemented the 19th ICLS standards, for which data are also available in the Work Statistics -- 19th ICLS (WORK) database. The time-related underemployment rate conveys the number of persons in time-related underemployment as a percent of the total number of persons in employment. Persons in time-related underemployment comprise all persons in employment, who satisfy the following three criteria during the reference period: a) are willing to work additional hours; b) are available to work additional hours i.e., are ready, within a specified subsequent period, to work additional hours, given opportunities for additional work; and c) worked less than a threshold relating to working time i.e., persons whose hours actually worked in all jobs during the reference period were below a threshold, to be chosen according to national circumstances. For more information, refer to the Labour Force Statistics (LFS and STLFS) database description.