Organisation for Economic Co-operation and Development

This dataset FDI by counterpart area and by economic activity, BMD4 includes inward and outward Foreign Direct Investment (FDI) flows, positions and income by partner country and by economic activity for OECD reporting economies. It is a simplified dataset with fewer breakdowns compared to the other separate datasets specifically dedicated to FDI flows, FDI positions or FDI income by counterpart area, or by economic activity. In this dataset, FDI exclude resident SPEs, when they exist (unless otherwise stated, see metadata attached at the reporting country level); and inward FDI positions are allocated to the ultimate counterpart country when available (see metadata attached at the reporting country level). Inward and outward FDI statistics in this dataset are presented on a directional basis (unless otherwise stated, see metadata attached at the reporting country level); they are measured in USD millions, in millions of national currency and as a share of total (for FDI positions only). This dataset supports FDI indicators by counterpart area and by economic activity available from the OECD Data Portal. In 2014, many countries implemented the latest international standards for Foreign Direct Investment (FDI) statistics:the OECD’s Benchmark Definition of FDI, 4th edition (BMD4); andthe IMF’s Balance of Payments and International Investment Position Manual, 6th edition (BPM6) This OECD database was launched in March 2015 which includes the data series reported by national experts according to BMD4. The data are for the most part based on balance of payments statistics published by Central Banks and Statistical Offices following the recommendations of the IMF’s BPM6 and the OECD’s BMD4. However, some of the data relate to other sources such as notifications or approvals.

This dataset FDI by counterpart area and by economic activity, BMD4 and historical BMD3 includes long time series of FDI statistics by partner country and by industry. It uses available BMD4 series and combines them with BMD3 historical series (from the unrevised OECD FDI datasets according to BMD3) as far back as 2005 and identifies breaks in series. For selected countries, breaks in series were removed as there was no significant impact of BMD4 implementation. In this dataset, inward and outward FDI flows, positions and income include resident SPEs when they exist (unless otherwise stated, see metadata attached at the reporting country level); and they are allocated to the immediate counterpart country (unless otherwise specified, see metadata attached at the reporting country level). Inward and outward FDI statistics in this datset are presented on a directional basis (unless otherwise stated, see metadata attached at the reporting country level); they are measured in USD millions, in millions of national currency and as a share of total (for FDI positions only). In 2014, many countries implemented the latest international standards for Foreign Direct Investment (FDI) statistics:the OECD’s Benchmark Definition of FDI, 4th edition (BMD4); andthe IMF’s Balance of Payments and International Investment Position Manual, 6th edition (BPM6) This OECD database was launched in March 2015 which includes the data series reported by national experts according to BMD4. The data are for the most part based on balance of payments statistics published by Central Banks and Statistical Offices following the recommendations of the IMF’s BPM6 and the OECD’s BMD4. However, some of the data relate to other sources such as notifications or approvals.

This dataset FDI flows by counterpart area, BMD4 includes inward and outward Foreign Direct Investment (FDI) flows by partner country for OECD reporting economies: Inward FDI flows by partner country measure the value of cross-border direct investment transactions received by the reporting economy during a year, by source country, enabling, for example, the identification of the major sources of FDI for a specific OECD economy in that year. Inward FDI flows are allocated to the immediate investing country. Outward FDI flows by partner country measure the value of cross-border direct investment transactions from the reporting economy during a year, by destination country or region, enabling, for example, the identification of the major destinations of FDI for a specific OECD economy in that year. Outward FDI flows are allocated to the immediate counterpart country for all OECD countries. Inward and outward FDI flows by partner country are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions and in millions of national currency.

This dataset FDI income by counterpart area, BMD4 includes Foreign Direct Investment (FDI) payments and receipts by partner country for OECD reporting economies:FDI income payments (or income on inward FDI) by partner country measure the total returns within a year on direct investment stocks paid by enterprises in the reporting economy to their foreign investors, by destination countries or regions, enabling, for example, the identification of the major destinations of FDI income payments for a specific OECD economy in that year. FDI income payments are allocated to the immediate counterpart country.FDi income receipts (or income on outward FDI) by partner country measure the total returns within a year on direct investment stocks received by investors in the reporting economy from their direct investment enterprises abroad, by source countries or region, enabling, for example, the identification of the major sources of FDI income receipts for a specific OECD economy in that year.. FDI income receipts are allocated to the immediate counterpart country or region for all OECD countries. Income payments and receipts (or income on inward and outward FDI respectively) by partner country are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions and in millions of national currency.

This dataset FDI positions by counterpart area, BMD4 includes inward and outward Foreign Direct Investment (FDI) positions by partner country for OECD reporting economies:Inward FDI positions by partner country measure the total level of direct investment in the reporting economy at the end of the year, by source countries, enabling, for example, the identification of the major sources of FDI for a specific OECD economy. Inward FDI positions are allocated to the immediate investing country but inward FDI positions allocated to the ultimate investing country are also available for some OECD economies.Outward FDI positions by partner country measure the total level of direct investment from the reporting economy at the end of the year, by destination countries, enabling, for example, the identification of the major destinations of FDI for a specific OECD economy. Outward FDI positions are allocated to the immediate counterpart country for all OECD countries. Inward and outward FDI positions by partner country are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions, in millions of national currency and as a share of total FDI positions. In 2014, many countries implemented the latest international standards for Foreign Direct Investment (FDI) statistics:the OECD’s Benchmark Definition of FDI, 4th edition (BMD4); andthe IMF’s Balance of Payments and International Investment Position Manual, 6th edition (BPM6) This OECD database was launched in March 2015 which includes the data series reported by national experts according to BMD4. The data are for the most part based on balance of payments statistics published by Central Banks and Statistical Offices following the recommendations of the IMF’s BPM6 and the OECD’s BMD4. However, some of the data relate to other sources such as notifications or approvals. Historical and unrevised series of FDI positions by counterpart area under the previous BMD3 methodology can be accessed in the archived dataset FDI positions by partner country.

This dataset FDI positions by economic activity, BMD4 includes inward and outward Foreign Direct Investment (FDI) positions by economic activity according to ISIC4 for OECD reporting economies:Inward FDI positions by economic activity measure the total level of direct investment in a specific industry of the reporting economy at the end of the year, enabling, for example, the identification of the most attractive industry sectors for FDI in each OECD economy.Outward FDI positions by economic activity measure the total level of direct investment from the reporting economy at the end of the year, by industry sector. The industry sector corresponds to the activity of the direct investment enterprise or to the activity of the direct investor (more details on the activity allocation method for outward FDI positions are indicated in the metadata information attached at the country level). Inward and outward FDI positions by economic activity are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions, in millions of national currency and as a share of total FDI positions. A cross-classification of inward and outward FDI positions by major ISIC4 sections and by main geographic aggregates are also available for some OECD reporting economies. In 2014, many countries implemented the latest international standards for Foreign Direct Investment (FDI) statistics:the OECD’s Benchmark Definition of FDI, 4th edition (BMD4); andthe IMF’s Balance of Payments and International Investment Position Manual, 6th edition (BPM6) This OECD database was launched in March 2015 which includes the data series reported by national experts according to BMD4. The data are for the most part based on balance of payments statistics published by Central Banks and Statistical Offices following the recommendations of the IMF’s BPM6 and the OECD’s BMD4. However, some of the data relate to other sources such as notifications or approvals. Historical and unrevised series of FDI positions by economic activity under the previous BMD3 methodology can be accessed in the archived dataset FDI positions by industry.

The number of students enrolled refers to the count of students studying in the reference period. Each student enrolled in the education programmes covered by the corresponding category is counted once and only once. National data collection systems permitting, the statistics reflect the number of students enrolled at the beginning of the school / academic year. Preferably, the end (or near-end) of the first month of the school / academic year is chosen (special arrangements are made for part-year students who may not start studies at the beginning of the school year). Students are classified as foreign students (non-citizens) if they are not citizens of the country in which the data are collected. While pragmatic and operational, this classification is inappropriate for capturing student mobility because of differing national policies regarding the naturalisation of immigrants. Countries that have lower propensity to grant permanent residence to its immigrant populations are likely to report second generation immigrants as foreign students. Therefore, for student mobility and bilateral comparisons, interpretations of data based on the concept of foreign students should be made with caution. Students are classified as international students if they left their country of origin and moved to another country for the purpose of study. Depending on country-specific immigration legislation, mobility arrangements, and data availability, international students may be defined as students who are not permanent or usual residents of their country of study or alternatively as students who obtained their prior education in a different country, including another EU country.

ICT goods are those that are either intended to fulfil the function of information processing and communication by electronic means, including transmission and display, OR which use electronic processing to detect, measure and/or record physical phenomena, or to control a physical process. ICT goods are defined by the OECD in terms of the Harmonised System. The guiding principle for the delineation of ICT goods is that such goods must either be intended to fulfil the function of information processing and communication by electronic means, including transmission and display, OR use electronic processing to detect, measure and/or record physical phenomena, or to control a physical process.Another guiding principle was to use existing classification systems in order to take advantage of existing data sets and therefore ensure the immediate use of the proposed standard. In this case, the underlying system is the Harmonized System (HS). The HS is the only commodity classification system used on a sufficiently wide basis to support international data comparison. A large number of countries use it to classify export and import of goods, and many countries use it (or a classification derived from or linked to it) to categorise domestic outputs.The application of the ICT product definition to selection of in-scope HS categories is a somewhat subjective exercise. The fact that the HS is not built on the basis of the functionality of products makes it much more difficult. The distinction between products which fulfil those functions and products that simply embody electronics but fundamentally fulfil other functions is not always obvious.It is possible to adopt a narrow or broad interpretation of the guideline, though the OECD chose a broader interpretation, an approach which is consistent with that adopted to develop the ICT sector definition.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older with a tertiary education.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible. The exact national source and reference period for each file is given in Table A.1 (see the methodological document).

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The allocation of bilateral intermediate imports across using industries assumes that import coefficients are the same for all trade partners, i.e. SHAREipkt is identical across exporter countries. Hence, the bilateral pattern of imported intermediates from industry p is the same across all using industries k. However, it is different from the bilateral pattern of total imports from industry p because trade data (measured by VALUEijpt) allows distinguishing bilateral imports of intermediates from final good imports in industry p. While the BEC classification enables the identification of intermediate goods, no similar classification is available for trade in services, due to the high level of aggregation in services trade data. While goods trade data are based on customs declarations allowing the identification of goods at a highly disaggregated level, services trade data are based on a variety of information such as business accounts, administrative sources, surveys, and estimation techniques (Manual on Statistics of International Trade in Services, 2002). Hence, in the case of trade in services, VALUEijpt is the total value of imports of service p, i.e. both final and intermediate (and not only services that are used in the production of other goods and services, as in the case of goods data). By making an additional assumption and adjusting SHAREipkt, it is however possible to calculate trade in intermediate services. In the case of services imports, SHAREipkt is the share of imported service inputs p used by industry k in total imports of p of country i. In the case of services, besides the assumption that all trading partners have the same distribution of intermediate imports p across using industries k, it is furthermore required that the share of intermediate services in overall bilateral services imports of country i is the same across all partner countries j. Finally, it should be mentioned that trade data reported in the trade statistics do not fully match imports as reported in I-O tables. One main reason is that while trade data is recorded at consumer prices, I-O tables are evaluated at producer prices. There are also other differences such as the treatment of re-exports, scrap metal, waste products and second hand goods or unallocated trade data.

This dataset presents patent statistics and indicators that are suitable for tracking innovation in environment-related technologies. They allow the assessment of countries and firms' innovation performance as well as the design of governments' environmental and innovation policies.

This dataset contains the number of people who graduated from an education programme by country of origin and sex.

This table contains figures on affiliates under foreign control by investing country in the total manufacturing, total services and total business enterprise sectors.

The Maritime Transport Costs (MTC)database contains data from 1991 to the most recent available year of bilateral maritime transport costs. Transport costs are available for 43 importing countries (including EU15 countries as a custom union) from 218 countries of origin at the detailed commodity (6 digit) level of the Harmonized System 1988. This dataset should only be used in conjunction with the paper Clarifying Trade Costs in Maritime Transport which outlines methodology, data coverage and caveats to its use. Key Statistical Concept Import charges represent the aggregate cost of all freight, insurance and other charges (excluding import duties) incurred in bringing the merchandise from alongside the carrier at the port of export and placing it alongside the carrier at the first port of entry in the importing country. Insurance charges are therefore included in the transport cost variables and are estimated to be approximately 1.5% of the import value of the merchandise.

This table contains figures on the activity of affiliates located abroad by host country in the total manufacturing, total services and total business enterprise sectors. The units used to present data in AMNE are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

The SIGI is built on 27 innovative variables measuring discriminatory social institutions, which are grouped into 4 dimensions: discrimination in the family, restricted physical integrity, restricted access to productive and financial resources, and restricted civil liberties.Lower values indicate lower levels of discrimination in social institutions: the SIGI ranges from 0% for no discrimination to 100% for very high discrimination.

This table presents export/import information by enterprise size class and partner country.

This dataset shows the number of exporters and importers and their associated trade values for a selected set of partner countries and zones, broken down by three economic sectors: industry, trade and repair and other sectors. Total values for the wide economy are also displayed.Recommended uses and limitations EU countries break down trade data into Intra- and extra- EU zones, whereas non EU countries report their Total trade. Trade values have been aggregated for EU countries and Total (Intra-EU plus Extra-EU) trade flows are displayed, whereas Intra and Extra-EU data expressed in term of number of enterprises cannot be summed up, because of possible double-counting (same enterprise can be trader in both intra- and extra- EU trade). Data have been collected in ISIC revision 3 from 2003 up to 2007 and in ISIC revision 4 as from reference year 2008. Time series are affected by this change in classification, and thus data are displayed into two separate databases.