Organisation for Economic Co-operation and Development

AEO (African Economic Outlook) Country Notes Tables, 2015

AEO (African Economic Outlook) Statistical Annex, 2015

This dataset contains bilateral commitment data on aid in support of environment sustainability and aid to biodiversity, climate change mitigation, climate change adaptation and desertification from the Development Assistance Committee (DAC) Creditor Reporting System (CRS) database. In their reporting to the DAC CRS, donors are requested to indicate for each activity whether or not it targets environment and the Rio Conventions (biodiversity, climate change mitigation, climate change adaptation and desertification). A scoring system of three values is used, in which aid activities are "marked" as targeting environment as the "principal objective" or a "significant objective", or as not targeting the objective. The environment marker identifies activities that are "intended to produce an improvement in the physical and/or biological environment of the recipient country, area or target group concerned" or "include specific action to integrate environmental concerns with a range of development objectives through institution building and/or capacity development". A large majority of activities targeting the objectives of the Rio Conventions fall under the DAC definition of "aid to environment". The Rio markers permit their specific identification.

This database includes annual, quarterly and monthly information on carbon dioxide (CO2) emissions related to commercial passenger, freight, and general aviation flights, on both a territory and a residence basis, for 186 countries. These CO2 emissions are estimated by the OECD, based on a consistent methodology across countries. The main source used for the estimation of these CO2 emissions is a database compiled by the International Civil Aviation Organisation (ICAO) with all commercial passenger and freight flights around the world.

The OECD-WTO Balanced Trade in Services (BaTIS) dataset is a complete, consistent, and balanced matrix of international trade in services statistics (ITSS). It contains annual bilateral data covering 202 reporters and partners, broken down by the 12 main EBOPS2010 (BPM6) categories from 2005 to 2021. BaTIS is the result of joint efforts by the OECD and WTO. Two main features enable BaTIS to stand out as the international benchmark for any analysis on international trade in services:BaTIS is complete and consistent. At present, only about 63% of world trade in services is bilaterally specified, and the percentage is even lower for the individual service categories. The OECD-WTO methodology leverages all available official statistics and combines them with estimations and adjustments to provide users with a complete matrix covering virtually all economies in the world.BaTIS is balanced. To resolve the asymmetries between reported and mirror flows, exports and imports are reconciled by calculating a symmetry-index weighted average between the two, following a similar approach to that developed for international merchandise trade statistics. BaTIS provides 3 adjustments for each trade flow:Reported. Reflects the value officially reported by the country (where available), some values are rescaled to fit world totals.Adjusted and/or imputed. Reflects, in addition to the reported values, any adjustments made to ensure internal consistency as well as the estimations made by the OECD-WTO to fill in the gaps in the reported information.Balanced. Reflects the reconciled bilateral trade flow, where exports equal mirror imports. Official information on bilateral trade flows was collected from OECD, Eurostat, national sources as well as UNSD. The WTO-UNCTAD trade in services dataset, based on a number of primary sources complemented with estimations, was the main source for data with partner world. The BaTIS dataset can be used as a stand-alone input for economic analysis and policy-making. In addition, balanced trade in services data form an essential input to the OECD Trade in Value Added (TiVA) initiative, for which a balanced view of international trade is crucial. BaTIS is intended to be regularly updated and constantly improved as new data become available. For more information on the methodology, please refer to the working paper accompanying this dataset The OECD-WTO Balanced Trade in Services (BaTIS) For more information on balanced trade statistics, please go to the topic related OECD page Balanced trade statistics Users are encouraged to send their questions, or to signal any apparent errors, regarding this database to [email protected]://www.oecd.org/sdd

Note: CPA data for 2018 and 2019 are projections from the 2016 Survey on Forward Spending Plans. Country Programmable Aid (CPA), outlined in our Development Brief  and also known as “core” aid, is the portion of aid donors programme for individual countries, and over which partner countries could have a significant say. CPA is much closer than ODA to capturing the flows of aid that goes to the partner country, and has been proven in several studies to be a good proxy of aid recorded at country level. CPA was developed in 2007 in close collaboration with DAC members. It is derived on the basis of DAC statistics and was retroactively calculated from 2000 onwards

The objective of the CRS Aid Activity database is to provide a set of readily available basic data that enables analysis on where aid goes, what purposes it serves and what policies it aims to implement, on a comparable basis for all DAC members. Data are collected on individual projects and programmes. Focus is on financial data but some descriptive information is also made available.

Number of students enrolled in different education programmes by country of origin and sex.

Environmentally related taxes are effective policy instruments to shape relative prices of goods and services. The Environmental Related Tax Revenue Database (ERTR) categorises taxes based on their environmental relevance, constructing environmentally related tax revenue with a breakdown by tax-base category (including energy, transport, pollution, and resources) and 22 environmental domains. Note that tax-base categories are mutually exclusive, while domains are not. Therefore, one should not aggregate revenue across domains as it may lead to double counting.

Air pollution is considered one of the most pressing environmental and health issues across OECD countries and beyond. According to the World Health Organisation (WHO), exposure to fine particulate matter (PM2.5) has potentially the most significant adverse effects on health compared to other pollutants. PM2.5 can be inhaled and cause serious health problems including both respiratory and cardiovascular disease, having its most severe effects on children and elderly people. Exposure to PM2.5 has been shown to considerably increase the risk of heart disease and stroke in particular. For these reasons, population exposure to (outdoor or ambient) PM2.5 has been identified as an OECD Green Growth headline indicator. The underlying PM2.5 concentrations estimates are taken from van Donkelaar et al. (2016). They have been derived using satellite observations and a chemical transport model, calibrated to global ground-based measurements using Geographically Weighted Regression at 0.01° resolution. The underlying population data, Gridded Population of the World, version 4 (GPWv4) are taken from the Socioeconomic Data and Applications Center (SEDAC) at the NASA. The underlying boundary geometries are taken from the Global Administrative Unit Layers (GAUL) developed by the FAO, and the OECD Territorial Classification, when available. The current version of the database presents much more variation with respect to the previous one. The reason is that the underlying concentration estimates previously included smoothed multi-year averages and interpolations; while in the current version annual concentration estimates are used. Establishing trends of pollution exposure should be done with care, especially at smaller output areas, as their inputs (e.g. underlying data and models) can change from year to year. We recommend using a 3-year moving average for visualisation.

This dataset FDI by counterpart area and by economic activity, BMD4 includes inward and outward Foreign Direct Investment (FDI) flows, positions and income by partner country and by economic activity for OECD reporting economies. It is a simplified dataset with fewer breakdowns compared to the other separate datasets specifically dedicated to FDI flows, FDI positions or FDI income by counterpart area, or by economic activity. In this dataset, FDI exclude resident SPEs, when they exist (unless otherwise stated, see metadata attached at the reporting country level); and inward FDI positions are allocated to the ultimate counterpart country when available (see metadata attached at the reporting country level). Inward and outward FDI statistics in this dataset are presented on a directional basis (unless otherwise stated, see metadata attached at the reporting country level); they are measured in USD millions, in millions of national currency and as a share of total (for FDI positions only). This dataset supports FDI indicators by counterpart area and by economic activity available from the OECD Data Portal. In 2014, many countries implemented the latest international standards for Foreign Direct Investment (FDI) statistics:the OECD’s Benchmark Definition of FDI, 4th edition (BMD4); andthe IMF’s Balance of Payments and International Investment Position Manual, 6th edition (BPM6) This OECD database was launched in March 2015 which includes the data series reported by national experts according to BMD4. The data are for the most part based on balance of payments statistics published by Central Banks and Statistical Offices following the recommendations of the IMF’s BPM6 and the OECD’s BMD4. However, some of the data relate to other sources such as notifications or approvals.

This dataset FDI by counterpart area and by economic activity, BMD4 and historical BMD3 includes long time series of FDI statistics by partner country and by industry. It uses available BMD4 series and combines them with BMD3 historical series (from the unrevised OECD FDI datasets according to BMD3) as far back as 2005 and identifies breaks in series. For selected countries, breaks in series were removed as there was no significant impact of BMD4 implementation. In this dataset, inward and outward FDI flows, positions and income include resident SPEs when they exist (unless otherwise stated, see metadata attached at the reporting country level); and they are allocated to the immediate counterpart country (unless otherwise specified, see metadata attached at the reporting country level). Inward and outward FDI statistics in this datset are presented on a directional basis (unless otherwise stated, see metadata attached at the reporting country level); they are measured in USD millions, in millions of national currency and as a share of total (for FDI positions only). In 2014, many countries implemented the latest international standards for Foreign Direct Investment (FDI) statistics:the OECD’s Benchmark Definition of FDI, 4th edition (BMD4); andthe IMF’s Balance of Payments and International Investment Position Manual, 6th edition (BPM6) This OECD database was launched in March 2015 which includes the data series reported by national experts according to BMD4. The data are for the most part based on balance of payments statistics published by Central Banks and Statistical Offices following the recommendations of the IMF’s BPM6 and the OECD’s BMD4. However, some of the data relate to other sources such as notifications or approvals.

This dataset FDI flows by counterpart area, BMD4 includes inward and outward Foreign Direct Investment (FDI) flows by partner country for OECD reporting economies: Inward FDI flows by partner country measure the value of cross-border direct investment transactions received by the reporting economy during a year, by source country, enabling, for example, the identification of the major sources of FDI for a specific OECD economy in that year. Inward FDI flows are allocated to the immediate investing country. Outward FDI flows by partner country measure the value of cross-border direct investment transactions from the reporting economy during a year, by destination country or region, enabling, for example, the identification of the major destinations of FDI for a specific OECD economy in that year. Outward FDI flows are allocated to the immediate counterpart country for all OECD countries. Inward and outward FDI flows by partner country are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions and in millions of national currency.

This dataset FDI flows by economic activity, BMD4 includes inward and outward Foreign Direct Investment (FDI) flows by economic activity for OECD reporting economies: Inward FDI flows by economic activity measure the value of cross-border direct investment transactions received by the reporting economy in a specific industry during a year, enabling, for example, the identification of the most attractive industries for FDI in each OECD economy in that year. Outward FDI flows by economic activity measure the value of cross-border direct investment transactions from the reporting economy during a year, by industry. The industry sector corresponds to the activity of the direct investment enterprise or to the activity of the direct investor (more details on the activity allocation method for outward FDI flows are indicated in the metadata information attached at the country level). Inward and outward FDI flows by economic activity are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions and in millions of national currency. A cross-classification of inward and outward FDI flows by major ISIC4 sections and by main geographic aggregates are also available for some OECD reporting economies.

This dataset FDI flows by economic activity, BMD4 includes inward and outward Foreign Direct Investment (FDI) flows by economic activity for OECD reporting economies:Inward FDI flows by economic activity measure the value of cross-border direct investment transactions received by the reporting economy in a specific industry during a year, enabling, for example, the identification of the most attractive industries for FDI in each OECD economy in that year.Outward FDI flows by economic activity measure the value of cross-border direct investment transactions from the reporting economy during a year, by industry. The industry sector corresponds to the activity of the direct investment enterprise or to the activity of the direct investor (more details on the activity allocation method for outward FDI flows are indicated in the metadata information attached at the country level). Inward and outward FDI flows by economic activity are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions and in millions of national currency. A cross-classification of inward and outward FDI flows by major ISIC4 sections and by main geographic aggregates are also available for some OECD reporting economies. In 2014, many countries implemented the latest international standards for Foreign Direct Investment (FDI) statistics:the OECD’s Benchmark Definition of FDI, 4th edition (BMD4); andthe IMF’s Balance of Payments and International Investment Position Manual, 6th edition (BPM6) An OECD database was launched in March 2015 which includes the data series reported by national experts according to BMD4. The data are for the most part based on balance of payments statistics published by Central Banks and Statistical Offices following the recommendations of the IMF’s BPM6 and the OECD’s BMD4. However, some of the data relate to other sources such as notifications or approvals. Historical and unrevised series of FDI flows by economic activity under the previous BMD3 methodology can be accessed in the archived dataset FDI flows by industry.

This dataset FDI income by counterpart area, BMD4 includes Foreign Direct Investment (FDI) payments and receipts by partner country for OECD reporting economies:FDI income payments (or income on inward FDI) by partner country measure the total returns within a year on direct investment stocks paid by enterprises in the reporting economy to their foreign investors, by destination countries or regions, enabling, for example, the identification of the major destinations of FDI income payments for a specific OECD economy in that year. FDI income payments are allocated to the immediate counterpart country.FDi income receipts (or income on outward FDI) by partner country measure the total returns within a year on direct investment stocks received by investors in the reporting economy from their direct investment enterprises abroad, by source countries or region, enabling, for example, the identification of the major sources of FDI income receipts for a specific OECD economy in that year.. FDI income receipts are allocated to the immediate counterpart country or region for all OECD countries. Income payments and receipts (or income on inward and outward FDI respectively) by partner country are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions and in millions of national currency.

This dataset FDI income by economic activity, BMD4 includes Foreign Direct Investment (FDI) payments and receipts by economic activity for OECD reporting economies: FDI income payments (or income on inward FDI) by economic activity measure the total returns within a year on direct investment stocks paid by enterprises in the reporting economy, in a specific industry, to their foreign investors. FDi income receipts (or income on outward FDI) by economic activity measure the total returns within a year on direct investment stocks received by investors in the reporting economy from their direct investment enterprises abroad, by industry. The industry sector corresponds to the activity of the direct investment enterprise or to the activity of the direct investor (more details on the activity allocation method for FDI income receipts are indicated in the metadata information attached at the country level). Income payments and receipts (or income on inward and outward FDI respectively) by economic activity are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions and in millions of national currency.

This dataset FDI income by economic activity, BMD4 includes Foreign Direct Investment (FDI) payments and receipts by economic activity for OECD reporting economies:FDI income payments (or income on inward FDI) by economic activity measure the total returns within a year on direct investment stocks paid by enterprises in the reporting economy, in a specific industry, to their foreign investors.FDi income receipts (or income on outward FDI) by economic activity measure the total returns within a year on direct investment stocks received by investors in the reporting economy from their direct investment enterprises abroad, by industry. The industry sector corresponds to the activity of the direct investment enterprise or to the activity of the direct investor (more details on the activity allocation method for FDI income receipts are indicated in the metadata information attached at the country level). Income payments and receipts (or income on inward and outward FDI respectively) by economic activity are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions and in millions of national currency. In 2014, many countries implemented the latest international standards for Foreign Direct Investment (FDI) statistics:the OECD’s Benchmark Definition of FDI, 4th edition (BMD4); andthe IMF’s Balance of Payments and International Investment Position Manual, 6th edition (BPM6) This OECD database was launched in March 2015 which includes the data series reported by national experts according to BMD4. The data are for the most part based on balance of payments statistics published by Central Banks and Statistical Offices following the recommendations of the IMF’s BPM6 and the OECD’s BMD4. However, some of the data relate to other sources such as notifications or approvals.

This dataset FDI positions by counterpart area, BMD4 includes inward and outward Foreign Direct Investment (FDI) positions by partner country for OECD reporting economies:Inward FDI positions by partner country measure the total level of direct investment in the reporting economy at the end of the year, by source countries, enabling, for example, the identification of the major sources of FDI for a specific OECD economy. Inward FDI positions are allocated to the immediate investing country but inward FDI positions allocated to the ultimate investing country are also available for some OECD economies.Outward FDI positions by partner country measure the total level of direct investment from the reporting economy at the end of the year, by destination countries, enabling, for example, the identification of the major destinations of FDI for a specific OECD economy. Outward FDI positions are allocated to the immediate counterpart country for all OECD countries. Inward and outward FDI positions by partner country are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions, in millions of national currency and as a share of total FDI positions. In 2014, many countries implemented the latest international standards for Foreign Direct Investment (FDI) statistics:the OECD’s Benchmark Definition of FDI, 4th edition (BMD4); andthe IMF’s Balance of Payments and International Investment Position Manual, 6th edition (BPM6) This OECD database was launched in March 2015 which includes the data series reported by national experts according to BMD4. The data are for the most part based on balance of payments statistics published by Central Banks and Statistical Offices following the recommendations of the IMF’s BPM6 and the OECD’s BMD4. However, some of the data relate to other sources such as notifications or approvals. Historical and unrevised series of FDI positions by counterpart area under the previous BMD3 methodology can be accessed in the archived dataset FDI positions by partner country.

This dataset FDI positions by economic activity, BMD4 includes inward and outward Foreign Direct Investment (FDI) positions by economic activity according to ISIC4 for OECD reporting economies:Inward FDI positions by economic activity measure the total level of direct investment in a specific industry of the reporting economy at the end of the year, enabling, for example, the identification of the most attractive industry sectors for FDI in each OECD economy.Outward FDI positions by economic activity measure the total level of direct investment from the reporting economy at the end of the year, by industry sector. The industry sector corresponds to the activity of the direct investment enterprise or to the activity of the direct investor (more details on the activity allocation method for outward FDI positions are indicated in the metadata information attached at the country level). Inward and outward FDI positions by economic activity are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions, in millions of national currency and as a share of total FDI positions. A cross-classification of inward and outward FDI positions by major ISIC4 sections and by main geographic aggregates are also available for some OECD reporting economies. In 2014, many countries implemented the latest international standards for Foreign Direct Investment (FDI) statistics:the OECD’s Benchmark Definition of FDI, 4th edition (BMD4); andthe IMF’s Balance of Payments and International Investment Position Manual, 6th edition (BPM6) This OECD database was launched in March 2015 which includes the data series reported by national experts according to BMD4. The data are for the most part based on balance of payments statistics published by Central Banks and Statistical Offices following the recommendations of the IMF’s BPM6 and the OECD’s BMD4. However, some of the data relate to other sources such as notifications or approvals. Historical and unrevised series of FDI positions by economic activity under the previous BMD3 methodology can be accessed in the archived dataset FDI positions by industry.

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

The number of students enrolled refers to the count of students studying in the reference period. Each student enrolled in the education programmes covered by the corresponding category is counted once and only once. National data collection systems permitting, the statistics reflect the number of students enrolled at the beginning of the school / academic year. Preferably, the end (or near-end) of the first month of the school / academic year is chosen (special arrangements are made for part-year students who may not start studies at the beginning of the school year). Students are classified as foreign students (non-citizens) if they are not citizens of the country in which the data are collected. While pragmatic and operational, this classification is inappropriate for capturing student mobility because of differing national policies regarding the naturalisation of immigrants. Countries that have lower propensity to grant permanent residence to its immigrant populations are likely to report second generation immigrants as foreign students. Therefore, for student mobility and bilateral comparisons, interpretations of data based on the concept of foreign students should be made with caution. Students are classified as international students if they left their country of origin and moved to another country for the purpose of study. Depending on country-specific immigration legislation, mobility arrangements, and data availability, international students may be defined as students who are not permanent or usual residents of their country of study or alternatively as students who obtained their prior education in a different country, including another EU country.

Data include pension funds per the OECD classification by type of pension plans and by type of pension funds. All types of plans are included (occupational and personal, mandatory and voluntary). The OECD classification considers both funded and book reserved pension plans that are workplace-based (occupational pension plans) or accessed directly in retail markets (personal pension plans). Both mandatory and voluntary arrangements are included. The data include plans where benefits are paid by a private sector entity (classified as private pension plans by the OECD) as well as those paid by a funded public sector entity. A full description of the OECD classification can be found at:http://www.oecd.org/dataoecd/0/49/38356329.pdf. Pension funds include also some personal pension arrangements like the Individual Retirement Accounts (IRAs) in the United States as well as funds for government workers. The coverage of the statistics follows the regulatory and supervisory framework. All authorised pension funds are therefore normally covered by the Global Pension Statistics exercise. Assets pertaining to reserve funds in social security systems are excluded.

Data include pension funds per the OECD classification by type of pension plans and by type of pension funds. All types of plans are included (occupational and personal, mandatory and voluntary). The OECD classification considers both funded and book reserved pension plans that are workplace-based (occupational pension plans) or accessed directly in retail markets (personal pension plans). Both mandatory and voluntary arrangements are included. The data include plans where benefits are paid by a private sector entity (classified as private pension plans by the OECD) as well as those paid by a funded public sector entity. A full description of the OECD classification can be found at: http://www.oecd.org/dataoecd/0/49/38356329.pdf.  Pension funds include also some personal pension arrangements like the Individual Retirement Accounts (IRAs) in the United States as well as funds for government workers. The coverage of the statistics follows the regulatory and supervisory framework. All authorised pension funds are therefore normally covered by the Global Pension Statistics exercise. Assets pertaining to reserve funds in social security systems are excluded.

The GID-DB is a database providing researchers and policymakers with key data on gender-based discrimination in social institutions. This data helps analyse women’s empowerment and understand gender gaps in other key areas of development.Covering 180 countries and territories, the GID-DB contains comprehensive information on legal, cultural and traditional practices that discriminate against women and girls.

This table provides information on the main relevant indicators. The data have mainly been supplied by the World Bank, and cover, where available: -Current Gross National Income (GNI) in US $ millions; -GNI per capita (US $); -Population; -Energy use as kilogram of oil per capita; -Average Life Expectancy of Adults; and -Adult Literacy Rate as a percentage of the country population. Data for Sudan include South Sudan, with the exception of total population, which is reported separately.

Bilateral ODA commitments by purpose. Data cover the years 2005 to 2009. Amounts are expressed in USD million. The sectoral distribution of bilateral ODA commitments refers to the economic sector of destination (i.e. the specific area of the recipient's economic or social structure whose development is, or is intended to be fostered by the aid), rather than to the type of goods or services provided. These are aggregates of individual projects notified under the Creditor Reporting System, supplemented by reporting on the sectoral distribution of technical co-operation, and on actual disbursements of food and emergency aid.

This data set combines the different regional publications of Revenue Statistics:Revenue Statistics 2019OECD/ATAF/AUC (2019), Revenue Statistics in Africa 2019OECD et al (2020), Revenue Statistics in Latin America and the Caribbean 2020 (LAC)Revenue Statistics in Asian and Pacific Economies 2019 Revenue Statistics The annual statistical publications present a unique set of detailed and internationally comparable tax revenue data in a common format. Its approach is based on the well-established methodology of the OECD Revenue Statistics (OECD, 2019), which has become an essential reference. It provides a conceptual framework defining which government receipts should be regarded as taxes and classifies different types of taxes. Comparable tables show revenue data by type of tax in national currency, as a percentage of GDP, and, for the different types of taxes, as a share of total taxation. Comparisons are also made with the averages of the 36 OECD economies, of the 24 LAC countries (two of which are OECD members countries° and of 26 African countries.   The data set does not replace the other publications, and users are advised to consult the regional data sets for country specific information.

The OECD Green Growth database contains selected indicators for monitoring progress towards green growth to support policy making and inform the public at large. The database synthesises data and indicators across a wide range of domains including a range of OECD databases as well as external data sources. The database covers OECD member and accession countries, key partners (including Brazil, China, India, Indonesia and South Africa) and other selected non-OECD countries.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older with a tertiary education.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible. The exact national source and reference period for each file is given in Table A.1 (see the methodological document).

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The allocation of bilateral intermediate imports across using industries assumes that import coefficients are the same for all trade partners, i.e. SHAREipkt is identical across exporter countries. Hence, the bilateral pattern of imported intermediates from industry p is the same across all using industries k. However, it is different from the bilateral pattern of total imports from industry p because trade data (measured by VALUEijpt) allows distinguishing bilateral imports of intermediates from final good imports in industry p. While the BEC classification enables the identification of intermediate goods, no similar classification is available for trade in services, due to the high level of aggregation in services trade data. While goods trade data are based on customs declarations allowing the identification of goods at a highly disaggregated level, services trade data are based on a variety of information such as business accounts, administrative sources, surveys, and estimation techniques (Manual on Statistics of International Trade in Services, 2002). Hence, in the case of trade in services, VALUEijpt is the total value of imports of service p, i.e. both final and intermediate (and not only services that are used in the production of other goods and services, as in the case of goods data). By making an additional assumption and adjusting SHAREipkt, it is however possible to calculate trade in intermediate services. In the case of services imports, SHAREipkt is the share of imported service inputs p used by industry k in total imports of p of country i. In the case of services, besides the assumption that all trading partners have the same distribution of intermediate imports p across using industries k, it is furthermore required that the share of intermediate services in overall bilateral services imports of country i is the same across all partner countries j. Finally, it should be mentioned that trade data reported in the trade statistics do not fully match imports as reported in I-O tables. One main reason is that while trade data is recorded at consumer prices, I-O tables are evaluated at producer prices. There are also other differences such as the treatment of re-exports, scrap metal, waste products and second hand goods or unallocated trade data.

This dataset presents patent statistics and indicators that are suitable for tracking innovation in environment-related technologies. They allow the assessment of countries and firms' innovation performance as well as the design of governments' environmental and innovation policies.

This dataset contains the number of people who graduated from an education programme by country of origin and sex.

This indicator reports the percentage of students of each country of origin over the total of international students.

Metadata by country are available in English and French. Please click on the link below: https://www.oecd.org/sdd/its/OECD-Trade-In-Services-EBOPS2010-metadata-all-countries.pdf. The aim of this dataflow International Trade in Services EBOPS 2010 (by partner country) is to collect and disseminate balance of payments data on international trade in services at the most detailed partner country level available. To the extent that countries report them, data are also broken down by type of service according to the EBOPS 2010 classification. There has been a growing interest in monitoring patterns of trade in services around the world, which is partly associated with ongoing trade negotiations and partly due to the increasing importance of services in OECD economies. It has been developed to supplement other OECD publications on trade in services to address the data needs of trade analysts. It is also an important part of OECD's programme to facilitate the implementation of the recommendations of the revised Manual on Statistics of International Trade in Services 2010. The currency unit used for all series is: Millions of US dollars or Millions of National Currency or Millions of Euros. OECD statistics contact: [email protected] http://www.oecd.org/sdd

This table contains figures on affiliates under foreign control by investing country in the total manufacturing, total services and total business enterprise sectors.

The IPP.Stat is the statistics portal of the Innovation Policy Platform containing the main available indicators relevant to a country’s innovation performance. In addition to the traditional indicators used to monitor innovation, the range of the coverage to be found in the IPP.Stat calls for the inclusion of indicators from other domains that describe the broader national and international context in which innovation occurs. Indicators are sourced primarily from the OECD and the World Bank, as well as from other sources of comparable quality. The statistics portal is still under development.

The land cover dataset provides a global assessment of land cover and land cover change to monitor pressures on ecosystems and biodiversity. By using geospatial data with high spatio-temporal resolution, it develops a set of internationally comparable indicators with a long time series from 2000 to 2020 with a five-year interval. Please see the working paper for a more complete description of the methods. The dataset has a global coverage on the national level, while on the sub-national TL2 level (i.e. large subnational regions) results are reported for all OECD countries as well as for Argentina, Brazil, China, India, Indonesia and South Africa. The following country aggregates are included: Euro area, European Union, Advanced economies, Emerging market economies, G7, G20, OECD, OECD Europe, OECD Asia Oceania, OECD Americas, the LAC region and the World. Data source(s): Copernicus Climate Change Initiative land cover data and Global Human Settlement Layer built-up area data. Contact: [email protected] Database documentation

Land resources are one of the four components of the natural environment: water, air, land and living resources. In this context land is both: a physical "milieu" necessary for the development of natural vegetation as well as cultivated vegetation;a resource for human activities.  The data presented here give information concerning land use state and changes (e.g. agricultural land, forest land).  Land area excludes area under inland water bodies (i.e. major rivers and lakes).   Arable refers to all land generally under rotation, whether for temporary crops (double-cropped areas are counted only once) or meadows, or left fallow (less than five years). These data are not meant to indicate the amount of land that is potentially cultivable.  Permanent crops are those that occupy land for a long period and do not have to be planted for several years after each harvest (e.g. cocoa, coffee, rubber). Land under vines and trees and shrubs producing fruits, nuts and flowers, such as roses and jasmine, is so classified, as are nurseries (except those for forest trees, which should be classified under "forests and other wooded land").  Arable and permanent crop land is defined as the sum of arable area and land under permanent crops.  Permanent meadows and pastures refer to land used for five years or more to grow herbaceous forage crops, either cultivated or growing wild (wild prairie or grazing land).  Forest refers to land spanning more than 0.5 hectare (0.005 km2) and a canopy cover of more than 10 percent, or trees able to reach these thresholds in situ. This includes land from which forests have been cleared but that will be reforested in the foreseeable future. This excludes woodland or forest predominantly under agricultural or urban land use and used only for recreation purposes.

The Maritime Transport Costs (MTC)database contains data from 1991 to the most recent available year of bilateral maritime transport costs. Transport costs are available for 43 importing countries (including EU15 countries as a custom union) from 218 countries of origin at the detailed commodity (6 digit) level of the Harmonized System 1988. This dataset should only be used in conjunction with the paper Clarifying Trade Costs in Maritime Transport which outlines methodology, data coverage and caveats to its use. Key Statistical Concept Import charges represent the aggregate cost of all freight, insurance and other charges (excluding import duties) incurred in bringing the merchandise from alongside the carrier at the port of export and placing it alongside the carrier at the first port of entry in the importing country. Insurance charges are therefore included in the transport cost variables and are estimated to be approximately 1.5% of the import value of the merchandise.

These data refer to material resources, i.e. materials originating from natural resources that form the material basis of the economy: metals (ferrous, non-ferrous) non-metallic minerals (construction minerals, industrial minerals), biomass (wood, food) and fossil energy carriers. 

This dataset presents members' total use of the multilateral system i.e. both their multilateral aid ("Core contributions to") and bilateral aid channelled through ("Contributions through") multilateral organisations. These data originate from members' reporting at item-level in the CRS and are published here starting with 2011 data (item-level data for multilateral aid is not complete in CRS for earlier years).

Despite the growing importance of international trade, driven in large part by the rise of globalisation and the accompanying international fragmentation of production, the availability of statistics on price change in international merchandise trade at more graular level is still limited. To fill this data gap, the OECD has developed this new Merchandise Trade Price Index (MTPI) database using UN COMTRADE. The first release covers about 100 countries from 2011 to 2017. Indices by reporting country are available for both exports and imports, broken down by 30 products, aligned with the 2-digit level of the Classification of Products of Activity (CPA, version 2.1). Future releases are planned to expand the country coverage and the level of disaggregation.

Air pollution is considered one of the most pressing environmental and health issues across OECD countries and beyond. According to the World Health Organisation (WHO), exposure to fine particulate matter (PM2.5) and ground-level ozone (O3) have potentially the most significant adverse effects on health compared to other pollutants. PM2.5 can be inhaled and cause serious health problems including both respiratory and cardiovascular disease, having its most severe effects on children and elderly people. Exposure to PM2.5 has been shown to considerably increase the risk of heart disease and stroke in particular. For these reasons, population exposure to (outdoor or ambient) PM2.5 has been identified as an OECD Green Growth headline indicator. Exposure to ground-level ozone (O3) has serious consequences for human health, contributing to, or triggering, respiratory diseases. These include breathing problems, asthma and reduced lung function (WHO, 2016; Brauer et al., 2016). Ozone exposure is highest in emission-dense countries with warm and sunny summers. The most important determinants are background atmospheric chemistry, climate, anthropogenic and biogenic emissions of ozone precursors such as volatile organic compounds, and the ratios between different emitted chemicals.

This OECD inventory maps existing cross-country surveys that provide information on the characteristics of people's jobs. The information included in this inventory covers international surveys conducted since the early 1990s that are based on individuals' self-reported assessment of their current job, for 160 countries over 25 years. Survey questions are grouped into 19 indicators. For each indicator, binary codes (1 and 0) show whether indicators are available or not for the various countries and years. The inventory also provides users with detailed documentation on the questions used in the various surveys for measuring these indicators.

This table contains figures on the activity of affiliates located abroad by host country in the total manufacturing, total services and total business enterprise sectors. The units used to present data in AMNE are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

This dataset presents patent statistics and indicators that are suitable for tracking innovation in environment-related technologies. They allow the assessment of countries and firms' innovation performance as well as the design of governments' environmental and innovation policies.

The OECD Environment Directorate, in collaboration with the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in environment-related technologies. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' environmental and innovation policies. The patent statistics presented here are constructed using data extracted from the Worldwide Patent Statistical Database (PATSTAT) of the European Patent Office (EPO) using algorithms developed by the OECD. Consistent with other patent statistics provided in OECD.Stat, only published applications for "patents of invention" are considered (i.e. excluding utility models, petty patents, etc.). The relevant patent documents are identified using search strategies for environment-related technologies (ENV-TECH) which were developed specifically for this purpose. They allow identifying technologies relevant to environmental management, water-related adaptation and climate change mitigation. An aggregate category labelled "selected environment-related technologies" includes all of the environmental domains presented here.

The OECD Environment Directorate, in collaboration with the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in environment-related technologies. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' environmental and innovation policies. The patent statistics presented here are constructed using data extracted from the Worldwide Patent Statistical Database (PATSTAT) of the European Patent Office (EPO) using algorithms developed by the OECD. Consistent with other patent statistics provided in OECD.Stat, only published applications for "patents of invention" are considered (i.e. excluding utility models, petty patents, etc.). The relevant patent documents are identified using search strategies for environment-related technologies (ENV-TECH) which were developed specifically for this purpose. They allow identifying technologies relevant to environmental management, water-related adaptation and climate change mitigation. An aggregate category labelled "selected environment-related technologies" includes all of the environmental domains presented here.

This dataset presents activities in support of development from philanthropic foundations since 2009, including bilateral activities and core contributions to multilateral organisations. Bilateral activities from this dataset can also be found in the Creditor Reporting System (CRS) database. Collecting data on private philanthropy for development is work in progress, which may explain break in series for some foundations.

Data on government sector receipts, and on taxes in particular, are basic inputs to most structural economic descriptions and economic analyses and are increasingly used in international comparisons. This annual database presents a unique set of detailed and internationally comparable data on both tax and non-tax revenue in a common format for African countries participating in Revenue Statistics in Africa. Click to collapse Direct source Country representatives authorized to obtain revenue data from the appropriate government departments and responsible for compiling the data and preparing data tables that adhere to the OECD tax classification.

The SIGI is built on 27 innovative variables measuring discriminatory social institutions, which are grouped into 4 dimensions: discrimination in the family, restricted physical integrity, restricted access to productive and financial resources, and restricted civil liberties.Lower values indicate lower levels of discrimination in social institutions: the SIGI ranges from 0% for no discrimination to 100% for very high discrimination.

Survey on Monitoring the Paris Declaration. The dataset contains data as reported by donors and national co-ordinators in participating partner countries. The dataset includes all quantitative data collected through the 2006, 2008 and 2011 Surveys.

The OECD Sustainable Ocean Economy Database synthesizes available ocean-related datasets and indicators from across the Organisation to improve their discoverability and comparability. The database brings together relevant indicators from the Environment Directorate (ENV), the Trade and Agriculture Directorate (TAD), the Centre for Entrepreneurship, SMEs, Regions and Cities (CFE), the International Transport Forum (ITF), the International Energy Agency (IEA), and others.

This indicator reports the import-weighted applied tariffs on environmentally related goods as defined in the Combined List of Environmental Goods (CLEG) in percentage points for all countries between 2003 and 2016.

Official Development Financing (ODF), measured for recipient countries only, is defined as the sum of their receipts of bilateral ODA, concessional and non-concessional resources from multilateral sources, and bilateral other official flows made available for reasons unrelated to trade, in particular loans to refinance debt.

This indicator reports the amount of exports and imports of environmentally-related goods as defined in the Combined List of Environmental Goods (CLEG) in current USD for all countries between 2003 and 2016.

The indicator reports the amount of exports and imports of waste and scrap as defined in Kellenberg (2012) in current USD and in kilograms for all countries between 2003 and 2016.

Uranium is the raw material used to produce fuel for long-lived nuclear power facilities, necessary for the generation of significant amounts of baseload low-carbon electricity for decades to come. Although a valuable commodity, declining market prices for uranium in recent years, driven by uncertainties concerning the evolution in the use of nuclear power, have led to significant production cutbacks and the postponement of mine development plans in a number of countries and to some questions being raised about future uranium supply.

World Indicators of Skills for Employment (WISE) provide a comprehensive system of information relating to skills development. WISE presents countries with data upon which they can design skills policies and programs and monitor their impact on key outcomes, including responsiveness to current and emerging patterns of labour market demand, employability, productivity, health status, gender equity and lifelong learning.The database covers the period from 1990 to the present and consists of five inter-related domains of indicators:Contextual factors drive both the supply of and demand for skills.Skill acquisition covers investments in skills, the stock of human capital and its distribution.Skill requirements measure the demand for skills arising in the labour market.The degree of matching captures how well skills obtained through education and training correspond to the skills required in the labour market.Outcomes reflect the impact of skills on economic performance and employment and social outcomes.