Organisation for Economic Co-operation and Development

This dataset contains the main results of the 2017 Eurostat-OECD PPP comparison for the 49 countries that participated in the 2017 round of the Eurostat-OECD Purchasing Power Parity (PPP) Programme. Colombia and Costa Rica participated for the first time. Please note that time series for PPPs for GDP, actual individual consumption and household final consumption for these two countries in the National Accounts databases are still based on the 2011 ICP results until April 2020 (release of ICP 2017 results).

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilisers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilizers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

commitment is a firm written obligation by a government or official agency, backed by the appropriation or availability of the necessary funds, to provide resources of a specified amount under specified financial terms and conditions and for specified purposes for the benefit of a recipient country or a multilateral agency. Members unable to comply with this definition should explain the definition that they use. -- Commitments are considered to be made at the date a loan or grant agreement is signed or the obligation is otherwise made known to the recipient (e.g. in the case of budgetary allocations to overseas territories, the final vote of the budget should be taken as the date of commitment). For certain special expenditures, e.g. emergency aid, the date of disbursement may be taken as the date of commitment. -- Bilateral commitments comprise new commitments and additions to earlier commitments, excluding any commitments cancelled during the same year. Cancellations and reductions in the year reported on of commitments made in earlier years are reported in the CRS, but not in the DAC questionnaire. -- In contrast to bilateral commitments, commitments of capital subscriptions, grants and loans to multilateral agencies should show the sum of amounts which are expected to be disbursed before the end of the next year and amounts disbursed in the year reported on but not previously reported as a commitment. For capital subscriptions in the form of notes payable at sight, enter the expected amount of deposits of such notes as the amount committed.

Destination of Official Development Assistance Disbursements. Geographical breakdown by donor, recipient and for some types of aid (e.g. grant, loan, technical co-operation) on a disbursement basis (i.e. actual expenditures). The data cover flows from bilateral and multilateral donors which focus on flows from DAC member countries and the EU Institutions.

This dataset contains bilateral commitment data on aid in support of environment sustainability and aid to biodiversity, climate change mitigation, climate change adaptation and desertification from the Development Assistance Committee (DAC) Creditor Reporting System (CRS) database. In their reporting to the DAC CRS, donors are requested to indicate for each activity whether or not it targets environment and the Rio Conventions (biodiversity, climate change mitigation, climate change adaptation and desertification). A scoring system of three values is used, in which aid activities are "marked" as targeting environment as the "principal objective" or a "significant objective", or as not targeting the objective. The environment marker identifies activities that are "intended to produce an improvement in the physical and/or biological environment of the recipient country, area or target group concerned" or "include specific action to integrate environmental concerns with a range of development objectives through institution building and/or capacity development". A large majority of activities targeting the objectives of the Rio Conventions fall under the DAC definition of "aid to environment". The Rio markers permit their specific identification.

This dataset contains commitment data (since 2002) and disbursement data (since 2009) on aid in support of gender equality from the CRS database. In their reporting to the Development Assistance Committee (DAC) Creditor Reporting System (CRS), donors are requested to indicate for each activity whether or not it targets gender equality as one of its policy objectives. To qualify as “gender equality focussed,” an activity must explicitly promote gender equality and women’s empowerment. An activity can either target gender equality as its “principal objective” or as a “significant objective”. A “principal” score (2) is assigned if gender equality was an explicit objective of the activity and fundamental to its design - i.e. the activity would not have been undertaken without this objective. A “significant” score (1) is assigned if gender equality was an important, but secondary, objective of the activity - i.e. it was not the principal reason for undertaking the activity. A “not targeted” score (0) is assigned if, after being screened against the gender equality policy marker, an activity is not found to target gender equality. Activities assigned a “principal objective” score should not be considered better than activities assigned a “significant objective” score, as donors that mainstream gender equality - and thus integrate it into their projects across a range of sectors - are more likely to allocate the marker score “significant” to their aid activities. The gender equality marker allows an approximate quantification of aid flows that target gender equality as a policy objective. In marker data presentations the figures for principal and significant objectives should be shown separately and the sum referred to as the “estimate” or “upper bound” of gender equality-focussed aid. An activity can have more than one principal or significant objective. Therefore, total amounts targeting the different objectives should not be added-up to avoid double-counting. Policy markers seek information on the donor’s policy objectives which can be best assessed at the design stage of projects. This is why policy markers are applied to commitments. Policy marker data on a disbursement basis can also be compiled, but it is important to note that this does not mean the policy objectives of projects under implementation would have been re-assessed. Rather, the disbursements are linked to the qualitative information on the original commitment through project identifiers. Consequently, a project marked as gender equality focussed at the commitment stage will be flagged as gender equality focussed throughout its lifetime, unless the qualitative information was changed. Activity-level gender equality marker data that underlie the aggregate figures presented in this dataset are available for consultation and download: see “Export”, “Related files”.

This dataset describes the emissions to the atmosphere released as a result of production and consumption processes. The productive activities are broken down by economic activity and the household consumption activities are broken down by purpose (transport, heating, and other activities). Air emissions include emissions of individual greenhouse gases (GHG) as well as air pollutants such as sulphur dioxide, nitrogen oxides, and particulate matter. The emissions are also aggregated (using equivalence factors) to report on environmental pressures: global warming potential, acidifying gases and ozone precursors.

This database includes annual, quarterly and monthly information on carbon dioxide (CO2) emissions related to commercial passenger, freight, and general aviation flights, on both a territory and a residence basis, for 186 countries. These CO2 emissions are estimated by the OECD, based on a consistent methodology across countries. The main source used for the estimation of these CO2 emissions is a database compiled by the International Civil Aviation Organisation (ICAO) with all commercial passenger and freight flights around the world.

AITRAW = All in average income tax rates at average wage OECD Taxing Wages. Taxing Wages provides unique information on income tax paid by workers and social security contributions levied on employees and their employers in OECD countries. In addition, this annual publication specifies family benefits paid as cash transfers. Amounts of taxes and benefits are detailed program by program, for eight household types which differ by income level and household composition. Results reported include the marginal and effective tax burden for one- and two-earner families, and total labour costs of employers.

Residential Property Prices Indices (RPPIs) – also named House price indices (HPIs), are index numbers that measure the prices of residential properties over time. RPPIs are key statistics not only for citizens and households across the world, but also for economic and monetary policy makers. They can help, for example, to monitor potential macroeconomic imbalances and the risk exposure of the household and financial sectors. This dataset covers the 34 OECD member countries and some non-member countries. In addition to the nominal RPPIs it contains information on real house prices, rental prices and the ratios of nominal prices to rents and to disposable household income per capita. This dataset contains quarterly statistics for each country. House prices differ widely across OECD countries, both with respect to recent changes and to valuation levels. The OECD has identified one main nominal index for each country that covers the prices for the sale of newly-built and existing dwellings. The datasets “Analytical house price indicators” and “Residential Property Price Indices (RPPIs) – Headline Indicators” refer to the same price indices for all countries apart from Brazil, Canada, China, the United States and the Euro area. These differences are further documented in country-specific metadata. For the United States, the series used in “Analytical house price indicators” is included in the dataset called “Residential Property Price Indices (RPPIs) – Complete database”, but is not the headline indicator. For all other countries, non-seasonally adjusted price indices in both datasets are identical in the period in which they overlap. This research dataset provides extended time series coverage for many countries. The objective is to provide information on the long term trend of house prices and develop indicators which can be used to help track and analyse macroeconomic developments and risks. The extended data supplement the OECD RPPI data with historical data from a variety of sources, including other international organisations, central banks and national statistical offices. The methodological basis on the historical data and the types of geographical areas and dwellings they cover can differ from those used in the OECD RPPI data. The database contains a number of additional series. Real house prices are given by the ratio of seasonally adjusted nominal house prices to the seasonally adjusted consumers’ expenditure deflator in each country, from the OECD national accounts database. This provides information on how nominal house prices have changed over time relative to prices in the general economy. The rental prices come from the OECD Main Economic Indicators database and refer to Consumer Price Indices (CPIs) for Actual rentals for housing (COICOP 04.1). If this indicator is missing for a country, another indicator is chosen. The chosen indicator are usually those corresponding to the CPI aggregate for Housing including Actual rentals for housing (COICOP 04.1), imputed rentals for housing (COICOP 04.2) and Maintenance and repair of the dwelling (COICOP 04.3). The disposable income indicators come from the OECD national accounts database. Net household disposable income is used. The population data come from the OECD national accounts database. The price-to-rent ratio is given by the ratio of nominal house prices to rental prices. This is a measure of the profitability of owning a house. The price-to-income ratio is given by the ratio of nominal house prices to nominal household disposable income per capita. This is a measure of the affordability of purchasing a house. An indication that house prices may be overvalued is provided if either of these ratios is above their long-term averages. The standardised price-rent and price-income ratios show the current price-rent and price-income ratios relative to their respective long-term averages. The long-term average, which is used as a reference value, is calculated over the whole period available when the indicator begins after 1980 or 1980 if the indicator is available over a longer time period. The standardised ratio is indexed to a reference value equal to 100 over the full sample period. Values over 100 indicate that the present price-rent ratio, or price-income ratio, is above its long-run norms. This provides an indication of possible housing market pressures.

The “ALFS Summary tables” dataset is a subset of the Annual Labour Force Statistics database which presents annual labour force statistics and broad population series for 34 OECD member countries plus Brazil, Columbia and Russian Federation and 4 geographical areas (Major Seven, Euro area, European Union and OECD-Total). Data are presented in thousands of persons, in percentage or as indices with base year 2010=100. This dataset contains estimates from the OECD Secretariat for the latest years when countries did not provide data. These estimates are necessary to compile aggregated statistics for the geographical areas for a complete span of time. Since 2003, employment data by sector for the United States are compiled following the North American Industrial Classification System (NAICS); therefore they are not strictly comparable with other countries’ data. Euro area and European Union data were extracted from Eurostat (LFS Series, Detailed annual survey results in New Cronos). Euro area refer to Euro area with 17 countries (geo = ea17). European Union refers to European Union with 27 countries (geo = eu27).

Annual Purchasing Power Parities and exchange rates: This table shows annual Purchasing Power Parities (PPPs) for Gross Domestic Product (GDP), household final consumption expenditure and actual individual consumption. It also shows exchange rates (annual averages and end of period), sourced from the International Monetary Fund's database on International Financial Statistics.

Data source used: The aquaculture production data collection is part of the more comprehensive data gathering carried out on an annual basis by the Fisheries Committee (COFI) of the Trade and Agriculture Directorate (TAD) from OECD members and participating non-OECD economies. Data on marine landings, aquaculture production, inland fisheries catch, fleet, employment, total allowable catch (TAC) and fisheries support estimate (FSE) are collected from Fisheries Ministries, National Statistics Offices and other institutions designated as an official data source. The surveys used for this exercise are the OECD Fisheries questionnaires.

The concept used is the total number of hours worked over the year divided by the average number of people in employment. The data are intended for comparisons of trends over time; they are unsuitable for comparisons of the level of average annual hours of work for a given year, because of differences in their sources. Part-time workers are covered as well as full-time workers. The series on annual hours actually worked per person in total employment presented in this table for all 34 OECD countries are consistent with the series retained for the calculation of productivity measures in the OECD Productivity database (www.oecd.org/statistics/productivity/compendium). However, there may be some differences for some countries given that the main purpose of the latter database is to report data series on labour input (i.e. total hours worked) and also because the updating of databases occur at different moments of the year. Hours Hours actually worked per person in employment are according to National Accounts concepts for 18 countries: Austria, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Korea, the Netherlands, Norway, the Slovak Republic, Spain, Sweden, Switzerland and Turkey. OECD estimates for Belgium, Ireland, Luxembourg and Portugal for annual hours worked are based on the European Labour Force Survey, as are estimates for dependent employment only for Austria, Estonia, Greece, the Slovak Republic and Slovenia. The table includes labour-force-survey-based estimates for the Russian Federation.countries: For further details and country specfic notes see: www.oecd.org/employment/outlook and www.oecd.org/employment/emp/ANNUAL-HOURS-WORKED.pdf

This dataset contains data on average annual wages per full-time and full-year equivalent employee in the total economy.  Average annual wages per full-time equivalent dependent employee are obtained by dividing the national-accounts-based total wage bill by the average number of employees in the total economy, which is then multiplied by the ratio of average usual weekly hours per full-time employee to average usually weekly hours for all employees.   Average wages are converted in USD PPPs using 2017 USD PPPs for private consumption and are deflated by a price deflator for private final consumption expenditures in 2017 prices.   Real compensation per employee (instead of real wages) are considered for Chile, Iceland, Mexico and New Zealand.

This dataset presents the average number of students in a class by type of institution.

This table contains data on the average duration of unemployment by sex and standardised age groups (15-19, 15-24, 20-24, 25-54, 55+, total). Data are expressed in months.

The average effective age of retirement is calculated as a weighted average of (net) withdrawals from the labour market at different ages over a 5-year period for workers initially aged 40 and over. In order to abstract from compositional effects in the age structure of the population, labour force withdrawals are estimated based on changes in labour force participation rates rather than labour force levels. These changes are calculated for each (synthetic) cohort divided into 5-year age groups. The estimates shown in red are less reliable as they have been derived from interpolations of census data rather than from annual labour force surveys. The estimates for women in Turkey are based on 3-yearly moving averages of participation rates for each 5-year age group. OECD estimates based on the results of national labour force surveys, the European Union Labour Force Survey and, for earlier years in some countries, national censuses.

The balance of payments is a statistical statement that provides a systematic summary of economic transactions of an economy with the rest of the world, for a specific time period. The transactions are for the most part between residents and non-residents of the economy. A transaction is defined as an economic flow that reflects the creation, transformation, exchange, transfer, or extinction of economic value and involves changes in ownership, of goods or assets, the provision of services, labour or capital.  This dataset presents countries compiling balance of payments statistics in accordance with the 6th edition of the Balance of Payments and International Investment Position Manual published by the IMF (BPM6). Transactions include: the goods and services accounts, the primary income account (income account in BPM5), the secondary income account (transfers in BPM5), the capital account, and the financial account. Changes in BPM6 compared to BPM5 are often a consequence of a stricter application of the change of ownership principle in particular in the goods and services accounts. They relate to transactions on goods and services (merchanting, goods for processing, Insurance), income (investment income), and financial operations (direct investment) .

Since the collection of 2009 data, the scope of the OECD Global Insurance Statistics questionnaire has been expanded. These changes led to the collection of key balance sheet and income statement items for direct insurance and reinsurance sectors, such as: gross claims paid, outstanding claims provision (changes), gross operating expenses, commissions, total assets, gross technical provisions (of which: unit-linked), shareholder equity, net income.

This dataset present the Balanced Trade in Services (BaTIS) dataset published by OECD. It is a complete, consistent and balanced matrix of international trade in services statistics (ITSS). It contains annual bilateral data covering 202 reporters and partners, broken down by the 12 main EBOPS2010 (BPM6) categories.

There is more to life than the cold numbers of GDP and economic statistics. This dataset contains the 2018 data of the Better Life Index which allows you to compare well-being across countries as well as measuring well-being, based on 11 topics the OECD has identified as essential, in the areas of material living conditions and quality of life. Abstract: Your Better Life Index aims to involve citizens in the debate on measuring the well-being of societies, and to empower them to become more informed and engaged in the policy-making process that shapes all our lives. Each of the 11 topics of the Index is currently based on one to three indicators. Within each topic, the indicators are averaged with equal weights. The indicators have been chosen on the basis of a number of statistical criteria such as relevance (face-validity, depth, policy relevance) and data quality (predictive validity, coverage, timeliness, cross-country comparability etc.) and in consultation with OECD member countries. These indicators are good measures of the concepts of well-being, in particular in the context of a country comparative exercise. Other indicators will gradually be added to each topic.  Notes: Data cannot be compared between different editions of the Better Life Index. For more information on change over time, please contact [email protected].

This dataset presents a set of bibliometric indicators calculated using Elsevier's Scopus Custom Data, Version 5.2019; and Scimago Journal Rankings are used to calculate the top 10% most cited scientific publications.Elsevier assigns each journal in Scopus to one or more subjects using its All Science and Journal Classification (ASJC). There are 27 main fields comprising 334 subjects in the classification.This dataset is a small sample of the bibliometric indicators calculated using the Scopus Database. Different indicators will be presented in the Scoreboard platform (forthcoming).The following indicators are presented:FPUBS_NBFRAC: Total number of scientific publications, fractional counts. Publications are attributed to countries on the basis of the authors' institutional affiliations. Publications were fractionalised by contributing units; so that reported figures add up to the total number of publications (each document has the same weight). Fractional counts can be aggregated.TOP10FPUBS_NBFRAC: Total number of 10% top-cited scientific publications, fractional counts. The top 10% most cited documents is an indicator of excellence. This rate indicates the amount (in percentages) of a unit's scientific output that is included into the group of the 10% of the most cited papers in their respective scientific fields. It is a measure of high quality of research output of a unit, in this case the country. The indicator of scientific excellence is calculated at the document level using fractional counts. Documents organized by document type, ASJC field and year - are sorted in descending order based on the number of citations received. A threshold of 10% most cited documents is calculated for each category. Only documents with a fixed number of citations above the threshold are included. Documents with the same number of citations as the threshold are sorted according to the Scimago Journal Rankings (SJR) value of the journal in which they were published; those with the highest scores are selected. The citation window is based on the whole period, so top 10% most cited documents for the reference year uses whole period citations. No citation window is imposed as citation-based indicators are calculated on the basis of comparisons with documents published in the same year. The world average is 10% for the period.TOP10_X: The top 10% most cited documents is an indicator of excellence. This rate indicates the amount (in percentages) of a unit's scientific output that is included into the group of the 10% of the most cited papers in their respective scientific fields. The world average is 10% for the period.INTL_X: Percentage of scientific publications involving international collaboration. International collaboration refers to publications co-authored among institutions in different countries. Estimates are computed for each country by counting documents for which the set of listed affiliations includes at least one address within the country and one outside. Single-authored documents with multiple affiliations in different countries count as international collaboration.ISCORR_X: Percentage of corresponding/leading author scientific publications. Percentage corresponding or leading author documents, i.e. the share of scientific output where a domestic author is listed as a corresponding author. The scientific leadership indicator helps interpret the role of a given country in collaboration activities. The scientific leadership indicator shows the share of scientific output (in this case, documents by authors from a given country) where an author from this country is listed as leading author.NORMCIT_X: Normalised citation score, ratio of actual versus expected publications, percentage. Because of the differences in citation patterns of the fields and document types, field-based normalisation is required. The measure of normalised citation impact shows the relationship of the unit's average citation to the world's average, the unit is the country. The indicator is derived as the ratio between the average number of citations received by the documents published by authors affiliated to an institution in a given country and the world average of citations, over the same time period, by document type and subject area. Its value indicates how many times above (or below) the document has been cited above (or below) world average. For example, a value of 80 means the country is cited 20% below world average in that field and 130 means the country is cited 30% above average for that domain. The normalisation of citation values is item-oriented, i.e. carried out at the level of the individual document. If an article has been published in a journal allocated to more than one subject area, a mean value of the areas is calculated. The world average is 100.SPEC_I: The Relative Specialisation Index measures relative specialisation. This index is calculated by dividing all papers in a field from country a by the total production in all fields for country a, this proportion is then divided by the same proportion calculated at the world level. The world average is 1. A threshold has been set and the index has only been calculated for countries with 50 or more documents.

STAN Bilateral Trade Database by Industry and End-use category (BTDIxE) provides values of imports and exports (as well as re-imports and re-exports) of goods broken down by industrial sectors and by end-use categories. BTDIxE was designed to extend the old BTD database which provided bilateral trade in goods by industry only.  BTDIxE allows, for example, insights into the patterns of trade in intermediate goods between countries to track global production networks and supply chains, and it helps to address policy issues such as trade in value added and trade in tasks.  The database presents estimates of bilateral flows of goods from 1990 to the latest available year, i.e. 2018; the latest year shown is subject to the availability of underlying product-based annual trade statistics.  Reporters are the OECD member countries and a large number of non-OECD economies, including the BRIICS: Brazil, the Russian Federation, India, Indonesia, People's Republic of China and South Africa; other selected G20 and Asian economies; and major African and Latin American nations.  It should be noted that starting from mid-2012, the OECD and the United Nations agreed to centralise the data collection and processing procedures within UNSD Comtrade.  The list of partners covers the OECD countries, more than a hundred of non-member economies as well as the partners "World", "Rest of the World" and "Unspecified". The partner "Total foreign trade" corresponds to the flows with partner "World" excluding intra-country flows. Trade flows are divided into economic activities based on the Revision 4 of ISIC and nine end-use categories including capital goods, intermediate goods and household consumption.

The OECD broadband database provides access to a range of broadband-related statistics gathered by the OECD. Policymakers must examine a range of indicators which reflect the status of individual broadband markets in the OECD. Source - https://www.oecd.org/digital/broadband/broadband-statistics/

The OECD broadband portal provides access to a range of broadband-related statistics gathered by the OECD. Policy makers must examine a range of indicators which reflect the status of individual broadband markets. The OECD broadband speed tests by country show the official measurements of actual access network broadband speed. The OECD broadband map shows national broadband statistics in OECD countries. Mobile broadband penetration has risen to 85.4% in the OECD area, meaning more than four wireless subscriptions for every five inhabitants, according to data for June 2015 released by the OECD .

The business tendency survey indicators cover a standard set of indicators for four economic sectors: manufacturing, construction, retail trade and other services. This includes an indicator of overall business conditions or business confidence in each sector. The consumer opinion survey indicators cover a restricted set of indicators on consumer confidence, expected economic situation and price expectations.   Business and consumer opinion (tendency) surveys provide qualitative information that has proved useful for monitoring the current economic situation. Typically they are based on a sample of enterprises or households and respondents are asked about their assessments of the current situation and expectations for the immediate future. For enterprise surveys this concerns topics such as production, orders, stocks etc. and in the case of consumer surveys their intentions concerning major purposes, economic situation now compared with the recent past and expectations for the immediate future. Many survey series provide advance warning of turning points in aggregate economic activity as measured by GDP or industrial production. Such series are known as leading indicators in cyclical analysis. These types of survey series are widely used as component series in composite leading indicators.   The main characteristic of these types of surveys is that instead of asking for exact figures, they usually ask for the direction of change e.g. a question on tendency by reference to a “normal” state, e.g. of production level. Possible answers are generally of the three point scale type e.g. up/same/down or above normal/normal/below normal for enterprise surveys and of the five point scale type e.g. increase sharply/increase slightly/remain the same/fall slightly/fall sharply for consumer surveys. In presenting the results as a time series, only the balance is shown. That is “same” or “normal” answers are ignored and the balance is obtained by taking the difference between percentages of respondents giving favourable and unfavourable answers.   Virtually all business tendency and consumer opinion survey data are presented as time series of balances in this dataset, either in raw or seasonally adjusted form. Very few series are presented as indices, and where these exist they have generally been converted from underlying balances by countries before submitting the data to the OECD.

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Business written in the reporting country on a gross and net premium basis. It contains a breakdown between domestic companies, foreign-controlled companies and branches and agencies or foreign companies.

OECD Indicators on Carbon dioxide (CO2) emissions embodied in international trade (TeCO2) are derived by combining the 2021 editions of OECD Inter-Country Input-Output (ICIO) Database and of International Energy Agency (IEA) statistics on CO2 emissions from fuel combustion. In this release of TeCO2, emissions from fuels used for international aviation and maritime transport (i.e. aviation and marine bunkers) are also considered.Production-based CO2 emissions are estimated by allocating the CO2 emissions to the 45 target industries in OECD ICIO and, to household final consumption of fuels, by both residents and non-residents.Demand-based CO2 emissions are calculated by multiplying the intensities of the production-based emissions (c) with the global Leontief inverse (I-A)(-1) and global final demand matrix (Y) from OECD ICIO, taking the column sums of the resulting matrix and adding residential and private road emissions (FNLC), i.e. direct emissions from final demand: colsum [ diag(c) (I-A)(-1) Y ] + FNLC.For more information, see TeCO2 web page: http://oe.cd/io-co2.

This indicator reports the amount of carbon emissions from fossil fuel combustion embodied in imports and exports in mega tonnes of CO2 (MtCO2) for 63 countries and 34 industries between 1995 and 2011.

The indicator reports the hypothetical amount of carbon emissions from fossil fuel combustion embodied in imports if imported goods were produced with a carbon intensity (i.e. emissions factors) equal to that of the importing country at a given time – the Equal Carbon Intensity (ECI) assumption. It covers 65 countries and 34 industries between 1995 and 2011.

CGPITRT: Central government personal income tax rates and threshold   This table reports statutory central government personal income tax rates for wage income plus the taxable income thresholds at which these statutory rates apply. The table also reports basic/standard tax allowances, tax credits and surtax rates. The information is applicable to a single person without dependents. The threshold, tax allowance and tax credit amounts are expressed in national currencies Tapered means that the tax relief basic amount is reduced with increasing income Further explanatory notes may be found in the Explanatory Annex This data represents part of the data presented within the Excel file “Personal income tax rates and thresholds for central governments - Table I.1”. The Data for 1981 to 1999 is not included here within as not all the data for these years is either available, or can be verified. The OECD tax database provides comparative information on a range of tax statistics - tax revenues, personal income taxes, non-tax compulsory payments, corporate and capital income taxes and taxes on consumption - that are levied in the 34 OECD member countries.” Tax policy Analysis homepage OECD Tax Database Taxing Wages Dissemination format(s) This data is also presented through the OECD Tax database webpage. OECD Tax Database

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Commissions in the reporting country, containing a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

Statistical population: CLIs are calculated for 33 OECD countries (Iceland is not included), 6 non-member economies and 8 zone aggregates. A country CLI comprises a set of component series selected from a wide range of key short-term economic indicators.   CLIs, reference series data (see below) and standardised business and consumer confidence indicators are presented in various forms.   Recommended uses and limitations: The composite leading indicator is a times series, formed by aggregating a variety of component indicators which show a reasonably consistent relationship with a reference series (e.g. industrial production IIP up to March 2012 and since then the reference series is GDP) at turning points. The OECD CLI is designed to provide qualitative information on short-term economic movements, especially at the turning points, rather than quantitative measures. Therefore, the main message of CLI movements over time is the increase or decrease, rather than the amplitude of the changes. The OECD’s headline indicator is the amplitude adjusted CLI. In practice, turning points in the de-trended reference series have been found about 4 to 8 months (on average) after the signals of turning points had been detected in the headline CLI.

This dataset provides information on the level of public equipment installed by countries to managed and abate water pollution. It shows the percentage of national population connected to "public" sewerage networks and related treatment facilities, and the percentage of national population connected to "public" wastewater treatment plants, and the degree of treatment. Connected here means actually connected to a wastewater plants through a public sewage network. When analysing these data, it should be kept in mind that the optimal connection rate is not necessarily 100%. It may vary among countries and depends on geographical features and on the spatial distribution of habitats. The interpretation of those data should take into account some variations in countries' definitions, as reflected in metadata. Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)

The 'Consumer Price Indices (CPIs)' contains all data that was previously contained in three different datasets: 'Consumer Prices', 'National Consumer Price Indices (CPIs) by COICOP divisions' and 'Harmonised Indices of Consumer Prices (HICPs) by COICOP divisions'. The 'Consumer Price Indices (CPIs)' dataset contains predominantly monthly statistics, and associated statistical methodological information, for the 36 OECD member countries and for some non-member countries. The ‘Consumer Price Indices (CPIs)' dataset contains statistics on Consumer Price Indices including national CPIs, Harmonised Indices of Consumer Prices (HICPs) and their associated weights and contributions to national annual inflation. The data series presented have been chosen as the most relevant prices statistics for which comparable data across countries is available. In all cases, a lot of effort has been made to ensure that the data are internationally comparable across all countries presented and that all the subjects have good historical time-series’ data to aid with analysis. Data are available monthly for all the countries except for Australia and New Zealand (quarterly data).

Note: CPA data for 2018 and 2019 are projections from the 2016 Survey on Forward Spending Plans. Country Programmable Aid (CPA), outlined in our Development Brief  and also known as “core” aid, is the portion of aid donors programme for individual countries, and over which partner countries could have a significant say. CPA is much closer than ODA to capturing the flows of aid that goes to the partner country, and has been proven in several studies to be a good proxy of aid recorded at country level. CPA was developed in 2007 in close collaboration with DAC members. It is derived on the basis of DAC statistics and was retroactively calculated from 2000 onwards

The country statistical profiles provide a broad selection of indicators, illustrating the demographic, economic, environmental and social developments, for all OECD members. The dataset also covers the five key partner economies with which the OECD has developed an enhanced engagement program with (Brazil, China, India, Indonesia and South Africa) ,accession countries (Colombia, Costa Rica and Lithuania) , Peru and the Russian Federation. The user can easily compare indicators across all countries. Total fertility rates - Unit of measure used: Number of children born to women aged 15 to 49

The objective of the CRS Aid Activity database is to provide a set of readily available basic data that enables analysis on where aid goes, what purposes it serves and what policies it aims to implement, on a comparable basis for all DAC members. Data are collected on individual projects and programmes. Focus is on financial data but some descriptive information is also made available.

This dataset contains three earnings-dispersion measures - ratio of 9th-to-1st, 9th-to-5th and 5th-to-1st - where ninth, fifth (or median) and first deciles are upper-earnings decile limits, unless otherwise indicated, of gross earnings of full-time dependent employees. The dataset also includes series on: the incidence of low-paid workers defined as the share of full-time workers earning less than two-thirds of gross median earnings of all full-time workers; the incidence of high of high-paid workers defined as the share of full-time workers earning more than one-and-half time gross median earnings of all full-time workers; gender wage gap unadjusted and defined as the difference between median wages of men and women relative to the median wages of men.

This dataset traces net changes in terms of volume in the growing stock of standing wood on forest land. Forest depletion and growth describe balances or imbalances in different types of forests. The intensity of use of forest resources reflects various forest management methods and their sustainability. These data should be read in connection with other indicators, in particular land use changes and forest quality (species diversity, forest degradation), and be complemented with data on forest management practices and protection measures. Please bear in mind that definitions and estimation methods vary for some countries.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business datawhere composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Click to collapse Item coverage Outstanding investment by direct insurance companies, classified by investment category, by the companies' nationality and by its destination (domestic or foreign). As of 2009, investment data exclude assets linked to unit-linked products sold to policyholders.

The OECD Digital STRI identifies, catalogues and quantifies barriers that affect trade in digitally enabled services across 46 countries. It provides policy makers with an evidence-based tool that helps to identify regulatory bottlenecks, design policies that foster more competitive and diversified markets for digital trade, and analyze the impact of policy reforms. The OECD Digital STRI captures cross-cutting impediments that affect all types of services traded digitally. As a stand-alone instrument, it complements the OECD Services Trade Restrictiveness Index (STRI).   STRI indices take the value from 0 to 1. Complete openness to trade and investment gives a score of zero, while being completely closed to foreign services providers yields a score of one.

The OECD Digital STRI heterogeneity indices complement the recently published Digital STRI's and presents indices of regulatory heterogeneity based on the rich information in the Digital STRI regulatory database. The indices are built from assessing – for each country pair and each measure – whether or not the countries have the same regulation. For each country pair and each sector, the indices reflect the (weighted) share of measures for which the two countries have different regulation.

Graduates/new entrants in each educational field as a percentage of the sum of graduates/new entrants in all fields.

Distribution of teachers by gender and different age groups.

There has been a growing interest in monitoring patterns of trade in services around the world, which is partly associated with ongoing trade negotiations and partly due to the increasing importance of services in OECD economies. It has been developed to supplement other OECD publications on trade in services to address the data needs of trade analysts. It is also an important part of OECD's programme to facilitate the implementation of the recommendations of the revised Manual on Statistics of International Trade in Services 2010.Other commentsThe Task Force on Statistics of International Trade in Services maintains a matrix summarising the status of the trade in services data collection performed by International Organisations. The table displays links to the databases as well as update timetables, availability of metadata, availability of bilateral data, and other important characteristics.

Latest Version is available here: https://knoema.com/OECDEO2020DEC/economic-outlook-no-108-december-2020   Economic Outlook No 107 (EO107) 2/2   Given the unusual level of uncertainty caused by the Covid-19 pandemic, this Economic Outlook (EO107) presents two scenarios for each country and economy – one scenario in which a second outbreak occurs in most economies towards the end of this year (double-hit scenario) and an alternative scenario where the second outbreak is avoided (single-hit scenario).Furthermore, only a limited number of series is made available compared to past editions.   This data set presents the double-hit scenario.   The OECD Economic Outlook analyses the major economic trends over the coming 2 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in selected non-OECD economies are also evaluated in detail. Each edition of the Outlook provides a unique resource to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labour markets, interest and exchange rates, balance of payments, and government debt. For the non-OECD regions, foreign trade and current account series are available.   The database contains annual data (for all variables) and quarterly figures (for a subset of variables). Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD data bases such as Quarterly National Accounts, Annual National Accounts, Labour Force Statistics and Main Economic Indicators. The cut-off date for information used in the compilation of the projections was the 4 June 2020.   Concerning the aggregation of world trade, a new composition has been introduced, since projections are now made for the major non-OECD economies. Thus, besides OECD and the OECD euro area, the following new regions are available: Dynamic Asian Economies (Chinese Taipei, Hong Kong, Malaysia, the Philippines, Singapore, Thailand, Vietnam); Oil Producers (Azerbaijan, Kazakhstan, Turkmenistan, Brunei, Timor-Leste, Bahrain, Iran, Iraq, Kuwait, Libya, Oman, Qatar, Saudi Arabia, United Arab Emirates, Yemen, Ecuador, Trinidad and Tobago, Venezuela, Algeria, Angola, Chad, Rep. of Congo, Equatorial Guinea, Gabon, Nigeria, Sudan); with the remaining countries in a residual 'Rest of the World' group.

Latest version is available here: https://knoema.com/OECDEO2020DEC/economic-outlook-no-108-december-2020   Economic Outlook No 107 (EO107) 1/2   Given the unusual level of uncertainty caused by the Covid-19 pandemic, this Economic Outlook (EO107) presents two scenarios for each country and economy – one scenario in which a second outbreak occurs in most economies towards the end of this year (double-hit scenario) and an alternative scenario where the second outbreak is avoided (single-hit scenario).Furthermore, only a limited number of series is made available compared to past editions.   This data set presents the single-hit scenario.   The OECD Economic Outlook analyses the major economic trends over the coming 2 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in selected non-OECD economies are also evaluated in detail. Each edition of the Outlook provides a unique resource to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labour markets, interest and exchange rates, balance of payments, and government debt. For the non-OECD regions, foreign trade and current account series are available.   The database contains annual data (for all variables) and quarterly figures (for a subset of variables). Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD data bases such as Quarterly National Accounts, Annual National Accounts, Labour Force Statistics and Main Economic Indicators. The cut-off date for information used in the compilation of the projections was the 4 June 2020.   Concerning the aggregation of world trade, a new composition has been introduced, since projections are now made for the major non-OECD economies. Thus, besides OECD and the OECD euro area, the following new regions are available: Dynamic Asian Economies (Chinese Taipei, Hong Kong, Malaysia, the Philippines, Singapore, Thailand, Vietnam); Oil Producers (Azerbaijan, Kazakhstan, Turkmenistan, Brunei, Timor-Leste, Bahrain, Iran, Iraq, Kuwait, Libya, Oman, Qatar, Saudi Arabia, United Arab Emirates, Yemen, Ecuador, Trinidad and Tobago, Venezuela, Algeria, Angola, Chad, Rep. of Congo, Equatorial Guinea, Gabon, Nigeria, Sudan); with the remaining countries in a residual 'Rest of the World' group.

The OECD Economic Outlook analyses the major economic trends over the coming 2 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in major non-OECD economies are also evaluated in detail. Each edition of the Outlook provides a unique resource to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labour markets, interest and exchange rates, balance of payments and government debt. For the non-OECD regions, foreign trade and current account series are available. Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD data bases such as Quarterly National Accounts, Annual National Accounts, Labour Force Statistics and Main Economic Indicators. The cut-off date for information used in the compilation of the projections was June 1, 2023. The aggregation of world trade takes into account the projections made for the main non-OECD economies. Thus, besides OECD and the OECD euro area, the following regions are available: Dynamic Asian Economies (Chinese Taipei, Hong Kong, Malaysia, the Philippines, Singapore, Thailand, Vietnam); Oil Producers (Algeria, Angola, Azerbaijan Bahrain, Brunei, Chad, Rep. of Congo, Ecuador, Equatorial Guinea, Gabon, Iran, Iraq, Kazakhstan, Kuwait, Libya, Nigeria, Oman, Qatar, Saudi Arabia, Sudan, Timor-Leste, Trinidad and Tobago, Turkmenistan, United Arab Emirates, Yemen, Venezuela); with the remaining countries in a residual 'Rest of the World' group.

The data presented in this table are addressing one of the seven quality of life dimensions that have been identified within the framework of Education and Social Outcomes. The seven dimensions are: Health status, Work-life balance, Social connections, Civic engagement and governance, Environment, Personal safety and Subjective well-being.

This dataset presents internationally comparable data on education and earnings, by educational attainment, age and gender as published in OECD Education at a Glance 2022. For trend data, Education at a Glance 2022 includes data for 2005 and 2010-2020 (or years with available data).

This indicator presents internationally comparable data regarding the labour force status and the educational attainment level by the National Educational Attainment Categories (NEAC) as reported by the labour force survey (LFS) and published in OECD Education at a Glance 2017. For trend data, the Education at a Glance Database includes data from 1981 to 2016 (or years with available data).

The nature of expenditure distinguishes between current and capital expenditure. The resource category refers to service provider (public institutions, government-dependent private institutions, and independent private institutions, i.e. both educational and other institutions). These expenditure figures are intended to represent the total cost of services provided by each type of institution, without regard to sources of funds (whether they are public or private).

All entities that provide funds for education, either initially or as final payers, are classified as either governmental (public) sources or non-governmental (private) sources, the sole exception being "international agencies and other foreign sources", which are treated as a separate category. There are three types of financial transactions: Direct expenditure on educational institutions; Transfers to students or households and to other private entities; and Households' expenditure on education outside educational institutions.

These indicators on expenditure on education are published in chapter C of Education at a Glance, which covers financial and human resources invested in education.They are either policy levers or provide context information on education systems, or sometimes both. For example, expenditure per student is a key policy measure that most directly affects the individual learner, as it acts as a constraint on the learning environment in schools and learning conditions in the classroom.The data set “educational finance indicators” provides the main indicators computed for three levels of education : primary, secondary and post-secondary non-tertiary levels combined; tertiary level; and primary to tertiary levels combined. Other datasets provide more breakdowns for each specific indicator.

Average number of teachers by sex and age.

This dataset provides selected information on national emissions of air pollutants: man-made emissions of sulphur oxides (SOx), nitrogen oxides (NOx), particulate matter (PM), carbon monoxide (CO) and volatile organic compounds (VOC). Categories presented are based on the NFR (nomenclature for reporting) 2014 classification. 

Compared to men, women are less likely to work full-time, more likely to be employed in lower-paid occupations, and less likely to progress in their careers. As a result gender pay gaps persist and women are more likely to end their lives in poverty. This data looks at how many men and women are in paid work, who works full-time, and how having children and growing older affect women’s work patterns and earnings differently to men’s. It looks at how women bear the brunt of domestic and family responsibilities, even when working full-time. It also considers the benefits for businesses of keeping skilled women in the workplace, and encouraging them to sit on company boards. It looks at women’s representation in parliaments, judicial systems, and the senior civil service. It examines male and female employment in the wake of the crisis, and how women tend to be confined to the most vulnerable categories within the informal sector in developing countries.

Employment, participation rates: population aged 15-64; Unemployment rate: active population aged 15-64.   Rates as defined by the International Labour Organization.

This dataset contains the tenure composition (as a percentage of all job tenures). Data are broken down by professional status - employees and total employment - sex, five-year and broad age groups (15-24, 25-54, 55-64, 15-64, total, etc.). Geographic coverageIn order to facilitate analysis and comparisons over time, historical data for OECD members have been provided over as long a period as possible, often even before a country became a member of the Organisation. Information on the membership dates of all OECD countries can be found at OECD Ratification Dates.

Job tenure is measured by the length of time workers have been in their current or main job or with their current employer. This information is valuable for estimating the degree of fluidity in the labour market and in identifying the areas of economic activity where the turnover of labour is rapid or otherwise. Data are so far reported for a number of European countries and will be expanded to cover a greater number of countries.

This table contains data on permanent and temporary workers based on the type of work contract of their main job. Data are further broken down by professional status - employees, total employment - by sex and by standardised age groups (15-19, 15-24, 20-24, 25-54, 55-64, 65+, total). Unit of measure used - Data are expressed in thousands of persons.

The Fisheries Committee (COFI) from the Trade and Agriculture Directorate (TAD) collects, on an annual basis from all its participating countries, data on landings, aquaculture production, fleet, employment in the fisheries sector, and government financial transfers. Data are collected from Fisheries Ministries, National Statistics Offices and other institution designated as an official data source. Concepts Classifications Data are collected by the OECD using the methodologies established by the Coordinating Working Party on Fishery Statistics (CWP) (www.fao.org/fishery/cwp/search/en). This inter-agency body, created in 1960 to develop common procedures and standards for the collation of fisheries statistics, provides technical advice on fishery statistical matters. Its handbook of Fishery Statistical Standards comprises definitions of the various concepts used in fishery statistics, with the exception of Government Financial Transfers which is unique to the OECD. All other statistics are based on the CWP definitions. The OECD, a partner with the CWP, additionally collects information on values for its landings and records the breakdown between the types of landings (i.e. landings in domestic ports, landings in foreign ports) data series which are not collected by the FAO. While a number of countries cover landings in a similar fashion, the same does not hold true for capacity (feet/meters, GRT/engine powers), or for employment for which both Full-time equivalents or numbers of people are used. The OECD therefore does not duplicate FAO statistics but requests complementary information to feed its analytical work.

Number of students by level of education, adjusted to the financial year. When financial year, school year and calendar year differs, adjustments are made to ease comparison.

Enrolment rate per age is the percentage of students enrolled in each type of institution over the total of students

This indicator examines the share of students by gender, programme orientation, mode of study and type of institution over the total number of students.

Number of students by level of education, adjusted to the financial year. When financial year, school year and calendar year differs, adjustments are made to ease comparison.

Number of students enrolled in different education programmes by country of origin and sex.

Entrepreneurship is crucial to economic development, promoting social integration and reducing inequalities. The Gender-entrepreneurship dataset presents an original collection of indicators that measure gender equality in entrepreneurship, providing an important reference for policy insights and policy making. Data refer mainly to the self-employed, their profile, age, education and sector of activity.

Data is expressed in million national currency.   Environmental protection (EP) includes all activities and actions which have as their main purpose the prevention, reduction and elimination of pollution as well as any other degradation of the environment. The scope of environmental protection expenditure is defined according to the Classification of Environmental Protection Activities (CEPA 2000). CEPA distinguishes nine environmental domains.   The Environmental Protection Expenditure Account (EPEA) is a monetary description of environmental protection activities in accordance with the System of Environmental-economic Accounting (SEEA) central framework. It is coherent with the European System of Accounts (ESA 2010) which applies to national accounts and related satellite accounts. Because the full EPEA framework is quite expensive in terms of resources to be set up, this EPEA module significantly simplifies the full framework while it still allows compiling a measure of environmental protection expenditure for the whole economy comparable with national accounts aggregates.   This data focuses on the production and uses of environmental protection services. Output of these services can be output of market, non-market and ancillary activities. EPEA is directly linked to the three definitions of GDP, the production measure, the expenditure measure and the income measure of GDP.   EPEA covers (1) expenditure on EP products by resident units; (2) expenditure related to the production of EP products, including the gross capital formation, and (3) transactions related to the financing of EP expenditure. It covers both the supply and demand side. Demand equals supply: Final consumption + Gross fixed capital formation (GFCF for characteristic environmental activities) + Exports - Imports = Output - Intermediate consumption + VAT plus taxes less subsidies on products That is, the final uses of a product equal the supply of that product. The terms can be reorganised as follows: Final consumption + GFCF + Intermediate consumption = Output + Imports - Exports + VAT plus taxes less subsidies on products   The left side is the sought sum of expenditure on EP products by resident units. The right side proposes an alternative calculation approach, which indeed EPEA follows instead of the left side approach. There are several reasons for this choice, including that (a) output is simpler to measure than final consumption, intermediate consumption and capital formation (capital formation in EP products is rare; one instance is soil decontamination leading to land improvement); (b) imports and exports are small; and (c) output is also relevant by itself for analysis of production.

EAMFP growth measures the residual growth in the joint production of both the desirable and the undesirable outputs that cannot be explained by changes in the consumption of factor inputs (including labour, produced capital and natural capital). Therefore, for a given growth of input use, EAMFP increases when GDP increases or when pollution decreases. As part of the growth accounting framework underlying the EAMFP indicator, the growth contribution of natural capital and growth adjustment for pollution abatement indicators are derived: Growth contribution of natural capital - measures to what extent a country's growth in output is attributable to natural resource use; Growth adjustment for pollution abatement - measures to what extent a country's GDP growth should be corrected for pollution abatement efforts - adding what has been undervalued due to resources being diverted to pollution abatement, or deducing the ‘excess' growth which is generated at the expense of environmental quality.

Air pollution is considered one of the most pressing environmental and health issues across OECD countries and beyond. According to the World Health Organisation (WHO), exposure to fine particulate matter (PM2.5) has potentially the most significant adverse effects on health compared to other pollutants. PM2.5 can be inhaled and cause serious health problems including both respiratory and cardiovascular disease, having its most severe effects on children and elderly people. Exposure to PM2.5 has been shown to considerably increase the risk of heart disease and stroke in particular. For these reasons, population exposure to (outdoor or ambient) PM2.5 has been identified as an OECD Green Growth headline indicator. The underlying PM2.5 concentrations estimates are taken from van Donkelaar et al. (2016). They have been derived using satellite observations and a chemical transport model, calibrated to global ground-based measurements using Geographically Weighted Regression at 0.01° resolution. The underlying population data, Gridded Population of the World, version 4 (GPWv4) are taken from the Socioeconomic Data and Applications Center (SEDAC) at the NASA. The underlying boundary geometries are taken from the Global Administrative Unit Layers (GAUL) developed by the FAO, and the OECD Territorial Classification, when available. The current version of the database presents much more variation with respect to the previous one. The reason is that the underlying concentration estimates previously included smoothed multi-year averages and interpolations; while in the current version annual concentration estimates are used. Establishing trends of pollution exposure should be done with care, especially at smaller output areas, as their inputs (e.g. underlying data and models) can change from year to year. We recommend using a 3-year moving average for visualisation.

In view of the strong demand for cross-national indicators on the situation of families and children, the OECD Family Database was developed to provide cross-national indicators on family outcomes and family policies across the OECD countries, its enhanced engagement partners and EU member states. The database brings together information from various national and international databases, both from within the OECD and from external organisations. The database classifies indicators into four main dimensions: (i) structure of families, (ii) labour market position of families, (iii) public policies for families and children and (iv) child outcomes. Detailed information on the definitions, sources and methods used in the construction of the database can be found on the OECD Family Database webpage.

FDI data are based on statistics provided by 35 OECD member countries and by Lithuania. BMD4: OECD Benchmark Definition of Foreign Direct Investment - 4th Edition

This dataset FDI flows main aggregates, BMD4 is updated every quarter and includes annual and quarterly aggregate Foreign Direct Investment (FDI) flows for OECD member countries and for non-OECD G20 countries (Argentina, Brazil, China, India, Indonesia, Saudi Arabia and South Africa), which are included in Balance of Payments (BOP) accounts. FDI flows record the value of cross-border transactions related to direct investment during a given period of time, usually a quarter or a year, and consist of equity transactions, reinvestment of earnings, and intercompany debt transactions.

FDI statistics cover all entities in an FDI relationship. An FDI relationship is established when an investor in one country acquires 10% or more of the voting power in a business enterprise in another country. The investor is also called a direct investor or a parent and the business enterprise is called a direct investment enterprise or an affiliate. The 10 percent criteria is used to establish that the direct investor has a significant degree of influence over the operations of the direct investment enterprise. The FDI population includes affiliates that are directly and indirectly owned by the parent. In direct ownership, the parent owns the 10% or more voting power itself. In indirect ownership, the parent controls an affiliate that in turn owns 10 percent or more of the voting power in another enterprise. The FDI population also includes enterprises that are not in a direct investment relationship themselves but have a direct investor in common. Called fellow enterprises, they are included because, even though there is no direct investment relationship between the two, any transactions between them likely resulted from the influence that their common direct investor has on both of their operations.

This dataset FDI positions by counterpart area, BMD4 includes inward and outward Foreign Direct Investment (FDI) positions by partner country for OECD reporting economies.  Inward and outward FDI positions by partner country are presented according to the directional principle (unless otherwise specified in the country level metadata); they are measured in USD millions, in millions of national currency and as a share of total FDI positions.

This dataset FDI positions by economic activity, BMD4 includes inward and outward Foreign Direct Investment (FDI) positions by economic activity according to ISIC4 for OECD reporting economies.

This dataset FDI positions main aggregates, BMD4 is updated every quarter and includes annual aggregate Foreign Direct Investment (FDI) positions for OECD member countries and for non-OECD G20 countries (Argentina, Brazil, China, India, Indonesia, Saudi Arabia and South Africa), which are included in International Investment Position (IIP) accounts. FDI positions record the total level of direct investment at a given point in time, usually the end of a quarter or of a year.

The FDI Regulatory Restrictiveness Index (FDI Index) measures statutory restrictions on foreign direct investment across 22 economic sectors. It gauges the restrictiveness of a country’s FDI rules by looking at the four main types of restrictions on FDI: 1) Foreign equity limitations; 2) Discriminatory screening or approval mechanisms; 3) Restrictions on the employment of foreigners as key personnel and 4) Other operational restrictions, e.g. restrictions on branching and on capital repatriation or on land ownership by foreign-owend enterprises. Restrictions are evaluated on a 0 (open) to 1 (closed) scale. The overall restrictiveness index is the average of sectoral scores. The discriminatory nature of measures, i.e. when they apply to foreign investors only, is the central criterion for scoring a measure. State ownership and state monopolies, to the extent they are not discriminatory towards foreigners, are not scored. The FDI Index is not a full measure of a country’s investment climate. A range of other factors come into play, including how FDI rules are implemented. Entry barriers can also arise for other reasons, including state ownership in key sectors. A country’s ability to attract FDI will be affected by others factors such as the size of its market, the extent of its integration with neighbours and even geography among other. Nonetheless, FDI rules can be a critical determinant of a country’s attractiveness to foreign investors.

The dataset Fisheries International collaboration in technology development (bilateral) provides the number of co-inventions (simple patent families) developed jointly by at least two inventors. This indicator is disaggregated by: Country - country of residence of the inventor(s), integral counted; in cases when inventors from more than two countries collaborate, this is translated into distinct bilateral relationships between country pairs. For example, if inventors from 3 countries collaborate (e.g. USA, DEU, JPN) then a unit count is assigned to 6 country pairs (USA-DEU, USA-JPN, DEU-JPN, DEU-USA, JPN-USA, JPN-DEU); in this case a country generally coordinate the project and the others are partners. Partner – country of residence of the inventor(s) who collaborate to the patent. Technology domain – the three main areas of innovation in fisheries and aquaculture, related to technology development. In detail: 1. Harvesting technology such as more effective ways to find or harvest fish and which are typically associated with improvements in catch per unit of effort (e.g. type/size of vessels and their methods of propulsion, search technologies, method of catching or harvesting fish and bringing them on board); 2.Aquaculture technology such as methods to more effectively grow fish in captivity (innovation in feeds, improving the health of aquaculture animals, etc.); 3. New products and markets such as the development of new fish products and markets (food technologies/processing such as the development of surimi as a crabmeat substitute) and the improvement of market access (secure or enlarge markets for fish products) that provides important incentives for green growth (e.g. eco-certification with fishers adopting by-catch saving technologies or modifying fishing practices and/or territorial user rights in fisheries).

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

The Fisheries R&D expenditures dataset contains the budgetary expenditures in research and development on total budgetary FSE. Three variables are presented in this dataset:  • R&D expenditures - they are budgetary expenditures that finance research and development activities related to fisheries, irrespective of the institution (private or public, ministry, university, research centre or fisher group) or where they take place, the nature of research (scientific, institutional, etc.), or its purpose. The focus is on research and development expenditures on applied research related to the fisheries sector. Social-sciences research related to fisheries is included. It is also included data dissemination when associated primarily with research and development (knowledge generation), e.g. reports from research and databases developed as an adjunct to research. •FISHERIES SUPPORT ESTIMATE - Budgetary - it is the annual monetary value of gross transfers from taxpayers to fishers arising from policy measures that support fisheries, regardless of their nature, objectives or impacts. Data on FSE are collected by the Fisheries Committee (COFI) from the Trade and Agriculture Directorate (TAD) on an annual basis from all its participating countries. Data are provided by Fisheries Ministries, National Statistics Offices and other institution designated as an official data source. The original financial data is collected in national currency at current values; they are converted and published also in US dollars, for analytical purposes and to allow data comparisons. • Share of R&D expenditures on FSE - it is the share of budgetary research and development expenditures on total budgetary FSE. Please notice that total budgetary FSE is defined ‘net’, i.e. it is adjusted for costs incurred by fishers in order to receive the support. Whenever these costs are of significant amount, total budgetary FSE becomes remarkably low or negative. The corresponding share of research and development expenditures turns into a percentage exceptionally high or negative.

The OECD Fisheries Support Estimates (FSE) database is intended to be the best source of information on fisheries policies in OECD members and participating non-OECD economies.   It is designed to monitor and quantify developments in fisheries policy, to establish a common basis for policy dialogue among countries, and to provide economic data to assess the effectiveness and efficiency of policies.   These tables report country programmes data aggregated according to the main categories presented in the FSE Manual.   More detailed documentation on country programmes can be found in country-level metadata; more data on country programmes can be found in the full dataset (Excel Format - link provided below). Statistics are organized in pivot tables to make possible cross-country comparisons and to filter disaggregated policy-level data by policy implementation criteria and country.   The FSE data collection is part of the more comprehensive data gathering carried out on an annual basis by the Fisheries Committee (COFI) of the Trade and Agriculture Directorate (TAD) from OECD members and participating non-OECD economies.   Data on landings, aquaculture production, inland fisheries catch, fleet, employment, total allowable catch (TAC) and fisheries support estimate (FSE) are collected from Fisheries Ministries, National Statistics Offices and other institutions designated as an official data source. The surveys used for this exercise are the OECD Fisheries questionnaires.

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

Fisheries fleet: The FAO has a two dimensional definition, of which the OECD only uses the concept of fishing vessel. Fishery Fleet: The term "fishery fleet" or "fishery vessels" refers to mobile floating objects of any kind and size, operating in freshwater, brackishwater and marine waters which are used for catching, harvesting, searching, transporting, landing, preserving and/or processing fish, shellfish and other aquatic organisms, residues and plants. Fishing vessel: The term "fishing vessel" is used instead when the vessel is engaged only in catching operations. Gross Register Tonnage: The Gross Register Tonnage represents the total measured cubic content of the permanently enclosed spaces of a vessel, with some allowances or deductions for exempt spaces such as living quarters (1 gross register ton = 100 cubic feet = 2.83 cubic metres).

The number of students enrolled refers to the count of students studying in the reference period. Each student enrolled in the education programmes covered by the corresponding category is counted once and only once. National data collection systems permitting, the statistics reflect the number of students enrolled at the beginning of the school / academic year. Preferably, the end (or near-end) of the first month of the school / academic year is chosen (special arrangements are made for part-year students who may not start studies at the beginning of the school year). Students are classified as foreign students (non-citizens) if they are not citizens of the country in which the data are collected. While pragmatic and operational, this classification is inappropriate for capturing student mobility because of differing national policies regarding the naturalisation of immigrants. Countries that have lower propensity to grant permanent residence to its immigrant populations are likely to report second generation immigrants as foreign students. Therefore, for student mobility and bilateral comparisons, interpretations of data based on the concept of foreign students should be made with caution. Students are classified as international students if they left their country of origin and moved to another country for the purpose of study. Depending on country-specific immigration legislation, mobility arrangements, and data availability, international students may be defined as students who are not permanent or usual residents of their country of study or alternatively as students who obtained their prior education in a different country, including another EU country.

FDI statistics cover all entities in an FDI relationship. An FDI relationship is established when an investor in one country acquires 10% or more of the voting power in a business enterprise in another country. The investor is also called a direct investor or a parent and the business enterprise is called a direct investment enterprise or an affiliate. The 10 percent criteria is used to establish that the direct investor has a significant degree of influence over the operations of the direct investment enterprise.   The FDI population includes affiliates that are directly and indirectly owned by the parent. In direct ownership, the parent owns the 10% or more voting power itself. In indirect ownership, the parent controls an affiliate that in turn owns 10 percent or more of the voting power in another enterprise.   The FDI population also includes enterprises that are not in a direct investment relationship themselves but have a direct investor in common. Called fellow enterprises, they are included because, even though there is no direct investment relationship between the two, any transactions between them likely resulted from the influence that their common direct investor has on both of their operations.

Freshwater abstractions:   This dataset shows water abstractions by source (surface and ground water) and by major uses. Water abstractions refer to water taken from ground or surface water sources and conveyed to the place of use. If the water is returned to a surface water source, abstraction of the same water by the downstream user is counted again in compiling total abstractions.   When interpreting those data, it should be borne in mind that the definitions and estimation methods employed by member countries may vary considerably.   Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)  

Date is taken as per country metadata, and which is not having any metadata date is considered as 2023

This table contains data on full-time and part-time employment based on a common definition of 30-usual weekly hours of work in the main job. Data are broken down by professional status - employees, total employment - sex and standardised age groups (15-24, 25-54, 55+, total). Unit of measure used - Data are expressed in thousands of persons.

This dataset contains incidences and gender composition of part-time employment with standardised age groups (15-24, 25-54, 55-64, 65+, total). Part-time employment is based on national definitions.  The definition of part-time work varies considerably across OECD countries Essentially three main approaches can be distinguished: i) a classification based on the worker’s perception of his/her employment situation; ii) a cut-off (generally 30 or 35 hours per week) based on usual working hours, with persons usually working fewer hours being considered part-timers; iii) a comparable cut-off based on actual hours worked during the reference week. A criterion based on actual hours will generally yield a part-time rate higher than one based on usual hours, particularly if there are temporary reductions in working time as a result of holidays, illness, short-timing, etc. On the other hand, it is not entirely clear whether a classification based on the worker’s perception will necessarily yield estimates of part-time work that are higher or lower than one based on a fixed cut-off. In one country (France) which changed from 1981 to 1982 from a definition based on an actual hours cut-off (30 hours) to one based on the respondent’s perception, the latter criterion appeared to produce slightly higher estimates.

Data include pension funds per the OECD classification by type of pension plans and by type of pension funds. All types of plans are included (occupational and personal, mandatory and voluntary). The OECD classification considers both funded and book reserved pension plans that are workplace-based (occupational pension plans) or accessed directly in retail markets (personal pension plans). Both mandatory and voluntary arrangements are included. The data include plans where benefits are paid by a private sector entity (classified as private pension plans by the OECD) as well as those paid by a funded public sector entity. A full description of the OECD classification can be found at:http://www.oecd.org/dataoecd/0/49/38356329.pdf. Pension funds include also some personal pension arrangements like the Individual Retirement Accounts (IRAs) in the United States as well as funds for government workers. The coverage of the statistics follows the regulatory and supervisory framework. All authorised pension funds are therefore normally covered by the Global Pension Statistics exercise. Assets pertaining to reserve funds in social security systems are excluded.

Data include pension funds per the OECD classification by type of pension plans and by type of pension funds. All types of plans are included (occupational and personal, mandatory and voluntary). The OECD classification considers both funded and book reserved pension plans that are workplace-based (occupational pension plans) or accessed directly in retail markets (personal pension plans). Both mandatory and voluntary arrangements are included. The data include plans where benefits are paid by a private sector entity (classified as private pension plans by the OECD) as well as those paid by a funded public sector entity. A full description of the OECD classification can be found at: http://www.oecd.org/dataoecd/0/49/38356329.pdf.  Pension funds include also some personal pension arrangements like the Individual Retirement Accounts (IRAs) in the United States as well as funds for government workers. The coverage of the statistics follows the regulatory and supervisory framework. All authorised pension funds are therefore normally covered by the Global Pension Statistics exercise. Assets pertaining to reserve funds in social security systems are excluded.

The GID-DB is a database providing researchers and policymakers with key data on gender-based discrimination in social institutions. This data helps analyse women’s empowerment and understand gender gaps in other key areas of development.Covering 180 countries and territories, the GID-DB contains comprehensive information on legal, cultural and traditional practices that discriminate against women and girls.

This part contains general information on number of insurance companies and employees within the sector.

This dataset presents data on waste by economic sector, using the major divisions of the International Standard Industrial Classification (ISIC), revision 4. Data source(s): OECD/Eurostat joint questionnaire on waste. Source for non-OECD countries: UNSD, Country Files from the UNSD/UNEP data collection on environment statistics (available at: https://unstats.un.org/unsd/envstats/country_files).

This table provides information on the main relevant indicators. The data have mainly been supplied by the World Bank, and cover, where available: -Current Gross National Income (GNI) in US $ millions; -GNI per capita (US $); -Population; -Energy use as kilogram of oil per capita; -Average Life Expectancy of Adults; and -Adult Literacy Rate as a percentage of the country population. Data for Sudan include South Sudan, with the exception of total population, which is reported separately.

Bilateral ODA commitments by purpose. Data cover the years 2005 to 2009. Amounts are expressed in USD million. The sectoral distribution of bilateral ODA commitments refers to the economic sector of destination (i.e. the specific area of the recipient's economic or social structure whose development is, or is intended to be fostered by the aid), rather than to the type of goods or services provided. These are aggregates of individual projects notified under the Creditor Reporting System, supplemented by reporting on the sectoral distribution of technical co-operation, and on actual disbursements of food and emergency aid.

This data set contains information of The insurance industry is a major component of the economy by virtue of the amount of premiums it collects, the scale of its investment and, more fundamentally, the essential social and economic role it plays by covering personal and business risks. This annual report monitors global insurance market trends to support a better understanding of the insurance industry's overall performance and health.The OECD has collected and analysed data on insurance such as the number of insurance companies and employees, insurance premiums and investments by insurance companies dating back to the early 1980s. Over time, the framework of this exercise has expanded and now includes key balance sheet and income statement items for the direct insurance and reinsurance sector.

This data set combines the different regional publications of Revenue Statistics:Revenue Statistics 2019OECD/ATAF/AUC (2019), Revenue Statistics in Africa 2019OECD et al (2020), Revenue Statistics in Latin America and the Caribbean 2020 (LAC)Revenue Statistics in Asian and Pacific Economies 2019 Revenue Statistics The annual statistical publications present a unique set of detailed and internationally comparable tax revenue data in a common format. Its approach is based on the well-established methodology of the OECD Revenue Statistics (OECD, 2019), which has become an essential reference. It provides a conceptual framework defining which government receipts should be regarded as taxes and classifies different types of taxes. Comparable tables show revenue data by type of tax in national currency, as a percentage of GDP, and, for the different types of taxes, as a share of total taxation. Comparisons are also made with the averages of the 36 OECD economies, of the 24 LAC countries (two of which are OECD members countries° and of 26 African countries.   The data set does not replace the other publications, and users are advised to consult the regional data sets for country specific information.

Going for Growth helps to promote sustainable economic growth and improve the well-being of OECD citizens. The surveillance is based on a systematic and in-depth analysis of structural policies and their outcomes across OECD members, relying on a set of internationally comparable and regularly updated policy indicators with a well-established link to performance. From one issue to the next, Going for Growth follows up on these recommendations and priorities evolve, not least as a result of governments taking action, http://www.oecd.org/eco/going-for-growth/. This dataset contains time series of a comprehensive set of quantitative indicators that allow for a comparison of policy settings across OECD countries and selected non-member economies: Argentina, Brazil, China, Colombia, Costa Rica, India, Indonesia, Lithuania, the Russian Federation and South Africa. The dataset covers several areas: Product market regulation (economy-wide and sector-specific regulation), Education, Public investment and subsidies, Taxation, Labour market, Transfers. Data are consistent with those published in the Structural Policy Indicators chapter of Going for Growth 2018. The cut-off date is December 2017.

Graduation/entry rates represent an estimated percentage of an age group expected to graduate/enter a certain level of education at least once in their lifetime.

The OECD Green Growth database contains selected indicators for monitoring progress towards green growth to support policy making and inform the public at large. The database synthesises data and indicators across a wide range of domains including a range of OECD databases as well as external data sources. The database covers OECD member and accession countries, key partners (including Brazil, China, India, Indonesia and South Africa) and other selected non-OECD countries.

This dataset presents trends in man-made emissions of major greenhouse gases and emissions by gas.   Data refer to total emissions of CO2 (emissions from energy use and industrial processes, e.g. cement production), CH4 (methane emissions from solid waste, livestock, mining of hard coal and lignite, rice paddies, agriculture and leaks from natural gas pipelines), nitrous oxide (N2O), hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), sulphur hexafluoride (SF6) and nitrogen trifluoride (NF3). Data exclude indirect CO2.   Intensities (per unit of GDP and per capita) as well as index are calculated on gross direct emissions excluding emissions or removals from land-use, land-use change and forestry (LULUCF).   The GDP used to calculate intensities is expressed in USD at 2010 prices and PPPs.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Gross claims payments in the reporting country, containing a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

Gross fixed capital formation in the health care system is measured by the total value of the fixed assets that health providers have acquired during the accounting period (less the value of the disposals of assets) and that are used repeatedly or continuously for more than one year in the production of health services. While human resources are essential to the health and long-term care sector, physical resources are also a key factor in the production of health services. How much a country invests in new health facilities, diagnostic and therapeutic equipment, and information and communications technology (ICT) can have an important impact on the capacity of a health system to meet the healthcare needs of the population. Having sufficient equipment in intensive care units and other health settings helps to avoid potentially catastrophic delays in diagnosing and treating patients. Non-medical equipment is also important, notably the IT infrastructure needed to better monitor population health, both in acute situations and in the long term. Investing in capital equipment is therefore a prerequisite to strengthening overall health system resilience.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. This part contains gross operating expenses in the reporting country, with a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

Productivity is a key driver of economic growth and changes in living standards. Labour productivity growth implies a higher level of output for unit of labour input (hours worked or persons employed). This can be achieved if more capital is used in production or through improved overall efficiency with which labour and capital are used together, i.e., higher multifactor productivity growth (MFP). Productivity is also a key driver of international competitiveness, e.g. as measured by Unit Labour Costs (ULC).   The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the sources databases. However, some time lag may arise which affects individual series and/or countries for two reasons: first, hours worked data from the OECD Employment Outlook are typically updated less frequently than the OECD Annual National Accounts Database; second, source data for capital services are typically available in annual national accounts later than source data for labour productivity and ULCs.   Note to users: The OECD Productivity Database accounts for the methodological changes in national accounts' statistics, such as the implementation of the System of National Accounts 2008 (2008 SNA) and the implementation of the international industrial classification ISIC Rev.4. These changes had an impact on output, labour and capital measurement. For Chile, China, Colombia, India, Japan, Turkey and the Russian Federation the indicators are in line with the System of National Accounts 1993 (1993 SNA); for all other countries, the indicators presented are based on the 2008 SNA

Cancer follow up has been given for the range of 5 years. The highest range has been considered as for this period, for example 1995-2000 is considered as 2000.

OECD Health Data 2016 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

OECD Health Data 2017 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.B1:B4

OECD Health Data 2017 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

A System of Health Accounts 2011 provides an updated and systematic description of the financial flows related to the consumption of health care goods and services. As demands for information increase and more countries implement and institutionalise health accounts according to the system, the data produced are expected to be more comparable, more detailed and more policy relevant. It builds on the original OECD Manual, published in 2000 to create a single global framework for producing health expenditure accounts that can help track resource flows from sources to uses. It is the result of a collaborative effort between the OECD, WHO and the European Commission, and sets out in more detail the boundaries, the definitions and the concepts – responding to health care systems around the globe – from the simplest to the more complicated. The accounting framework is organised around a tri-axial system for the recording of health care expenditure, namely classifications of the functions of health care (ICHA-HC), health care provision (ICHA-HP), and financing schemes (ICHA-HF).

OECD Health Data 2016 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

Unit of measure usedIndex: Year 2015 = 100 The Hourly Earnings (MEI) dataset contains predominantly monthly statistics, and associated statistical methodological information, for the 35 OECD member countries and for selected non-member economies.  The MEI Earnings dataset provides monthly and quarterly data on employees' earnings series. It includes earnings series in manufacturing and for the private economic sector. Mostly the sources of the data are business surveys covering different economic sectors, but in some cases administrative data are also used. The target series for hourly earnings correspond to seasonally adjusted average total earnings paid per employed person per hour, including overtime pay and regularly recurring cash supplements. Where hourly earnings series are not available, a series could refer to weekly or monthly earnings. In this case, a series for full-time or full-time equivalent employees is preferred to an all employees series.

Gross domestic product (GDP) is the standard measure of the value added created through the production of goods and services in a country during a certain period. Equivalently it measures the income earned from that production, or the total amount spent on final goods and services (less imports). While GDP is the single most important indicator to capture these economic activities, it falls short of providing a suitable measure of people's material well-being. There is however a wealth of information available within the System of National Accounts (SNA) to help determine households’ economic well-being in a more appropriate way.The indicators selected for the OECD Household Dashboard represent a macro perspective on households using data produced within the framework of the SNA, supplemented with indicators such as the unemployment rate and consumer confidence. Taken together this set of indicators highlights material well-being from the household perspective, and thus provides more detailed information than simply looking at economic growth.The Household Dashboard indicators are based on data compiled according to the 2008 SNA "System of National Accounts, 2008". For countries who are still in the process of finalising the 2008 SNA, the indicators are based on data compiled according to the 1993 SNA.

How’s Life? Well-being is the one-stop shop for the 80+ indicators of the OECD Well-being Dashboard, providing information on current well-being outcomes, well-being inequalities and the resources and risks that underpin future well-being. The 11 dimensions of current well-being relate to material conditions that shape people’s economic options (Income and Wealth, Housing, Work and Job Quality) and quality-of-life factors that encompass how well people are (and how well they feel they are), what they know and can do, and how healthy and safe their places of living are (Health, Knowledge and Skills, Environmental Quality, Subjective Well-being, Safety). Quality of life also encompasses how connected and engaged people are, and how and with whom they spend their time (Work-Life Balance, Social Connections, Civic Engagement). The distribution of current well-being is taken into account by looking at three types of inequality: gaps between population groups (horizontal inequalities); gaps between those at the top and those at the bottom of the achievement scale in each dimension (vertical inequalities); and deprivations (i.e. the share of the population falling below a given threshold of achievement). The systemic resources that underpin future well-being over time are expressed in terms of four types of capital: Economic, Natural, Human and Social.

This dataset presents number of importing/exporting enterprises and their trade value (in millions of USD) by size class, and economic activity expressed in ISIC Rev.4.

The ICT Access and Usage by Households and Individuals database provides a selection of 92 indicators, based on the of 2nd revision of the OECD Model Survey on ICT Access and Usage by Households and Individuals.The selected indicators originate from two sources:1. An OECD data collection on the following OECD and accession countries or key partners: Australia, Brazil, Canada, Costa Rica, Chile, Colombia, Israel, Japan, Korea, Mexico, New Zealand, Switzerland, and the United States. Data collection methodology followed by these countries is available in each respective country metadata file.2. Eurostat Statistics on Households and Individuals for the OECD countries that are part of the European Statistical system. For those countries, indicators shown in this database refer to the original indicator as published by EUROSTAT -see the correspondence table-. Please refer to Eurostat methodology to access the methodological information.For all countries, breakdowns used correspond to those of EUROSTAT, unless otherwise stated in the metadata.

ICT goods are those that are either intended to fulfil the function of information processing and communication by electronic means, including transmission and display, OR which use electronic processing to detect, measure and/or record physical phenomena, or to control a physical process. ICT goods are defined by the OECD in terms of the Harmonised System. The guiding principle for the delineation of ICT goods is that such goods must either be intended to fulfil the function of information processing and communication by electronic means, including transmission and display, OR use electronic processing to detect, measure and/or record physical phenomena, or to control a physical process.Another guiding principle was to use existing classification systems in order to take advantage of existing data sets and therefore ensure the immediate use of the proposed standard. In this case, the underlying system is the Harmonized System (HS). The HS is the only commodity classification system used on a sufficiently wide basis to support international data comparison. A large number of countries use it to classify export and import of goods, and many countries use it (or a classification derived from or linked to it) to categorise domestic outputs.The application of the ICT product definition to selection of in-scope HS categories is a somewhat subjective exercise. The fact that the HS is not built on the basis of the functionality of products makes it much more difficult. The distinction between products which fulfil those functions and products that simply embody electronics but fundamentally fulfil other functions is not always obvious.It is possible to adopt a narrow or broad interpretation of the guideline, though the OECD chose a broader interpretation, an approach which is consistent with that adopted to develop the ICT sector definition.

NOTE FOR THIS DATA CUBEFor all indicators provided in this cube, value are expressed as percentage of Internet users.For each country (except for Costa Rica -see below-), the value of the indicators provided in this cube are based on data from the ICT Access and Usage by Households and Individuals database, and metadata and sources are strictly identical.Internet users generally relate to a recall period of 3 months or 12 months as indicated below. For exceptions, see the country metadata in the ICT Access and Usage by Households and Individuals database.For Australia, 12 months before 2014, 3 months from 2014 onwards.For Canada, Colombia and Japan, 12 months.For Israel, Costa Rica and the United States, 3 months.For New Zealand, 12 months in 2006.For Chile, Korea, Mexico, New Zeland (2006 excepted), Switzerland and Brazil: 1. For indicators starting with D1, I3 and I9, Internet users relate to a recall period of 3 months; 2. For indicators starting with F1, Internet users relate to a recall period of 3 months untill 2007 and of 12 months from 2008 onwards; 3. For the remaining indicators, Internet users relate to a recall period of 12 months.For Costa Rica, data are OECD estimates based on data provided by the National Institute of Statistics and Censuses and by the Ministry of Science, Technology and Telecommunications (MICITT), and for all the indicators, Internet users relate to a recall period of 3 months.For the remaining countries (all from Eurostat): 1. For indicators starting with D1, Internet users relate to a recall period of 3 months; 2. For indicators starting with F1, Internet users relate to a recall period of 3 months untill 2007 and of 12 months from 2008 onwards; 3. For the remaining indicators, Internet users relate to a recall period of 12 months.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older with a tertiary education.

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible.

The sources for this database are mainly census data, from the 2000 round of censuses. Census data were used for 22 countries. Countries not taking periodic censuses but keeping population registers have provided data extracted from these registers; this is the case for four countries: Denmark, Finland, Norway and Sweden. For some countries, not all themes covered in the database are present in the national census or register. Labour force surveys, provided by Eurostat and averaged over the period 1998-2002, have been used to fill the gaps where possible. The exact national source and reference period for each file is given in Table A.1 (see the methodological document).

This database contains information on several demographic and labour market characteristics of the population of 28 OECD countries around the year 2000, by country of birth. The OECD countries included are Australia, Austria, Belgium, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Luxembourg, Mexico, Netherlands, New Zealand, Norway, Poland, Portugal, the Slovak Republic, Spain, Sweden, Switzerland, Turkey, the United Kingdom and the United States. Most of the thematic files of the database include three core variables: the country of residence, the country of birth and educational attainment. Other variables available in the database include age, gender, citizenship, duration of stay, labour force status, occupation, sector of activity and field of study. In general, the database covers all individuals aged 15 and older.

This database presents the 2018 edition of OECD time-series indicators of implied R&D tax subsidy rates for OECD member countries and five non-member economies (Brazil, People's Republic of China, Romania, Russian Federation, and South Africa) over the period 2000-2018, drawing on data collected in the OECD-NESTI R&D tax incentive surveys from 2007 to 2018. The 2018 edition of RDTAXSUB contains time-series estimates that are based on headline tax credit and allowance rates, by firm size and profitability scenario. Due to limited historical data availability, the estimates are not adjusted for provisions that bound the tax benefits received by firms (e.g. ceilings, thresholds). They therefore provide an upper bound for the marginal tax subsidy implied by R&D tax relief measures across countries over time. These estimates should not be confused with separate contemporary cross-sectional OECD estimates of marginal tax subsidy rates (OECD, 2018) that compute adjusted (weighted) tax credit/allowance rates for a number of countries based on available information on the proportion of eligible R&D subject to different marginal levels of relief (see 2017).The tax subsidy rate is defined as 1 minus the B-index, a measure of the before-tax income needed by a “representative” firm to break even on USD 1 of R&D outlays (Warda, 2001). As tax component of the user cost of R&D, the B-Index is is directly linked to measures of effective marginal tax rates. Measures of tax subsidy rates such as those based on the B-index provide a convenient proxy for examining the implications of tax relief provisions. These provide a synthetic representation of the generosity of a tax system from the perspective of a generic or model type of firm for the marginal unit of R&D expenditure. To provide a more accurate representation of different scenarios, B-indices are calculated for “representative” firms according to whether they can claim tax benefits against their tax liability in the reporting period (OECD, 2013). When credits or allowances are fully refundable, the B-index of a firm in such a position is identical to the profit scenario. Carry-forwards are modelled as discounted options to claim incentives in the future, assuming a constant annual probability of returning to profit of 50% and a nominal discount rate of 10%. For general and country-specific notes on the time-series estimates of implied marginal tax subsidy rates on R&D expenditures (based on the B-index), see http://www.oecd.org/sti/rd-tax-stats-bindex-notes.pdf.

The allocation of bilateral intermediate imports across using industries assumes that import coefficients are the same for all trade partners, i.e. SHAREipkt is identical across exporter countries. Hence, the bilateral pattern of imported intermediates from industry p is the same across all using industries k. However, it is different from the bilateral pattern of total imports from industry p because trade data (measured by VALUEijpt) allows distinguishing bilateral imports of intermediates from final good imports in industry p. While the BEC classification enables the identification of intermediate goods, no similar classification is available for trade in services, due to the high level of aggregation in services trade data. While goods trade data are based on customs declarations allowing the identification of goods at a highly disaggregated level, services trade data are based on a variety of information such as business accounts, administrative sources, surveys, and estimation techniques (Manual on Statistics of International Trade in Services, 2002). Hence, in the case of trade in services, VALUEijpt is the total value of imports of service p, i.e. both final and intermediate (and not only services that are used in the production of other goods and services, as in the case of goods data). By making an additional assumption and adjusting SHAREipkt, it is however possible to calculate trade in intermediate services. In the case of services imports, SHAREipkt is the share of imported service inputs p used by industry k in total imports of p of country i. In the case of services, besides the assumption that all trading partners have the same distribution of intermediate imports p across using industries k, it is furthermore required that the share of intermediate services in overall bilateral services imports of country i is the same across all partner countries j. Finally, it should be mentioned that trade data reported in the trade statistics do not fully match imports as reported in I-O tables. One main reason is that while trade data is recorded at consumer prices, I-O tables are evaluated at producer prices. There are also other differences such as the treatment of re-exports, scrap metal, waste products and second hand goods or unallocated trade data.

Tourism can be regarded as a social, cultural and economic phenomenon related to the movement of people outside their usual place of residence.

Incidence of employment by usual weekly hours worked: This table contains data on the cross-country distribution of employment by hour bands for declared hour bands, broken down by professional status - employees, total employment - sex and detailed age groups. In order to facilitate analysis and comparisons over time, historical data for OECD members have been provided over as long a period as possible, often even before a country became a member of the Organisation. Information on the membership dates of all OECD countries can be found at OECD Ratification Dates

This table contains incidences and gender composition of part-time employment with standardised (15-24, 25-54, 55-64, 65+, total) and detailed age groups. Data are further broken down by professional status - employees, total employment. Part-time employment is based on a common 30-usual-hour cut-off in the main job. Unit of measure used - Data are expressed in percentages.

This table contains incidences and gender composition of part-time employment with standardised (15-24, 25-54, 55-64, 65+, total) and detailed age groups. Data are further broken down by professional status - employees, total employment. Part-time employment is based on national definitions. The definition of part-time work varies considerably across OECD countries Essentially three main approaches can be distinguished: i) a classification based on the worker's perception of his/her employment situation; ii) a cut-off (generally 30 or 35 hours per week) based on usual working hours, with persons usually working fewer hours being considered part-timers; iii) a comparable cut-off based on actual hours worked during the reference week. A criterion based on actual hours will generally yield a part-time rate higher than one based on usual hours, particularly if there are temporary reductions in working time as a result of holidays, illness, short-timing, etc. On the other hand, it is not entirely clear whether a classification based on the worker's perception will necessarily yield estimates of part-time work that are higher or lower than one based on a fixed cut-off. In one country (France) which changed from 1981 to 1982 from a definition based on an actual hours cut-off (30 hours) to one based on the respondent's perception, the latter criterion appeared to produce slightly higher estimates. Other data characteristics

This table contains incidences and gender composition of temporary employment with standardized age groups (15-24, 25-54, 55-64, 65+, total). Data are further broken down by professional status - employees, total employment. Unit of measure used - Data are expressed in percentages.

This table contains data on the share of the five durations - less than 1 month,>1 month and < 3 months,>3 months and <6 months,>6 months and <1 year, 1 year and over - of unemployment among total unemployment by sex and by standardised age groups (15-19, 15-24, 20-24, 25-54, 55+, total). Unit of measure used - Data expressed in percentages.

http://www.oecd.org/els/soc/IDD-Metadata.pdf

Data source(s) used The inland fisheries data collection is part of the more comprehensive data gathering carried out on an annual basis by the Fisheries Committee (COFI) of the Trade and Agriculture Directorate (TAD) from OECD members and participating non-OECD economies. Data on marine landings, aquaculture production, inland fisheries catch, fleet, employment, total allowable catch (TAC) and fisheries support estimate (FSE) are collected from Fisheries Ministries, National Statistics Offices and other institutions designated as an official data source. The surveys used for this exercise are the OECD Fisheries questionnaires.   Data are collected in tonnes and national currency at current values. For analytical purposes and data comparisons, value data are converted and published also in US dollars. Exchange rates are average yearly spot rates, taken from the dataset OECD Economic Outlook: Statistics and Projections. Data reported in this dataset are expressed in tonnes, in units of national currency and in US dollars. Data are recorded on a landed weight basis, i.e. the mass (or weight) of a product at the time of landing, regardless of the state in which is landed (i.e. whole, gutted, filleted, meal, etc.). For exceptions, please see the individual notes. Statistical population The statistical population is the set of countries participating in the work of the COFI, i.e. OECD members, excluding landlocked countries, with some exceptions (Czech Republic and Slovakia are included, Israel is not). The group includes also the following partner countries: Argentina, China, Colombia, Costa Rica, Indonesia, Lithuania, Peru, Philippines, Thailand and Chinese Taipei. In order to facilitate analysis and comparisons over time, historical data for OECD members have been provided over as long a period as possible, often even before a country became a member of the Organisation. Information on the membership dates of all OECD countries can be found at OECD Ratification Dates. Key statistical concept Inland fisheries include catches of fish, crustaceans, molluscs and other aquatic invertebrates (and animals), residues and seaweeds in lakes, rivers, ponds, inland canals and other land-locked water bodies. For the purpose of this questionnaire the boundary between inland and marine areas at the river mouth is left to the discretion of the national authority. Production from aquaculture installations should not be reported on this form. However, catches from fisheries that are managed by stocking should be included. The methodological reference document for fisheries and aquaculture statistics is the CWP Handbook of Fishery Statistics.

This dataset shows how much health providers spend on the inputs needed to produce healthcare goods and services (factors of provision). This information is typically tracked at national aggregate levels to meet the need to ensure an efficient, appropriate allocation of resources in the production of health care services. Specific policy needs may require information regarding total payments for human resources, expenditure on pharmaceuticals, and other significant inputs. Furthermore, the financial planning of health programmes and services often relies on information about the volume and mixture of factor spending.

Institutional Investors' Assets and Liabilities data are reported by Central Banks, National Statistical Institutes or Supervisory Authorities. The indicators reported here are compiled on the basis of those statistics.   The first set of indicators measure total financial assets (liabilities) held by each institutional investor as a percentage of GDP. Total financial assets (liabilities) is defined as the sum of the following asset (liability) categories: currency and deposits (F2), debt securities (F3), loans (F4), equity and investment fund shares (F5), insurance pension and standardized guarantee schemes (F6), financial derivatives and employee stock options (F7), and other accounts receivable (payable) (F8). The second set of indicators shows the share of each asset (liability) category in the total financial assets (liabilities) of each investor. They help to analyse the investment portfolio composition of the investor as well as financial risks borne by the investor. The third set of indicators shows the sub-sector composition of total financial assets (liabilities) by investor category, by showing the share of each sub-sector in the total financial assets (liabilities) of each investor category.

This dataset presents internationally comparable data on instruction time in full-time compulsory education. It covers primary and (lower and upper) secondary general education, but excludes pre-primary education, even if compulsory. Total number of instruction hours and the distribution of hours per subject is available either by level of education or by age.

These data are part of a larger database, hosted on a different website, which includes both quantitative and qualitative data, as well as graphs.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Breakdown of net premiums written in the reporting country in terms of domestic risks and foreign risks, thus providing an indicator of direct cross-border operations of insurance business.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Covers business written abroad by branches, agencies and subsidiaries established abroad of domestic undertakings and includes all business written outside the country by these entities (in both OECD and non-OECD countries).

This data deals with premiums written by classes of non-life insurance for the business written in the reporting country.

Geographic coverage OECD countries, Selected African and Asian countries, Selected Latin American countries Institutional coverage The insurance industry is a key component of the economy by virtue of the amount of premiums it collects, the scale of its investment and, more fundamentally, the essential social and economic role it plays in covering personal and business risks. The "OECD Insurance Statistics" publication provides major official insurance statistics for all OECD countries. The reader will find information on the diverse activities of this industry and on international insurance market trends. The data, which are standardised as far as possible, are broken down under numerous sub-headings, and a series of indicators makes the characteristics of the national markets more readily comprehensible. This publication is an essential tool for civil servants, businessmen and academics working in the insurance field. Item coverage This part consists of tables by indicators, which reflect the most significant characteristics of the OECD insurance market. In most cases, the tables contain data of all OECD countries as well as aggregated "OECD", "EU15" (the 15 member countries of the European Union in 1995) and "NAFTA" data from 1983 to 2015, for the following categories: - life insurance, - non-life insurance - and total. The premiums amounts are converted from national currencies into US dollar. Exchange rates used are end-of-period exchanges rates for all variables valued at the end of the year, and period-average for variables representig a flow during the year.

This dataset presents patent statistics and indicators that are suitable for tracking innovation in environment-related technologies. They allow the assessment of countries and firms' innovation performance as well as the design of governments' environmental and innovation policies.

Patents are a key measure of innovation output, as patent indicators reflect the inventive performance of countries, regions, technologies, firms, etc. They are also used to track the level of diffusion of knowledge across technology areas, countries, sectors, firms, etc., and the level of internationalisation of innovative activities. Patent indicators can serve to measure the output of R&D, its productivity, structure and the development of a specific technology/industry. Among the few available indicators of technology output, patent indicators are probably the most frequently used. The relationship between patents as an intermediate output resulting from R&D inputs has been investigated extensively. Patents are often interpreted as an output indicator; however, they could also be viewed as an input indicator, as patents are used as a source of information by subsequent inventors. Like any other indicator, patent indicators have many advantages and disadvantages. The advantages of patent indicators are : patents have a close link to invention; patents cover a broad range of technologies on which there are sometimes few other sources of data; the contents of patent documents are a rich source of information (on the applicant, inventor, technology category, claims, etc.); and patent data are readily available from patent offices. However, patents are subject to certain drawbacks: the value distribution of patents is skewed as many patents have no industrial application (and hence are of little value to society) whereas a few are of substantial value; many inventions are not patented because they are not patentable or inventors may protect the inventions using other methods, such as secrecy, lead time, etc.; the propensity to patent differs across countries and industries; differences in patent regulations make it difficult to compare counts across countries; and changes in patent law over the years make it difficult to analyse trends over time.

This dataset contains the number of people who graduated from an education programme by country of origin and sex.

Unit of measure used: Thousands   OECD countries seldom have tools specifically designed to measure the inflows and outflows of the foreign population, and national estimates are generally based either on population registers or residence permit data. This note is aimed at describing more systematically what is measured by each of the sources used.   Flows derived from population registers   Population registers can usually produce inflow and outflow data for both nationals and foreigners. To register, foreigners may have to indicate possession of an appropriate residence and/or work permit valid for at least as long as the minimum registration period. Emigrants are usually identified by a stated intention to leave the country, although the period of (intended) absence is not always specified.   When population registers are used, departures tend to be less well recorded than arrivals. Indeed, the emigrant who plans to return to the host country in the future may be reluctant to inform about his departure to avoid losing rights related to the presence on the register. Registration criteria vary considerably across countries (as the minimum duration of stay for individuals to be defined as immigrants ranges from three months to one year), which poses major problems of international comparison. For example, in some countries, register data cover a portion of temporary migrants, in some cases including asylum seekers when they live in private households (as opposed to reception centres or hostels for immigrants) and international students.   Flows derived from residence and/or work permits   Statistics on permits are generally based on the number of permits issued during a given period and depend on the types of permits used. The so-called “settlement countries” (Australia, Canada, New Zealand and the United States) consider as immigrants persons who have been granted the right of permanent residence. Statistics on temporary immigrants are also published in this database for these countries since the legal duration of their residence is often similar to long-term migration (over a year). In the case of France, the permits covered are those valid for at least one year (excluding students). Data for Italy and Portugal include temporary migrants.   Another characteristic of permit data is that flows of nationals are not recorded. Some flows of foreigners may also not be recorded, either because the type of permit they hold is not tabulated in the statistics or because they are not required to have a permit (freedom of movement agreements). In addition, permit data do not necessarily reflect physical flows or actual lengths of stay since: i) permits may be issued overseas but individuals may decide not to use them, or delay their arrival; ii) permits may be issued to persons who have in fact been resident in the country for some time, the permit indicating a change of status, or a renewal of the same permit.   Permit data may be influenced by the processing capacity of government agencies. In some instances a large backlog of applications may build up and therefore the true demand for permits may only emerge once backlogs are cleared.   Flows estimated from specific surveys   Ireland provides estimates based on the results of Quarterly National Household Surveys and other sources such as permit data and asylum applications. These estimates are revised periodically on the basis of census data. Data for the United Kingdom are based on a survey of passengers entering or exiting the country by plane, train or boat (International Passenger Survey). One of the aims of this survey is to estimate the number and characteristics of migrants. The survey is based on a random sample of approximately one out of every 500 passengers. The figures were revised significantly following the latest census in each of these two countries, which seems to indicate that these estimates do not constitute an “ideal” source either. Australia and New Zealand also conduct passenger surveys which enable them to establish the length of stay on the basis of migrants’ stated intentions when they enter or exit the country.

This indicator reports the percentage of students of each country of origin over the total of international students.

This dataset presents official international trade statistics in fisheries products, directly sourced from the UN Comtrade Database.

This table contains figures on the activity of affiliates under foreign control and all firms by industry according to the International Standard Industrial Classification (ISIC Revision 4).

This table contains figures on affiliates under foreign control by investing country in the total manufacturing, total services and total business enterprise sectors.

The IPP.Stat is the statistics portal of the Innovation Policy Platform containing the main available indicators relevant to a country’s innovation performance. In addition to the traditional indicators used to monitor innovation, the range of the coverage to be found in the IPP.Stat calls for the inclusion of indicators from other domains that describe the broader national and international context in which innovation occurs. Indicators are sourced primarily from the OECD and the World Bank, as well as from other sources of comparable quality. The statistics portal is still under development.

The Key Economic Indicators (KEI) database contains monthly and quarterly statistics (and associated statistical methodological information) for all OECD member countries and for a selection of non-member countries on a wide variety of economic indicators, namely: quarterly national accounts, industrial production, composite leading indicators, business tendency and consumer opinion surveys, retail trade, consumer and producer prices, hourly earnings, employment/unemployment, interest rates, monetary aggregates, exchange rates, international trade and balance of payments.

This dataset contains data on employment by hour bands for usual weekly hours worked in the main job.  Standard hour bands are reported for most countries.  Actual hours of work instead of usual hours of work are only available in some countries (Japan and Korea).  Data are broken down by professional status - employees, total employment - by sex and standardised age groups (15-24, 25-54, 55+, total). Unit of measure used - Data are expressed in thousands of persons. For detailed information on labour force surveys for all countries please see the attached file : www.oecd.org/els/employmentpoliciesanddata/LFSNOTE

Land resources are one of the four components of the natural environment: water, air, land and living resources. In this context land is both: a physical "milieu" necessary for the development of natural vegetation as well as cultivated vegetation;a resource for human activities.  The data presented here give information concerning land use state and changes (e.g. agricultural land, forest land).  Land area excludes area under inland water bodies (i.e. major rivers and lakes).   Arable refers to all land generally under rotation, whether for temporary crops (double-cropped areas are counted only once) or meadows, or left fallow (less than five years). These data are not meant to indicate the amount of land that is potentially cultivable.  Permanent crops are those that occupy land for a long period and do not have to be planted for several years after each harvest (e.g. cocoa, coffee, rubber). Land under vines and trees and shrubs producing fruits, nuts and flowers, such as roses and jasmine, is so classified, as are nurseries (except those for forest trees, which should be classified under "forests and other wooded land").  Arable and permanent crop land is defined as the sum of arable area and land under permanent crops.  Permanent meadows and pastures refer to land used for five years or more to grow herbaceous forage crops, either cultivated or growing wild (wild prairie or grazing land).  Forest refers to land spanning more than 0.5 hectare (0.005 km2) and a canopy cover of more than 10 percent, or trees able to reach these thresholds in situ. This includes land from which forests have been cleared but that will be reforested in the foreseeable future. This excludes woodland or forest predominantly under agricultural or urban land use and used only for recreation purposes.

The productivity and income estimates presented in this dataset are mainly based on GDP, population and employment data from the OECD Annual National Accounts. Hours worked are sourced from the OECD Annual National Accounts, the OECD Employment Outlook and national sources. The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the sources databases. However, timely data issues may arise and affect individual series and/or individual countries. In particular, annual hours worked estimates from the OECD Employment Outlook are typically updated less frequently (once a year, in the summer) than series of hours worked from the OECD Annual National Accounts.

This table contains labour force data on labour market status - population, labour force, unemployment and employment - by sex and by detailed age groups and standard age groups (15-24, 25-54, 55-64, 65+, total). Note: Population figures reported in table LFS by sex are Census-based, while the data for this table are taken from labour force surveys. Population for total age group refers to working age population (15 to 64 years).

This table contains data on labour force participation rates, employment/population ratios and unemployment rates for both the total labour force and civilian labour force by sex. There are data for both the total age group and the working age population (ages 15 to 64). This table also contains data on the share of civilian employment by sex.

This dataset contains the age composition (as a percentage of all ages) of the population for each labour force status - labour force, employment, unemployment - by sex.

The OECD Long-Term Baseline Scenario is a projection of some major economic variables beyond the short-term horizon of the OECD Economic Outlook. It covers all OECD economies, non-OECD G20 economies and key partners. The projection horizon is currently 2060. For the historical period and the short-run projection horizon, the series are consistent with those of the OECD Economic Outlook number in the dataset title. The definitions, sources and methods are also the same, except where noted explicitly (such as coverage of the non-OECD and world aggregates). For more details on the methodology, please see Boxes 1 to 3 in The Long View: Scenarios for the World Economy to 2060 and the references therein.The baseline scenario is a projection conditional on a number of assumptions, notably that countries do not carry out institutional and policy reforms. It is used as a reference point to illustrate the potential impact of structural reforms in alternative scenarios, such as those discussed in The Long View: Scenarios for the World Economy to 2060. The data for these alternative scenarios are not available here but can be obtained on request by writing to [email protected].

Main Economic Indicators (MEI) provides a wide range of indicators on recent economic developments in the 35 OECD member countries and 15 non-member countries. The indicators published in MEI have been prepared by national statistical agencies primarily to meet the requirements of users within their own country. In most instances, the indicators are compiled in accordance with international statistical guidelines and recommendations. However, national practices may depart from these guidelines, and these departures may impact on comparability between countries.

This dataset contains the number of Management personnel and teacher aides in educational institutions by sex and intensity.

IPAW = Income as a percentage of the average wage This data is updated after the finalisation of the Taxing Wages publication for the corresponding year. This table reports marginal personal income tax and social security contribution rates for a single person without dependent, at various multiples (67%, 100%, 133%, 167%) of the AW/APW. The average wage (AW) by country and year can be found within the Taxing Wages comparative tables dataset, under the indicator heading: Total gross earnings before taxes (national currency). The AW is based on a single person at 100% of average earnings, no child. The results, derived from the OECD Taxing Wages framework (elaborated in the annual publication Taxing Wages), use tax rates applicable to the tax year. The results take into account basic/standard income tax allowances and tax credits and include family cash transfers (see Taxing Wages). The marginal rates are expressed as a percentage of gross wage earnings, with the exception of the Total tax wedge which is expressed as a percentage of gross labour costs (gross wages + employer SSC). The sub-central personal tax rates used in this table correspond to those used in Taxing Wages. The figures may differ from those published in Taxing Wages where updated information is available, such as revised AW/APW data. Further explanatory notes may be found in the Explanatory Annex.

The Maritime Transport Costs (MTC)database contains data from 1991 to the most recent available year of bilateral maritime transport costs. Transport costs are available for 43 importing countries (including EU15 countries as a custom union) from 218 countries of origin at the detailed commodity (6 digit) level of the Harmonized System 1988. This dataset should only be used in conjunction with the paper Clarifying Trade Costs in Maritime Transport which outlines methodology, data coverage and caveats to its use. Key Statistical Concept Import charges represent the aggregate cost of all freight, insurance and other charges (excluding import duties) incurred in bringing the merchandise from alongside the carrier at the port of export and placing it alongside the carrier at the first port of entry in the importing country. Insurance charges are therefore included in the transport cost variables and are estimated to be approximately 1.5% of the import value of the merchandise.

These data refer to material resources, i.e. materials originating from natural resources that form the material basis of the economy: metals (ferrous, non-ferrous) non-metallic minerals (construction minerals, industrial minerals), biomass (wood, food) and fossil energy carriers. 

This dataset presents members' total use of the multilateral system i.e. both their multilateral aid ("Core contributions to") and bilateral aid channelled through ("Contributions through") multilateral organisations. These data originate from members' reporting at item-level in the CRS and are published here starting with 2011 data (item-level data for multilateral aid is not complete in CRS for earlier years).

Despite the growing importance of international trade, driven in large part by the rise of globalisation and the accompanying international fragmentation of production, the availability of statistics on price change in international merchandise trade at more graular level is still limited. To fill this data gap, the OECD has developed this new Merchandise Trade Price Index (MTPI) database using UN COMTRADE. The first release covers about 100 countries from 2011 to 2017. Indices by reporting country are available for both exports and imports, broken down by 30 products, aligned with the 2-digit level of the Classification of Products of Activity (CPA, version 2.1). Future releases are planned to expand the country coverage and the level of disaggregation.

For cross-country comparisons, data on minimum wage levels are further supplemented with another measure of minimum wages relative to average wages, that is, the ratio of minimum wages to median earnings of full-time employees. Median rather than mean earnings provide a better basis for international comparisons as it accounts for differences in earnings dispersion across countries. However, while median of basic earnings of full-time workers - i.e. excluding overtime and bonus payments - are, ideally, the preferred measure of average wages for international comparisons of minimum-to-median earnings, they are not available for a large number of countries. Minimum relative to mean earnings of full-time workers are also provided.

This dataset contains statutory and national minimum wages in 30 OECD Member countries, Brazil, Malta, Romania and the Russian Federation. For detailed country notes: see http://www.oecd.org/employment/emp/Minimum-wages.pdf

Database published : June 2020 

Database published : June 2020 

This dataset contains monthly Comparative Price Levels (CPL) for OECD countries. CPLs are defined as the ratios of PPPs for private final consumption expenditure to exchange rates. They provide measures of differences in price levels between countries. The monthly PPPs used to derive the table are OECD estimates. The table is to be read vertically. Each column shows the number of specified monetary units needed in each of the countries listed to buy the same representative basket of consumer goods and services. In each case the representative basket costs a hundred units in the country whose currency is specified. Let’s take an example. If you are a Canadian citizen and you want to know the price level in Canada when compared to other countries, you have to look at the column Canada, where the price level is set at 100 for the whole column. If you have 120 for Finland, it means that the price level in Finland is 20% higher than in Canada. It means that you would spend 120 dollars in Finland to buy the same basket of goods and services when you spend 100 in Canada.

The International Trade (MEI) dataset contains predominantly monthly merchandise trade statistics, and associated statistical methodological information, for all OECD member countries and for all non-OECD G20 economies and the EU.   The dataset itself contains international trade statistics measured in billions of United States dollars (USD) for: Exports, Imports, Balance. In all cases a lot of effort has been made to ensure that the data are internationally comparable across all countries presented and that all the subjects have good historical time-series’ data to aid with analysis.

Air pollution is considered one of the most pressing environmental and health issues across OECD countries and beyond. According to the World Health Organisation (WHO), exposure to fine particulate matter (PM2.5) and ground-level ozone (O3) have potentially the most significant adverse effects on health compared to other pollutants. PM2.5 can be inhaled and cause serious health problems including both respiratory and cardiovascular disease, having its most severe effects on children and elderly people. Exposure to PM2.5 has been shown to considerably increase the risk of heart disease and stroke in particular. For these reasons, population exposure to (outdoor or ambient) PM2.5 has been identified as an OECD Green Growth headline indicator. Exposure to ground-level ozone (O3) has serious consequences for human health, contributing to, or triggering, respiratory diseases. These include breathing problems, asthma and reduced lung function (WHO, 2016; Brauer et al., 2016). Ozone exposure is highest in emission-dense countries with warm and sunny summers. The most important determinants are background atmospheric chemistry, climate, anthropogenic and biogenic emissions of ozone precursors such as volatile organic compounds, and the ratios between different emitted chemicals.

This dataset presents trends in amounts of municipal waste generated (including household waste), and the treatment and disposal method used. The amount of waste generated in each country is related to the rate of urbanisation, the types and pattern of consumption, household revenue and lifestyles.

It presents gross capital formation, gross fixed capital formation, changes in inventories and acquisition less disposals of valuables broken down by detailed industries according to the classification ISIC rev.4. Gross fixed capital formation is also available broken down by type of assets. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2005). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It presents fixed assets by activity according to the classification ISIC rev.3 and by type of product and by type of assets.  It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. In national currency, in current prices and constant prices (national base year and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It presents the balance sheets for non financial assets by institutional sectors, for both produced assets (fixed assets, inventories, valuables) and non-produced assets (tangible and intangible).  It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

This dataset presents information using an "indicator" approach, focusing on cross-country comparisons. The aim is to make the accounts more accessible and informative, whilst taking the opportunity to present the conceptual underpinning  and comparability issues of each of the indicators presented. The range of indicators is set deliberately wide to reflect the richness of the national accounts dataset and to encourage users of economic statistics to refocus some of the spotlight that is often placed on GDP to other important economic indicators, which may better respond to their needs. Indeed many users themselves have been instrumental in this regard. The report of the Commission on the Measurement of Economic Performance and Social Progress (Stiglitz-Sen-Fitoussi Commission) is but one notable example. That is not to undermine the importance of GDP, which arguably remains the most important measure of total economic activity, but other measures may better reflect other aspects of the economy. For example, net national income may be a more appropriate measure of income available to citizens in countries with large outflows of property income, and household adjusted disposable income per capita may be a better indicator of the material well-being of citizens. But certainly from a data perspective more can and remains to be done. The Stiglitz-Sen-Fitoussi Commission for example highlights the pressing need for the provision, by official statistics institutes, of more detailed information that better describes the distributional aspects of activity, especially income, and the need to build on the national accounts framework to address issues such as non-market services produced by households or leisure. It is hoped that by producing a publication such as this and thereby raising awareness, the momentum from this and other initiatives will be accelerated. The publication itself will pick up new indicators in the future as they become available at the OECD.

It presents the whole set of non financial accounts, from the production account to the acquisitions of non-financial assets accounts. For general government sector, property income, other current transfers and capital transfers are consolidated..

It presents the whole set of non financial accounts, from the production account to the acquisitions of non-financial assets accounts. For general government sector, property income, other current transfers and capital transfers are consolidated.. It has been prepared from statistics reported to the OECD by Member countries in their answers to the new version of the annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA.

It presents gross capital formation, gross fixed capital formation, changes in inventories and acquisition less disposals of valuables broken down by detailed industries. Gross fixed capital formation is also available broken down by type of assets. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It presents the different transactions and balances to get from the GDP to the net lending/net borrowing. Therefore, it includes, in particular, national disposable income (gross and net), consumption of fixed capital as well as net saving.

It presents the final consumption expenditure of households broken down by the COICOP (Classification of Individual Consumption According to Purpose) classification and by durability.  It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It provides a faithful image, to the greatest extent possible, of the aggregates and balances of the general government sector in the SNA 1993 conceptual framework. In addition, it brings to light two relevant aggregates that do not belong to this conceptual frame work: the Total Revenue and the Total Expenditure of the general government sector. Unit of measure used - National currency; current prices. Expressed in millions.

Annual National Accounts>General Government Accounts>750. General Government Debt-Maastricht   Unit of measure used: National currency; current prices. Expressed in millions   Statistical population: Government debt as defined in the Maastricht Treaty (Source : Eurostat). Available for Europeans countries only. In the Protocol on the excessive deficit procedure annexed to the Maastricht Treaty, government debt is defined as the debt of the whole general government sector: gross, consolidated and nominal value (face value). It excludes the other accounts payable (AF.7), as well as, if they exist, insurance technical reserve (AF.6).

It provides a breakdown of government expenditure according to their function. To meet this end, economic flows of expenditure must be aggregated according to the Classification of the Functions of Government (COFOG).

It presents the three approaches of the GDP: expenditure based, output based and income based. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA.

Annual National Accounts>Detailed Tables and Simplified Accounts>7A. Labour input by activity, ISIC rev4   Unit of measure used: In persons, full-time equivalents, jobs and hours.   Statistical population: It presents employment, broken down by detailed industries according to the classification ISIC rev.4. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire.

It presents population data and employment by main activity. It includes national concept data for economically active population, unemployed persons, total employment, employees and self-employed, as well as domestic concept data for total employment, employees and self-employed. The domestic concept data are available broken down by main activity. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire.

It presents simplified non-financial accounts, from the gross value added to the net lending/net borrowing. In this table, the total economy is broken down in three main institutional sectors: corporations, general government, households and non-profit institutions serving households. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency, in current prices. Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

Annual National Accounts>Supply and Use Tables>30. Supply at basic prices and its transformation into purchasers' prices   Unit of measure used: In national currency, in current prices and previous year prices. Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.   Statistical population: It presents the Supply table at basic prices and its transformation into purchaser's prices. It provides information by industry (at the 2 digit ISIC Rev 4 level, containing 89 industries) with corresponding breakdowns by product (using the comparable CPA product breakdown). It has been prepared from statistics reported to the OECD by countries in their answers to Supply and Use questionnaire.

Annual National Accounts>Supply and Use Tables>SUT Indicators>SUT Indicators   Statistical population: These indicators are calculated by the OECD from the SUT statistics reported to the OECD by countries in their answers to Supply and Use questionnaire.   Key statistical concept: The supply table describes the supply of goods and services, which are either produced in the domestic industry or imported. The use table shows where and how goods and services are used in the economy. Therefore in addition to their essential role to better estimations of National Accounts, Supply and Use tables are also a very powerful tool to understand the impact of policy decisions and globalisation, as they provide a detailed analysis of the process of production and the use of goods and services. For example, the Supply and Use Tables could be used to measure the the percentage of imports used in the production process or the share of trade and transport margins in the households’ final consumption expenditure.

Annual National Accounts>Supply and Use Tables>31. Supply, Output and its components by industries   Unit of measure used: In national currency, in current prices and previous year prices. Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.   Statistical population: It presents the breakdown of output at basic prices between market output, output for own final use and non-market output, by activty at the 2 digit ISIC Rev 4 level. It has been prepared from statistics reported to the OECD by countries in their answers to Supply and Use questionnaire.

It provides a faithful image, to the greatest extent possible, of the aggregates and balances of the general government sector Data are also available, for most countries, for the sub-sectors of general government.

Annual National Accounts>Supply and Use Tables>40. Use at purchasers' prices   Unit of measure used: In national currency, in current prices and previous year prices. Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.   Statistical population: It presents the Use table at purchaser's prices. It provides information by industry (at the 2 digit ISIC Rev 4 level, containing 89 industries) with corresponding breakdowns by product (using the comparable CPA product breakdown). It has been prepared from statistics reported to the OECD by countries in their answers to Supply and Use questionnaire.

Annual National Accounts

Annual National Accounts

Statistical population: Its presents output, intermediate consumption and the gross value added and its components, in particular compensation of employees and gross operating surplus and mixed income, broken down by detailed industries according to the classification ISIC rev.4. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. Unit of measure used: In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.   Note: 6A. Value added and its components by activity, ISIC rev4

Statistical population: Its presents output, intermediate consumption and the gross value added and its components, in particular compensation of employees and gross operating surplus and mixed income, broken down by detailed industries. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. Data presented in this table will not be updated after summer 2010. Data reported to the OECD by countries in their answers to the annual national accounts questionnaire are now available on theme Industry and Services, Structural Analysis (STAN) Databases. Unit of measure used: In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

Number of new entrants in a given programme by field and sex.

Non-medical determinants of health: Unhealthy lifestyles and poor environments cause millions of people to die prematurely. Smoking, harmful alcohol use, physical inactivity and obesity are the root cause of many chronic conditions. This dataset presents the latest data for tobacco consumption (including daily smokers by age and sex), vaping (by age and sex), alcohol consumption, fruits and vegetables consumption, as well as measured and self-reported data on overweight and obesity.

This OECD inventory maps existing cross-country surveys that provide information on the characteristics of people's jobs. The information included in this inventory covers international surveys conducted since the early 1990s that are based on individuals' self-reported assessment of their current job, for 160 countries over 25 years. Survey questions are grouped into 19 indicators. For each indicator, binary codes (1 and 0) show whether indicators are available or not for the various countries and years. The inventory also provides users with detailed documentation on the questions used in the various surveys for measuring these indicators.

The OECD Science, Technology and Industry Outlook reviews key trends in STI policies and performance in OECD countries and major emerging economies. It is published every two years and draws on a unique international policy survey conducted by the OECD - with more than 45 countries involved in 2014 - and the latest OECD work on STI policy analysis and measurement. Following an overview of the recent STI global landscape, key current policy issues are discussed across a series of thematic policy profiles. Country profiles report the STI performance of individual countries and the most recent national policy developments.

The OECD Weekly Tracker of GDP growth provides a real-time high-frequency indicator of economic activity using machine learning and Google Trends data. It has a wide country coverage of OECD and G20 countries. The Tracker is thus particularly well suited to assessing activity during the turbulent period of the current global pandemic. It applies a machine learning model to a panel of Google Trends data for 46 countries, and aggregates together information about search behaviour related to consumption, labour markets, housing, trade, industrial activity and economic uncertainty.   The Weekly Tracker proxies the percent change in weekly GDP levels from the pre-crisis trend. The pre-crisis trend is taken from OECD forecasts made prior to the crisis (in the November 2019 Economic Outlook). Two other flavours of the Tracker are also available in the datafiles: a Tracker of weekly GDP growth year-on-year (that is, the percent change in weekly GDP from the same week in the past year), and a Tracker of weekly GDP growth year-on-two-year (the percent change in weekly GDP from the same week two years earlier). 

Other official flows are official sector transactions which do not meet the ODA criteria, e.g.:  i.) Grants to developing countries for representational or essentially commercial purposes;  ii.) Official bilateral transactions intended to promote development but having a grant element of less than 25 per cent;  iii.) Official bilateral transactions, whatever their grant element, that are primarily export-facilitating in purpose. This category includes by definition export credits extended directly to an aid recipient by an official agency or institution ("official direct export credits");  iv.) The net acquisition by governments and central monetary institutions of securities issued by multilateral development banks at market terms;  v.) Subsidies (grants) to the private sector to soften its credits to developing countries [see Annex 3, paragraph A3.5.iv)b)];  vi.) Funds in support of private investment.

This table contains figures on the activity of affiliates located abroad by host country in the total manufacturing, total services and total business enterprise sectors. The units used to present data in AMNE are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

This table contains figures on the activity affiliates located abroad by industry according to the International Standard Industrial Classification (ISIC Revision 4). The units used to present data in AMNE are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

This dataset presents patent statistics and indicators that are suitable for tracking innovation in environment-related technologies. They allow the assessment of countries and firms' innovation performance as well as the design of governments' environmental and innovation policies.

The OECD Environment Directorate, in collaboration with the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in environment-related technologies. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' environmental and innovation policies. The patent statistics presented here are constructed using data extracted from the Worldwide Patent Statistical Database (PATSTAT) of the European Patent Office (EPO) using algorithms developed by the OECD. Consistent with other patent statistics provided in OECD.Stat, only published applications for "patents of invention" are considered (i.e. excluding utility models, petty patents, etc.). The relevant patent documents are identified using search strategies for environment-related technologies (ENV-TECH) which were developed specifically for this purpose. They allow identifying technologies relevant to environmental management, water-related adaptation and climate change mitigation. An aggregate category labelled "selected environment-related technologies" includes all of the environmental domains presented here.

The OECD Environment Directorate, in collaboration with the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in environment-related technologies. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' environmental and innovation policies. The patent statistics presented here are constructed using data extracted from the Worldwide Patent Statistical Database (PATSTAT) of the European Patent Office (EPO) using algorithms developed by the OECD. Consistent with other patent statistics provided in OECD.Stat, only published applications for "patents of invention" are considered (i.e. excluding utility models, petty patents, etc.). The relevant patent documents are identified using search strategies for environment-related technologies (ENV-TECH) which were developed specifically for this purpose. They allow identifying technologies relevant to environmental management, water-related adaptation and climate change mitigation. An aggregate category labelled "selected environment-related technologies" includes all of the environmental domains presented here.

Patents are a key measure of innovation output, as patent indicators reflect the inventive performance of countries, regions, technologies, firms, etc. They are also used to track the level of diffusion of knowledge across technology areas, countries, sectors, firms, etc., and the level of internationalisation of innovative activities. Patent indicators can serve to measure the output of R&D, its productivity, structure and the development of a specific technology/industry. The relationship between patents as an intermediate output resulting from R&D inputs has been investigated extensively. Patents are often interpreted as an output indicator; however, they could also be viewed as an input indicator, as patents are used as a source of information by subsequent inventors. Like any other indicator, patent indicators have many advantages and disadvantages. The advantages of patent indicators are :patents have a close link to invention;patents cover a broad range of technologies on which there are sometimes few other sources of data;the contents of patent documents are a rich source of information (on the applicant, inventor, technology category, claims, etc.); andpatent data are readily available from patent offices. However, patents are subject to certain drawbacks:the value distribution of patents is skewed as many patents have no industrial application (and hence are of little value to society) whereas a few are of substantial value;many inventions are not patented because they are not patentable or inventors may protect the inventions using other methods, such as secrecy, lead time, etc.;the propensity to patent differs across countries and industries;differences in patent regulations make it difficult to compare counts across countries; andchanges in patent law over the years make it difficult to analyse trends over time. 

The OECD Pensions at a Glance Database has been developed in order to serve a growing need for pensions indicators. It includes reliable and internationally comparable statistics on public and mandatory and voluntary pensions. It covers 34 OECD countries and aims to cover all G20 countries. Pensions at a Glance reviews and analyses the pension measures enacted or legislated in OECD countries. It provides an in-depth review of the first layer of protection of the elderly, first-tier pensions across countries and provideds a comprehensive selection of pension policy indicators for all OECD and G20 countries.

This dataset reports data on pharmaceutical consumption and sales, according to the Anatomical Therapeutic Chemical (ATC) classification, and on the share of generics in the pharmaceutical market.

This dataset contains the number of people by sex and age group per country.

This dataset presents annual population projections data up to 2061 by sex and five year age groups as well as the share of children, youth, the elderly, old-age and total dependency ratios. The data is available for all 38 member countries as well as for the EU27 and G20 countries, Singapore and the World total. Population projections are, in most countries, according to medium variant. (See country details for the variants retained for each demographic component of total fertility, life expectancy at birth and net annual migration).

Country weights used for calculation of Consumer Prices and Producer Prices OECD zones

Private transactions are those undertaken by firms and individuals resident in the reporting country.

This dataset presents activities in support of development from philanthropic foundations since 2009, including bilateral activities and core contributions to multilateral organisations. Bilateral activities from this dataset can also be found in the Creditor Reporting System (CRS) database. Collecting data on private philanthropy for development is work in progress, which may explain break in series for some foundations.

DUE TO CHANGES IN THE METHODOLOGY THE 2018 PMR VALUES CANNOT BE COMPARED WITH PREVIOUS VINTAGES. The 2018 OECD Indicators of Product Market Regulation (PMR) are a comprehensive and internationally-comparable set of indicators that measure the degree to which laws and policies promote or inhibit competition in areas of the product and service market where competition is viable. These indicators measure the de iure regulatory environments in 34 OECD countries and in a set of non-OECD countries in 2018. The economy-wide indicators cover the extent to which the involvement of the state in the economy can generate distortions to competition and the level of the barriers to entry and expansion to domestic and foreign firms in different sectors of the economy. Users of the data must be aware that they may no longer fully reflect the current situation in fast reforming countries.

The 'Production and Sales (MEI)' dataset is a dataset containing predominantly monthly statistics, and associated statistical methodological information, for the 34 OECD member countries and for selected other economies. The Production and Sales dataset contains industrial statistics on four separate subjects: Production; Sales; Orders; and Work started. The data series presented within these subjects have been chosen as the most relevant industrial statistics for which comparable data across countries is available. For Production, data comprise Indices of industrial production (IIP) for total industry, manufacturing, energy and crude petroleum; and further disaggregation of manufacturing production for intermediate goods and for investment goods and crude steel. For others, they comprise retail trade and registration of passenger cars; and permits issued and work started for dwellings. Considerable effort has been made to ensure that the data are internationally comparable across all countries presented, coverage for as many countries as possible, and that all the subjects have reasonable length of time-series to assist analysis. Most data are available monthly and are presented as an index (where the year 2010 is the base year) or as a level depending on which measure is seen as the most appropriate and/or useful in the economic analysis context. Due to differences in statistical or economic environment at country level, however, availability of data varies from one country to another.

The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the OECD Annual National Accounts database. However, timely data issues may arise and affect individual series and/or individual countries. Sectors differ from each other with respect to their productivity growth. Understanding the drivers of productivity growth at the total economy level requires an understanding of the contribution of each sector. Data of real gross value added, labour compensation, hours worked and employment are sourced from the OECD Annual National Accounts.

Distribution of graduates/new entrants by gender, country of origin and age as well as the proportion of each tertiary educational level over the total of first-time graduates and new entrants at tertiary level.

The OECD has collected data for public expenditure on labour market programmes (LMPs) continuously since the mid-1980s. For most longstanding Member countries, data according to a consistent classification system and definition of scope are available for reference years 1985 to 2002. Starting with reference year 1998, Eurostat started collecting and publishing data according to a somewhat different classification system and definition of scope. In line with agreements for bilateral coordination of data collection, the OECD after some time adopted - for non-Eurostat OECD Member countries as well as Eurostat countries – most of the features of the Eurostat system. This allows the OECD to use data collected by Eurostat rather than making a separate data request to the 20 Eurostat countries that are members of the OECD. OECD data according to the "new" classification and definition of scope are generally available for reference year 2002 onwards, or 1998 onwards for Eurostat countries. These data are often used in time-series applications, e.g. for documenting long-term trends in total social expenditure (ìn which labour market programmes are one component), or in time-series regressions that attempt to estimate the impact of training programmes vs. job-creation programmes on unemployment. It is no longer practicable to do such work using only the "old" data which stop in 2002 or the "new" data which start in 2002 or 1998. If the two data sets are combined using crude extrapolation and splicing techniques, time-series movements will result primarily from statistical breaks (i.e. changes in definition and coverage of the statistics) rather than real changes in spending patterns. The unit of measure used depends on the members in dimension 'Country', 'Measure'

The magnitude of government debt, and public sector debt likewise, depends on the coverage of instruments used and available data. To accommodate a fair international comparison of related indicators, the IMF, the OECD and the World Bank have agreed to define various debt measures depending on the coverage or non-coverage of instruments: D1 to D4. The D1-D4 presentation classifies gross government debt and public sector debt into four separate categories, as defined in the 2012 IMF Staff Discussion Note: “What Lies Beneath: The Statistical Definition of Public Sector Debt”. This coverage of instruments according to this classification ranges from a narrow definition including only debt securities and loans (D1) to a fully comprehensive definition covering all six debt instruments (D4), as defined in the Public Sector Debt Statistics Guide for User and Compilers, and the Government Finance Statistics Manual 2014. For more information, please see the document:

The Public Sector Debt database includes quarterly detailed information on all liabilities which constitute debt instruments, by initial and residual maturity, which are held by the government, and more broadly the public sector. The debt instruments are those instruments that require the payment of principal and interest or both at some point(s) in the future. All liabilities are considered debt, except liabilities in the form of equity and investment fund shares and, financial derivatives and employee stock options.

This dataset contains Purchasing Power Parities (PPPs) for all OECD countries. PPPs are the rates of currency conversion that eliminate the differences in price levels between countries. Per capita volume indices based on PPP converted data reflect only differences in the volume of goods and services produced. Comparative price levels are defined as the ratios of PPPs to exchange rates. They provide measures of the differences in price levels between countries. The PPPs are given in national currency units per US dollar. The price levels and volume indices derived using these PPPs have been rebased on the OECD average. Per capita volume indices should not be used to rank countries as PPPs are statistical constructs rather than precise measures. Minor differences between countries should be interpreted with caution.

OECD has extracted monthly trade data from the UN Monthly Comtrade database, and aggregates the quarterly and annual frequencies by summing up the months. This may create discrepancies with annual trade figures as presented in International Trade by Commodity Statistics (ITCS). UN Monthly Comtrade (beta version) contains detailed merchandise trade data provided by countries (or areas) to the United Nations Statistics Division, Department of Economic and Social Affairs (UNSD/DESA). Values are expressed in United States dollars (USD) and refer to declared transaction values. All exports are valued f.o.b. (free on board) and imports are valued c.i.f. (including cost, insurance, freight), except the imports of Canada and Mexico which are valued f.o.b. Detailed country metadata (currency conversion rates, information in HS classifications and data publication dates) can be found from the metadata file at the UN Monthly Comtrade website under the heading Metadata.

The OECD's quarterly national accounts (QNA) dataset presents data collected from all the OECD member countries and some other major economies on the basis of a standardised questionnaire. It contains a wide selection of generally seasonally adjusted quarterly series most widely used for economic analysis from 1960 or whenever available:

This database provides a set of indicators that reflect the level and structure of central government support for business R&D; in form of R&D; tax incentives and direct funding across OECD member countries and ten non-member economies (Argentina, Brazil, Bulgaria, Croatia, Cyprus, People's Republic of China, Romania, Russian Federation, and South Africa). This includes time-series indicators of tax expenditures for R&D;, based on the latest 2017 OECD data collection on tax incentive support for R&D; expenditures that was completed in July 2017. These estimates of the cost of R&D; tax relief have been combined with data on direct R&D; funding, as compiled by National Statistical Offices based on reports from firms, in order to provide a more complete picture of government efforts to promote business R&D.; The latest indicators and information on R&D; tax incentives also feature on the dedicated OECD website Measuring R&D; tax incentives.Tax expenditures are deviations from a benchmark tax system (OECD, 2010) and countries use different national benchmarks. Available estimates typically reflect the sum of foregone tax revenues – on an accruals basis – and refunds where applicable, with no or minimal adjustments for behavior effects. Some countries only report claims realised in a given year (cash basis), while others report losses to government on an accrual basis, excluding claims referring to earlier periods and including claims for current R&D; to be used in the future. For general and country-specific notes on the estimates of government tax relief for R&D; expenditures (GTARD), see http://www.oecd.org/sti/rd-tax-stats-gtard-notes.pdfThe sources for the other indicators (direct funding of BERD, BERD and GDP) include the OECD databases on Main Science and Technology Indicators and Eurostat R&D; statistics.

The reference series used in the publication are: GDP for tax reporting years at market prices, national currency Exchange rates national currency per US dollar Population These data are extracted from various datasets managed by OECD directorates. The figures presented here are those used in creating the latest Revenue Statistics publication. These datasets are updated periodically during the year and therefore the figures in the latest versions may differ from those implied in the publication.

This dataset presents reference statistics (GDP, Total Government Expenditure, deflators, etc.) that are used to calculate some of the indicators on educational expenditure included in the indicators dataset.

The Regional database contains annual data from 1995 to the most recent available year (generally 2022 for demographic and labor market data, 2021 for regional accounts, innovation and social statistics). 

The Regional database contains annual data from 1995 to the most recent available year (generally 2018 for demographic and labor market data, 2017 for regional accounts, innovation and social statistics). The data collection is undertaken by the Center for Entrepreneurship, SMEs, Regions and Cities (CFE). Statistics are collected through an annual questionnaire sent to the delegates of the Working Party on Territorial Indicators (WPTI), and via downloads from the web-sites of National Statistical Offices and Eurostat

The PMR sector indicators measure the degree to which laws and policies promote or inhibit competition in seven network sectors (electricity, natural gas, air transport, rail transport, road transport, water transport and e-communications) and in eight service sectors (lawyers, notaries, accountants, civil engineers, architects, estate agents, retail trade and retail sales of medicines). The seven indicators for the network sectors are aggregated into a single indicator of regulation in network sectors. For more information:

Revenue Statistics in LAC Countries is a joint publication by the OECD Centre for Tax Policy and Administration, the OECD Development Centre, the Economic Commission for Latin America and the Caribbean (ECLAC) , the Inter-American Center for Tax Administrations (CIAT) and the Interamerican Development Bank (IDB). It presents detailed, internationally comparable data on tax revenues for 24 Latin American and Caribbean economies, two of which (Chile and Mexico) are OECD members. Its approach is based on the well-established methodology of the OECD Revenue Statistics (OECD, 2016), which has become an essential reference source for OECD member countries. Comparisons are also made with the average for OECD economies. Comparable tables show total tax revenue data and by tax as a percentage of GDP, and, for the different types of taxes, as a share of total taxation. Detailed country tables show information in national currency values

Data on government sector receipts, and on taxes in particular, are basic inputs to most structural economic descriptions and economic analyses and are increasingly used in international comparisons. This annual database presents a unique set of detailed and internationally comparable tax data in a common format for all OECD countries.

Reference Series - Latin American Countries Source: OECD National Accounts data for Chile and Mexico and official National Accounts data for the other countries

A key set of information for policy analysis is i) how much revenue is collected; ii) in what ways is it collected; iii) from which institutional units of the economy are revenues raised for each particular financing scheme; and iv) which financing schemes receive those revenues. This dataset provides information about the contribution mechanisms the particular financing schemes use to raise their revenues. Understanding the nature of the flows is of importance from the perspective of both health and public finance policy. For example, the classification of revenues make it possible to distinguish between public and private funding of health care finance. Understanding how resources are raised by financing schemes is important for many countries, as many health systems are struggling with the issue of funding. The classification of revenues of financing schemes is suitable for tracking the collection mechanisms of a financing framework. Furthermore, the new classification makes it possible to analyse the contribution of the institutional units to health financing.

The OECD Secretariat collects a wide range of statistics on businesses and business activity. This database features the data collection of the Statistics Directorate relating to a number of key variables, such as value added, operating surplus, employment, and the number of business units, for example, broken down by 4-digit International Standard of Industrial Classification (ISIC Revision 4) industry groups (including the service sector)), referred to as the Structural Statistics on Industry and Services (SSIS) database; and by size class; referred to as the Business Statistics by Size Class (BSC) database.

Trade in services drives the exchange of ideas, know-how and technology. It helps firms cut costs, increase productivity, participate in global value chains and boost competitiveness. Consumers benefit from lower prices and greater choice. However, international trade in services is often impeded by trade and investment barriers and domestic regulations. The Service Trade Restrictions Index (STRI) helps identify which policy measures restrict trade. It provides policy makers and negotiators with information and measurement tools to open up international trade in services and negotiate international trade agreements. It can also help governments identify best practice and then focus their domestic reform efforts on priority sectors and measures. The STRI indices take the value from 0 to 1, where 0 is completely open and 1 is completely closed. They are calculated on the basis of information in the STRI database which reports regulation currently in force.

This indicator shows the percentage of international students in each field of education.

The Short-Term Labour Market Statistics dataset contains predominantly quarterly labour statistics, and associated statistical methodological information, for the 35 OECD member countries and selected other economies. The Short-Term Labour Market Statistics dataset covers countries that compile labour statistics from sample household surveys on a monthly or quarterly basis. It is widely accepted that household surveys are the best source for labour market key statistics. In such surveys, information is collected from people living in households through a representative sample and the surveys are based on standard methodology and procedures used internationally. The subjects available cover: working age population by age; active and inactive labour force by age; employment by economic activity, by working time and by status; and, unemployment (including monthly harmonised unemployment) by age and by duration. Data is expressed in levels (thousands of persons) or rates (e.g. employment rate) where applicable.   Data are based on Labour Force Surveys and national information in this dataset is directly collected from the following sources:   ABS - Australian Bureau of Statistics (Australia) Statistics Canada (Canada) INE - Instituto Nacional de Estadísticas (Chile) CBS – Central Bureau of Statistics (Israel) Statistics Bureau (Japan) Statistics Korea (Korea) INEGI - Instituto Nacional de Estadísticas y Geografía (Mexico) Statistics New Zealand (New Zealand) BLS - Bureau of Labor Statistics (the United States) Eurostat (Austria, Belgium, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Luxembourg, the Netherlands, Norway, Poland, Portugal, the Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom).

Social expenditure aggregates: The OECD Social Expenditure Database (SOCX) has been developed in order to serve a growing need for indicators of social policy. It includes reliable and internationally comparable statistics on public and mandatory and voluntary private social expenditure at programme level. SOCX provides a unique tool for monitoring trends in aggregate social expenditure and analysing changes in its composition.

The OECD Social Expenditure Database (SOCX) has been developed in order to serve a growing need for indicators of social policy. It includes reliable and internationally comparable statistics on public and mandatory and voluntary private social expenditure at programme level. SOCX provides a unique tool for monitoring trends in aggregate social expenditure and analysing changes in its composition. It covers 35 OECD countries for the period 1980-2013/14 and estimates for aggregates for 2014-16. The main social policy areas are as follows: Old age, Survivors, Incapacity-related benefits, Health, Family, Active labor market programmes, Unemployment, Housing, and Other social policy areas. This version also includes estimates of net total social spending for 2013 for 34 OECD countries.

The SIGI is built on 27 innovative variables measuring discriminatory social institutions, which are grouped into 4 dimensions: discrimination in the family, restricted physical integrity, restricted access to productive and financial resources, and restricted civil liberties.Lower values indicate lower levels of discrimination in social institutions: the SIGI ranges from 0% for no discrimination to 100% for very high discrimination.

The share of a population covered for a core set of health services offers an initial measure of access to care and financial protection. Most OECD countries have achieved universal or near-universal coverage for a core set of health services, which usually include consultations with doctors, tests and examinations, and hospital care.

The STAN database for industrial analysis provides analysts and researchers with a comprehensive tool for analysing industrial performance at a relatively detailed level of activity across countries. It includes annual measures of output, labour input, investment which allow users to construct a wide range of indicators to focus on areas such as productivity growth, competitiveness and general structural change. Through the use of a standard industry list, comparisons can be made across countries. The industry list provides sufficient detail to enable users to highlight high-technology sectors and is compatible with those used in related OECD databases.  STAN is primarily based on Member countries' annual National Accounts by economic activity tables compiled according to the recommendations of System of National Accounts 2008 (SNA 2008). Previous versions of STAN (from 2000) were based on SNA93 statistics. Missing detail is estimated using data from other sources such as results from national industrial surveys/censuses. Time series are extended backwards (to 1970 where possible) using vintage SNA93 or STAN estimates. Many data points in STAN are estimated and are flagged as such; they do not represent official Member countries' submissions.  The current version of STAN is based on the International Standard Industrial Classification of all economic activities, Revision 4 (ISIC Rev. 4). Earlier versions of STAN were based on ISIC Rev.3 and, prior to 2000, ISIC Rev.2 (the latter covering the manufacturing sector only). STAN is updated on a "rolling basis" with new country tables, or updated tables, being made available as soon as they are ready.

The STAN database for industrial analysis provides analysts and researchers with a comprehensive tool for analysing industrial performance at a relatively detailed level of activity across countries. It includes annual measures of output, labour input, investment which allow users to construct a wide range of indicators and to focus on areas such as productivity growth, competitiveness and general structural change.Through the use of a standard industry list, international comparisons can be made. The industry list, compatible with those used in related OECD databases, provides sufficient detail to highlight technology and digital-intensive sectors. STAN is primarily based on Member countries' annual National Accounts by economic activity tables compiled according to the recommendations of System of National Accounts 2008 (SNA 2008). Previous versions of STAN (from 2000) were based on SNA93 statistics. Missing detail is estimated using other sources of data such as national industrial surveys/censuses. Time series are extended back to the 1970's where possible. This is done using vintage SNA93 or STAN estimates. In STAN, many data points are Secretariat's estimates and are flagged to the attention of users; as such, they do not represent official Member countries' submissions. The current version of STAN is based on the International Standard Industrial Classification of all economic activities, Revision 4 (ISIC Rev. 4). Earlier versions of STAN were based on ISIC Rev. 3 and, prior to 2000, ISIC Rev. 2 (the latter covering the manufacturing sector only). STAN is published on a "rolling basis" with new, or updated, country tables being made available as soon as they are ready.

The dataset on Statistical discrepancy (Institutional Investors – Financial Balance Sheets) represents the time series of the dataset on Institutional investors' assets and liabilities (7II) along with those of the dataset on Financial Balance Sheets (720), for the financial instruments and institutional sectors which are in common to these two datasets.  Additionally, for each of the above-mentioned time series, a statistical discrepancy is reported in order to show any possible differences which may exist between the two datasets (7II and 720).  In fact, the dataset on Institutional investors' assets and liabilities (7II) constitutes an attempt to better integrate these data in the framework of the System of National Accounts 2008 (SNA 2008).  However, discrepancies may exist and may, for example, be caused by balancing practices (e.g. when sector and counterpart sector data are reconciled) in the compilation of Financial Balance Sheets at a higher level of aggregation, which may not have been carried through at a lower level of aggregation. Moreover, differences may also be caused by the use of different source data.

Excess capacity is one of the main challenges facing the global steel sector. The OECD Steelmaking Capacity database contains data on crude steelmaking capacity by economy and provides researchers and policymakers with an important tool for analysing steel capacity developments.

The OECD STRI heterogeneity indices complement the existing STRI's and presents indices of regulatory heterogeneity based on the rich information in the STRI regulatory database. The indices are built from assessing – for each country pair and each measure – whether or not the countries have the same regulation. For each country pair and each sector, the indices reflect the (weighted) share of measures for which the two countries have different regulation.

The OECD indicators of employment protection are synthetic indicators of the strictness of regulation on dismissals and the use of temporary contracts. For each year, indicators refer to regulation in force on the 1st of January. Version 1 of the indicator of strictness of employment protection - individual and collective dismissals (regular contracts) - does not incorporate all the data items of version 3 and, in particular, does not incorporate regulation of collective dismissals. You should only use version 1 if you need data for years for which neither version 2 nor 3 are available.

The OECD indicators of employment protection are synthetic indicators of the strictness of regulation on dismissals and the use of temporary contracts. For each year, indicators refer to regulation in force on the 1st of January. For more information and full methodology, see www.oecd.org/employment/protection.

The OECD indicators of employment protection are synthetic indicators of the strictness of regulation on dismissals and the use of temporary contracts. For each year, indicators refer to regulation in force on the 1st of January. For more information and full methodology, see www.oecd.org/employment/protection.

The OECD indicators of employment protection legislation evaluate the regulations on the dismissal of workers on regular contracts and the hiring of workers on temporary contracts. They cover both individual and collective dismissals.The indicators have been compiled using the Secretariat’s own reading of statutory laws, collective bargaining agreements and case law as well as contributions from officials from OECD member countries and advice from country experts

Student-teacher ratio refers to the average number of students per teacher, while average class size is the average number of students in a classroom.

The subnational government finance dataset presents data on the institutional organisation at local and regional levels as well as on public finance. Financial data cover the general government sector and subnational government subsector (state and local government levels) in the 35 OECD member countries and in the EU. Four main dimensions are presented: expenditure (including investment), revenue, budget balance and debt. The dataset is released as a beta version. Data at country level are derived mainly from the OECD National Accounts harmonised according to the new standards of the System of National Accounts (SNA) 2008, implemented by most OECD countries since December 2014. They are complemented by data from Eurostat, IMF (Australia, Chile), and national statistical institutes for some countries or indicators (in particular, territorial organisation). Data were extracted in February 2017 and are from 2015, unless otherwise specified

Data cited at: OECD (2020), Suicide rates (indicator). doi: 10.1787/a82f3459-en (Accessed on 18 August 2020) Suicide rates are defined as the deaths deliberately initiated and performed by a person in the full knowledge or expectation of its fatal outcome. Comparability of data between countries is affected by a number of reporting criteria, including how a person's intention of killing themselves is ascertained, who is responsible for completing the death certificate, whether a forensic investigation is carried out, and the provisions for confidentiality of the cause of death. Caution is required therefore in interpreting variations across countries. The rates have been directly age-standardised to the 2010 OECD population to remove variations arising from differences in age structures across countries and over time. The original source of the data is the WHO Mortality Database. This indicator is presented as a total and per gender and is measured in terms of deaths per 100 000 inhabitants (total), per 100 000 men and per 100 000 women.

The OECD Sustainable Ocean Economy Database synthesizes available ocean-related datasets and indicators from across the Organisation to improve their discoverability and comparability. The database brings together relevant indicators from the Environment Directorate (ENV), the Trade and Agriculture Directorate (TAD), the Centre for Entrepreneurship, SMEs, Regions and Cities (CFE), the International Transport Forum (ITF), the International Energy Agency (IEA), and others.

Statutory corporate income tax rate - This table shows 'basic' (non-targeted) central, sub-central and combined (statutory) corporate income tax rates. Where a progressive (as opposed to flat) rate structure applies, the top marginal rate is shown.

Targeted statutory corporate income tax rate - This table reports central, sub-central and combined corporate income tax rates typically applying for or targeted at 'small (incorporated) business', where such 'targeting' is on the basis of size alone (e.g. number of employees, amount of assets, turnover or taxable income) and not on the basis of expenditures or other targeting criteria. A 'small business corporate tax rate' may be a special statutory corporate tax rate applicable to (all or part of) the taxable income of qualifying 'small' firms (e.g., meeting a turnover, income, or asset test), or an effective corporate tax rate below the basic statutory corporate rate provided through a tax deduction or credit for 'small' firms determined as a percentage of qualifying taxable income (e.g., up to a given threshold). If corporate income is taxed at progressive rates, the rate typically applying for 'small' firms should be reported. Where the central government, or sub-central government, or both, have a lower small business tax rate, the applicable central and sub-central rates are both shown (to enable a combined rate calculation). Thus, for example, where only the sub-central government has a small business rate, the basic central corporate income tax rate is shown in order to compute the combined central and sub-central tax rate on small business (a cross-check with Table II.3 shows whether the central or sub-central rate is basic or not).

Overall statutory tax rates on dividend income- reports effective statutory tax rates on distributions of domestic source income to a resident individual shareholder, taking account of corporate income tax, personal income tax and any type of integration or relief to reduce the effects of double taxation. PIT: Personal Income Tax CIT: Corporate Income Tax CL - Classical system (dividend income is taxed at the shareholder level in the same way as other types of capital income (e.g. interest income) MCL - Modified classical system (dividend income taxed at preferantial rates (e.g. compared to interest income) at the shareholder level. FI - Full imputation (dividend tax credit at shareholder level for underlying corporate profits tax) PI - Partial imputation (dividend tax credit at shareholder level for part of underlying corporate profits tax) PIN - Partial inclusion (a part of received dividends is included as taxable income at the shareholder level) SR - Split rate system (distributed dividends are taxed at higher rates than retained earnings at the corporate level) NST - No shareholder taxation of dividends (no other tax than the tax on corporate profits) CD - Corporate deduction (corporate level deduction, fully or partly, in respect of dividend paid) OTH - Other types of systems